The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Engineering Oxygen Vacancies in a Polysulfide‐Blocking Layer with Enhanced Catalytic Ability
Abstract
The practical application of the lithium–sulfur (Li–S) battery is seriously restricted by its shuttle effect, low conductivity, and low sulfur loading. Herein, first‐principles calculations are conducted to verify that the introduction of oxygen vacancies in TiO 2 not only enhances polysulfide adsorption but also greatly improves the catalytic ability and both the ion and electron conductivities. A commercial polypropylene (PP) separator decorated with TiO 2 nanosheets with oxygen vacancies (OVs‐TiO 2@PP) is fabricated as a strong polysulfide barrier for the Li–S battery. The thickness of the OVs‐TiO 2 modification layer is only 500 nm with a low areal mass of around 0.12 mg cm−2, which enhances the fast lithium‐ion penetration and the high energy density of the whole cell. As a result, the cell with the OVs‐TiO 2@PP separator exhibits a stable electrochemical behavior at 2.0 C over 500 cycles, even under a high sulfur loading of 7.1 mg cm−2, and an areal capacity of 5.83 mAh cm−2 remains after 100 cycles. The proposed strategy of engineering oxygen vacancies is expected to have wide applications in Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Self-citationMetal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Wan, J., Chen, W., Jia, C., Zheng, L., Dong, J., Zheng, X., Wang, Y., Yan, W., Chen, C., Peng, Q., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705369 · Cited by 1,036
MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
He, J., Chen, Y., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00893k · Cited by 565
Song, Y., Zhao, W., Kong, L., Zhang, L., Zhu, X., Shao, Y., Ding, F., Zhang, Q., Sun, J., & Liu, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01402g · Cited by 539
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering
Wang, Y., Zhang, R., Chen, J., Wu, H., Lu, S., Wang, K., Li, H., Harris, C. J., Xi, K., Kumar, R. V., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900953 · Cited by 447
Self-citationZhong, Y., Chao, D., Deng, S., Zhan, J., Fang, R., Xia, Y., Wang, Y., Wang, X., Xia, X., & Tu, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706391 · Cited by 428
EELS analysis of cation valence states and oxygen vacancies in magnetic oxides
Wang, Z. L., Yin, J. S., & Jiang, Y. D. (2000) · Micron · doi:10.1016/s0968-4328(99)00139-0 · Cited by 388
2D MoN‐VN Heterostructure To Regulate Polysulfides for Highly Efficient Lithium‐Sulfur Batteries
Ye, C., Jiao, Y., Jin, H., Slattery, A. D., Davey, K., Wang, H., & Qiao, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810579 · Cited by 385
Implanting Atomic Cobalt within Mesoporous Carbon toward Highly Stable Lithium–Sulfur Batteries
Xie, J., Li, B., Peng, H., Song, Y., Zhao, M., Chen, X., Zhang, Q., & Huang, J. (2019) · Advanced Materials · doi:10.1002/adma.201903813 · Cited by 377
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Zhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Hong, X.-J., Song, C.-L., Yang, Y., Tan, H.-C., Li, G.-H., Cai, Y.-P., & Wang, H. (2019) · ACS Nano · doi:10.1021/acsnano.8b08155 · Cited by 301
Self-citationMa, L., Zhang, W., Wang, L., Hu, Y., Zhu, G., Wang, Y., Chen, R., Chen, T., Tie, Z., Liu, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b01763 · Cited by 243
Salhabi, E. H. M., Zhao, J., Wang, J., Yang, M., Wang, B., & Wang, D. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201903295 · Cited by 187
Kim, J.-H., Lee, Y.-H., Cho, S.-J., Gwon, J.-G., Cho, H.-J., Jang, M., Lee, S.-Y., & Lee, S.-Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee01879k · Cited by 175
Deng, D. R., Xue, F., Bai, C.-D., Lei, J., Yuan, R., Zheng, M. S., & Dong, Q. F. (2018) · ACS Nano · doi:10.1021/acsnano.8b05534 · Cited by 169
Luo, L., Chung, S., Asl, H. Y., & Manthiram, A. (2018) · Advanced Materials · doi:10.1002/adma.201804149 · Cited by 153
A multi-shelled CoP nanosphere modified separator for highly efficient Li–S batteries
Chen, X., Ding, X., Wang, C., Feng, Z., Xu, L., Gao, X. P., Zhai, Y., & Wang, D. (2018) · Nanoscale · doi:10.1039/c8nr03854f · Cited by 132
Kim, J. H., Jung, G. Y., Lee, Y., Kim, J. H., Lee, S., Kwak, S. K., & Lee, S. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04830 · Cited by 44
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Yao, W., Tian, C., Yang, C., Xu, J., Meng, Y., Manke, I., Chen, N., Wu, Z., Zhan, L., Wang, Y., et al. (2022) · Advanced Materials · doi:10.1002/adma.202106370 · Cited by 358
Han, Z., Gao, R., Wang, T., Tao, S., Jia, Y., Lao, Z., Zhang, M., Zhou, J., Li, C., Piao, Z., et al. (2023) · Nature Catalysis · doi:10.1038/s41929-023-01041-z · Cited by 358
Interface engineering toward stable lithium–sulfur batteries
Guo, Y., Niu, Q., Pei, F., Wang, Q., Zhang, Y., Du, L., Zhang, Y., Zhang, Y., Zhang, Y., Fan, L., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee04183b · Cited by 322
Metadata
- Authors
- Li, Z., Zhou, C., Hua, J., Hong, X., Sun, C., Li, H., Xu, X., & Mai, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-01-29
- Volume
- 32
- Issue
- 10
- Pages
- e1907444-e1907444
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3003306947
- Cited by
- 292
- References
- 27
- FWCI
- 15.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.