The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures
Abstract
Cellulose nanofibrils isolated from trees have the potential to be used as raw material for future sustainable products within the areas of packaging, textiles, biomedical devices, and furniture. However, one unsolved problem has been to convert the nanofibril‐hydrogel into a dry 3D structure. In this study, 3D printing is used to convert a cellulose nanofibril hydrogel into 3D structures with controlled architectures. Such structures collapse upon drying, but by using different drying processes the collapse can be controlled and the 3D structure can be preserved upon solidification. In addition, a conductive cellulose nanofibril ink is fabricated by adding carbon nanotubes. These findings enable the use of wood derived materials in 3D printing for fabrication of sustainable commodities such as packaging, textiles, biomedical devices, and furniture with conductive parts. Furthermore, with the introduction of biopolymers into 3D printing, the 3D printing technology itself can finally be regarded as sustainable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Self-citation
Cited by
Current advances and future perspectives of 3D printing natural-derived biopolymers
Liu, J., Sun, L., Xu, W., Wang, Q., Yu, S., & Sun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.077 · Cited by 428
Printed aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313
Additive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Metadata
- Authors
- Håkansson, K. M. O., Henriksson, I. C., de la Peña Vázquez, C., Kuzmenko, V., Markstedt, K., Enoksson, P., & Gatenholm, P.
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2016-08-29
- Volume
- 1
- Issue
- 7
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W2514990868
- Cited by
- 160
- References
- 3
- FWCI
- 5.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures. https://app.cochat.ai/papers/10.1002/admt.201600096
- The paper
- Håkansson, K. M. O., Henriksson, I. C., de la Peña Vázquez, C., Kuzmenko, V., Markstedt, K., Enoksson, P., & Gatenholm, P. (2016). Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures. Advanced Materials Technologies. https://doi.org/10.1002/admt.201600096
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
