The DOI matches its Crossref record; 148 of the 148 references it cites were found in a registry or an index.
Defect Engineering for Fuel‐Cell Electrocatalysts
Abstract
The commercialization of fuel cells, such as proton exchange membrane fuel cells and direct methanol/formic acid fuel cells, is hampered by their poor stability, high cost, fuel crossover, and the sluggish kinetics of platinum (Pt) and Pt‐based electrocatalysts for both the cathodic oxygen reduction reaction (ORR) and the anodic hydrogen oxidation reaction (HOR) or small molecule oxidation reaction (SMOR). Thus far, the exploitation of active and stable electrocatalysts has been the most promising strategy to improve the performance of fuel cells. Accordingly, increasing attention is being devoted to modulating the surface/interface electronic structure of electrocatalysts and optimizing the adsorption energy of intermediate species by defect engineering to enhance their catalytic performance. Defect engineering is introduced in terms of defect definition, classification, characterization, construction, and understanding. Subsequently, the latest advances in defective electrocatalysts for ORR and HOR/SMOR in fuel cells are scientifically and systematically summarized. Furthermore, the structure–activity relationships between defect engineering and electrocatalytic ability are further illustrated by coupling experimental results and theoretical calculations. With a deeper understanding of these complex relationships, the integration of defective electrocatalysts into single fuel‐cell systems is also discussed. Finally, the potential challenges and prospects of defective electrocatalysts are further proposed, covering controllable preparation, in situ characterization, and commercial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Combining theory and experiment in electrocatalysis: Insights into materials design
Seh, Z. W., Kibsgaard, J., Dickens, C. F., Chorkendorff, I., Nørskov, J. K., & Jaramillo, T. F. (2017) · Science · doi:10.1126/science.aad4998 · Cited by 12,114
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Nitrogen-Doped Carbon Nanotube Arrays with High Electrocatalytic Activity for Oxygen Reduction
Gong, K., Du, F., Xia, Z., Durstock, M., & Dai, L. (2009) · Science · doi:10.1126/science.1168049 · Cited by 7,188
Carbon-Based Supercapacitors Produced by Activation of Graphene
Zhu, Y., Murali, S., Stoller, M. D., Ganesh, K. J., Cai, W., Ferreira, P. J., Pirkle, A., Wallace, R. M., Cychosz, K. A., Thommes, M., et al. (2011) · Science · doi:10.1126/science.1200770 · Cited by 6,140
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions
Jiao, Y., Zheng, Y., Jaroniec, M., & Qiao, S. Z. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00470a · Cited by 5,388
Guo, D., Shibuya, R., Akiba, C., Saji, S., Kondo, T., & Nakamura, J. (2016) · Science · doi:10.1126/science.aad0832 · Cited by 4,230
A metal-free bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions
Zhang, J., Zhao, Z., Xia, Z., & Dai, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.48 · Cited by 3,094
Xie, J., Zhang, H., Li, S., Wang, R., Sun, X., Zhou, M., Zhou, J., Lou, X. W. (., & Xie, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302685 · Cited by 3,079
Cited by
Electromagnetic microwave absorption theory and recent achievements in microwave absorbers
Zeng, X., Cheng, X., Yu, R., & Stucky, G. D. (2020) · Carbon · doi:10.1016/j.carbon.2020.07.028 · Cited by 991
Proton Exchange Membrane Fuel Cells (PEMFCs): Advances and Challenges
Tellez-Cruz, M. M., Escorihuela, J., Solorza-Feria, O., & Compañ, V. (2021) · Polymers · doi:10.3390/polym13183064 · Cited by 414
Designing High‐Valence Metal Sites for Electrochemical Water Splitting
Sun, H., Xu, X., Song, Y., Zhou, W., & Shao, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009779 · Cited by 403
Recent Progress of Vacancy Engineering for Electrochemical Energy Conversion Related Applications
Wu, Z., Zhao, Y., Jin, W., Jia, B., Wang, J., & Ma, T. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009070 · Cited by 373
Defect and Doping Co-Engineered Non-Metal Nanocarbon ORR Electrocatalyst
Zhang, J., Zhang, J., He, F., Chen, Y., Zhu, J., Wang, D., Mu, S., & Yang, H. Y. (2021) · Nano-Micro Letters · doi:10.1007/s40820-020-00579-y · Cited by 359
Self-citation
Metadata
- Authors
- Li, W., Wang, D., Zhang, Y., Tao, L., Wang, T., Zou, Y., Wang, Y., Chen, R., & Wang, S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-03-16
- Volume
- 32
- Issue
- 19
- Pages
- e1907879-e1907879
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3011703805
- Cited by
- 571
- References
- 148
- FWCI
- 17.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Defect Engineering for Fuel‐Cell Electrocatalysts. https://app.cochat.ai/papers/10.1002/adma.201907879
- The paper
- Li, W., Wang, D., Zhang, Y., Tao, L., Wang, T., Zou, Y., Wang, Y., Chen, R., & Wang, S. (2020). Defect Engineering for Fuel‐Cell Electrocatalysts. Advanced Materials. https://doi.org/10.1002/adma.201907879
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.