The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
How Reproducible are Surface Areas Calculated from the BET Equation?
Open accessAbstract
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer–Emmett–Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro‐ and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already‐measured raw adsorption isotherms were provided to sixty‐one labs, who were asked to calculate the corresponding BET areas. This round‐robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called “BET surface identification” (BETSI), expands on the well‐known Rouquerol criteria and makes an unambiguous BET area assignment possible.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Self-citationThe Chemistry and Applications of Metal-Organic Frameworks
Furukawa, H., Cordova, K. E., O’Keeffe, M., & Yaghi, O. M. (2013) · Science · doi:10.1126/science.1230444 · Cited by 16,945
Self-citationTriblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
Functional Porous Coordination Polymers
Kitagawa, S., Kitaura, R., & Noro, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300610 · Cited by 11,071
Self-citationA new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
Introduction to Metal–Organic Frameworks
Zhou, H.-C., Long, J. R., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr300014x · Cited by 7,720
Self-citationMetal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
Self-citationMetal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Self-citationFrom Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis
Corma, A. (1997) · Chemical Reviews · doi:10.1021/cr960406n · Cited by 5,791
Ordered porous materials for emerging applications
Davis, M. E. (2002) · Nature · doi:10.1038/nature00785 · Cited by 5,308
Metal–Organic Frameworks in Biomedicine
Horcajada, P., Gref, R., Baati, T., Allan, P. K., Maurin, G., Couvreur, P., Férey, G., Morris, R. E., & Serre, C. (2012) · Chemical Reviews · doi:10.1021/cr200256v · Cited by 4,168
Self-citationThe atom, the molecule, and the covalent organic framework
Diercks, C. S., & Yaghi, O. M. (2017) · Science · doi:10.1126/science.aal1585 · Cited by 3,482
Self-citationEngineering Metal Organic Frameworks for Heterogeneous Catalysis
Corma, A., García, H., & Llabrés i Xamena, F. X. (2010) · Chemical Reviews · doi:10.1021/cr9003924 · Cited by 3,478
Metal–organic frameworks: functional luminescent and photonic materials for sensing applications
Lustig, W. P., Mukherjee, S., Rudd, N. D., Desai, A. V., Li, J., & Ghosh, S. K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00930a · Cited by 3,050
Self-citationMetal–Organic Framework Materials with Ultrahigh Surface Areas: Is the Sky the Limit?
Farha, O. K., Eryazici, I., Jeong, N. C., Hauser, B. G., Wilmer, C. E., Sarjeant, A. A., Snurr, R. Q., Nguyen, S. T., Yazaydın, A. Ö., & Hupp, J. T. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3055639 · Cited by 1,958
Self-citationFarha, O. K., Özgür Yazaydın, A., Eryazici, I., Malliakas, C. D., Hauser, B. G., Kanatzidis, M. G., Nguyen, S. T., Snurr, R. Q., & Hupp, J. T. (2010) · Nature Chemistry · doi:10.1038/nchem.834 · Cited by 1,741
Self-citationOpening the Gate: Framework Flexibility in ZIF-8 Explored by Experiments and Simulations
Fairen-Jimenez, D., Moggach, S. A., Wharmby, M. T., Wright, P. A., Parsons, S., & Düren, T. (2011) · Journal of the American Chemical Society · doi:10.1021/ja202154j · Cited by 1,211
Self-citationIs the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
Moghadam, P. Z., Li, A., Wiggin, S. B., Tao, A., Maloney, A. G. P., Wood, P. A., Ward, S. C., & Fairen-Jimenez, D. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00441 · Cited by 1,082
Self-citationWalton, K. S., & Snurr, R. Q. (2007) · Journal of the American Chemical Society · doi:10.1021/ja071174k · Cited by 1,029
Self-citationBalancing volumetric and gravimetric uptake in highly porous materials for clean energy
Chen, Z., Li, P., Anderson, R., Wang, X., Zhang, X., Robison, L., Redfern, L. R., Moribe, S., Islamoglu, T., Gómez-Gualdrón, D. A., et al. (2020) · Science · doi:10.1126/science.aaz8881 · Cited by 763
Self-citationEvaluation of the BET Theory for the Characterization of Meso and Microporous MOFs
Ambroz, F., Macdonald, T. J., Martis, V., & Parkin, I. P. (2018) · Small Methods · doi:10.1002/smtd.201800173 · Cited by 748
Porous Metal–Organic Frameworks for Gas Storage and Separation: What, How, and Why?
Li, B., Wen, H.-M., Zhou, W., & Chen, B. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501586e · Cited by 636
Self-citationUltrahigh Surface Area Zirconium MOFs and Insights into the Applicability of the BET Theory
Wang, T. C., Bury, W., Gómez-Gualdrón, D. A., Vermeulen, N. A., Mondloch, J. E., Deria, P., Zhang, K., Moghadam, P. Z., Sarjeant, A. A., Snurr, R. Q., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512973b · Cited by 425
Self-citationAdsorption by Powders and Porous Solids
(2014) · Elsevier eBooks · doi:10.1016/c2010-0-66232-8 · Cited by 411
Balancing Mechanical Stability and Ultrahigh Porosity in Crystalline Framework Materials
Hönicke, I. M., Senkovska, I., Bon, V., Baburin, I. A., Bönisch, N., Raschke, S., Evans, J. D., & Kaskel, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808240 · Cited by 391
Self-citationGómez-Gualdrón, D. A., Moghadam, P. Z., Hupp, J. T., Farha, O. K., & Snurr, R. Q. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10266 · Cited by 297
Self-citationHow Reproducible Are Isotherm Measurements in Metal–Organic Frameworks?
Park, J., Howe, J. D., & Sholl, D. S. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04287 · Cited by 186
Self-citationComputer-aided discovery of a metal–organic framework with superior oxygen uptake
Moghadam, P. Z., Islamoglu, T., Goswami, S., Exley, J., Fantham, M., Kaminski, C. F., Snurr, R. Q., Farha, O. K., & Fairen-Jimenez, D. (2018) · Nature Communications · doi:10.1038/s41467-018-03892-8 · Cited by 172
Self-citationYi, S., Kurisu, K., & Hanaki, K. (2011) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0297-3 · Cited by 155
Does repeat synthesis in materials chemistry obey a power law?
Agrawal, M., Han, R., Herath, D., & Sholl, D. S. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1918484117 · Cited by 61
Self-citation
Cited by
Densified HKUST-1 Monoliths as a Route to High Volumetric and Gravimetric Hydrogen Storage Capacity
Madden, D. G., O’Nolan, D., Rampal, N., Babu, R., Çamur, C., Al Shakhs, A. N., Zhang, S.-Y., Rance, G. A., Perez, J., Maria Casati, N. P., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c04608 · Cited by 123
Self-citation
Metadata
- Authors
- Osterrieth, J. W. M., Rampersad, J., Madden, D., Rampal, N., Skoric, L., Connolly, B., Allendorf, M. D., Stavila, V., Snider, J. L., Ameloot, R., Marreiros, J., Ania, C., Azevedo, D., Vilarrasa‐Garcia, E., Santos, B. F., Bu, X., Chang, Z., Bunzen, H., Champness, N. R., Griffin, S. L., Chen, B., Lin, R., Coasne, B., Cohen, S., Moreton, J. C., Colón, Y. J., Chen, L., Clowes, R., Coudert, F., Cui, Y., Hou, B., D'Alessandro, D. M., Doheny, P. W., Dincă, M., Sun, C., Doonan, C., Huxley, M. T., Evans, J. D., Falcaro, P., Ricco, R., Farha, O., Idrees, K. B., Islamoglu, T., Feng, P., Yang, H., Forgan, R. S., Bara, D., Furukawa, S., Sanchez, E., Gascon, J., Telalović, S., Ghosh, S. K., Mukherjee, S., Hill, M. R., Sadiq, M. M., Horcajada, P., Salcedo‐Abraira, P., Kaneko, K., Kukobat, R., Kenvin, J., Keskin, S., Kitagawa, S., Otake, K., Lively, R. P., DeWitt, S. J. A., Llewellyn, P., Lotsch, B. V., Emmerling, S. T., Pütz, A. M., Martí‐Gastaldo, C., Padial, N. M., García‐Martínez, J., Linares, N., Maspoch, D., Suárez del Pino, J. A., Moghadam, P., Oktavian, R., Morris, R. E., Wheatley, P. S., Navarro, J., Petit, C., Danaci, D., Rosseinsky, M. J., Katsoulidis, A. P., Schröder, M., Han, X., Yang, S., Serre, C., Mouchaham, G., Sholl, D. S., Thyagarajan, R., Siderius, D., Snurr, R. Q., Goncalves, R. B., Telfer, S., Lee, S. J., Ting, V. P., Rowlandson, J. L., Uemura, T., Iiyuka, T., van der Veen, M. A., Rega, D., Van Speybroeck, V., Rogge, S. M. J., Lamaire, A., Walton, K. S., Bingel, L. W., Wuttke, S., Andreo, J., Yaghi, O., Zhang, B., Yavuz, C. T., Nguyen, T. S., Zamora, F., Montoro, C., Zhou, H., Kirchon, A., & Fairen‐Jimenez, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-05-23
- Volume
- 34
- Issue
- 27
- Pages
- e2201502-e2201502
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4281286553
- Cited by
- 315
- References
- 34
- FWCI
- 20.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.