The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Lithium‐Metal Foil Surface Modification: An Effective Method to Improve the Cycling Performance of Lithium‐Metal Batteries
Open accessAbstract
Lithium metal as an electrode material possesses a native surface film, which leads to a rough surface and this has a negative impact on the cycling behavior. A simple, fast, and reproducible technique is shown, which makes it possible to flatten and thin the native surface film of the lithium‐metal anode. Atomic force microscopy and scanning electron microscopy images are presented to verify the success of the method and X‐ray photoelectron spectroscopy measurements reveal that the chemical composition of the lithium surface is also changed. Furthermore, galvanostatic measurements indicate superior cycling behavior of the surface modified electrodes compared to the as‐received ones. These results demonstrate that the native surface film plays a key role in the application of lithium metal as an anode material for lithium‐metal batteries and that the shown surface modification method is an excellent tool to obtain better performing Li metal electrodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Self-citationA review of hazards associated with primary lithium and lithium-ion batteries
Lisbona, D., & Snee, T. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2011.06.022 · Cited by 701
Cited by
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Self-citationBeyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Stabilizing metal battery anodes through the design of solid electrolyte interphases
Zhao, Q., Stalin, S., & Archer, L. A. (2021) · Joule · doi:10.1016/j.joule.2021.03.024 · Cited by 629
Anode‐Free Full Cells: A Pathway to High‐Energy Density Lithium‐Metal Batteries
Nanda, S., Gupta, A., & Manthiram, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000804 · Cited by 537
Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition
Yan, C., Cheng, X., Tian, Y., Chen, X., Zhang, X., Li, W., Huang, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201707629 · Cited by 513
Metadata
- Authors
- Becking, J., Gröbmeyer, A., Kolek, M., Rodehorst, U., Schulze, S., Winter, M., Bieker, P., & Stan, M. C.
- Venue
- Advanced Materials Interfaces
- Publisher
- Wiley
- Published
- 2017-06-29
- Volume
- 4
- Issue
- 16
- ISSN
- 2196-7350 (ISSN-L)
- OpenAlex
- W2726997148
- Cited by
- 193
- References
- 2
- FWCI
- 5.59
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lithium‐Metal Foil Surface Modification: An Effective Method to Improve the Cycling Performance of Lithium‐Metal Batteries. https://app.cochat.ai/papers/10.1002/admi.201700166
- The paper
- Becking, J., Gröbmeyer, A., Kolek, M., Rodehorst, U., Schulze, S., Winter, M., Bieker, P., & Stan, M. C. (2017). Lithium‐Metal Foil Surface Modification: An Effective Method to Improve the Cycling Performance of Lithium‐Metal Batteries. Advanced Materials Interfaces. https://doi.org/10.1002/admi.201700166
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.