The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Three‐Dimensional μ‐Printing: An Enabling Technology
Abstract
In this progress report the development of three‐dimensional μ‐printing and its impact as an enabling technology onto different scientific fields is reviewed. Driven by direct laser writing via two‐photon absorption, the technology has reached a level of maturity and ease of application such that 3D printing on the micrometer scale can now be considered. While the underlying technology is still developing towards higher resolution and increasing speed of fabrication, the last five years have seen new fields rising that were obviously enabled by 3D μ‐printing. Among the recent technological developments discussed in this progress report are the fields of super‐resolution lithography and spatial light modulator‐based lithography. Novel fields relying on these technological advances like aperiodic photonic structures, mechanical metamaterials, and structures for biological studies will be reviewed. A glimpse into developing research directions will also be provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Taking Cell-Matrix Adhesions to the Third Dimension
Cukierman, E., Pankov, R., Stevens, D. R., & Yamada, K. M. (2001) · Science · doi:10.1126/science.1064829 · Cited by 3,027
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
An elasto-mechanical unfeelability cloak made of pentamode metamaterials
Bückmann, T., Thiel, M., Kadic, M., Schittny, R., & Wegener, M. (2014) · Nature Communications · doi:10.1038/ncomms5130 · Cited by 623
Complex micromachines produced and driven by light
Galajda, P., & Ormos, P. (2001) · Applied Physics Letters · doi:10.1063/1.1339258 · Cited by 565
Three-Dimensional Biodegradable Structures Fabricated by Two-Photon Polymerization
Claeyssens, F., Hasan, E. A., Gaidukeviciute, A., Achilleos, D. S., Ranella, A., Reinhardt, C., Ovsianikov, A., Shizhou, X., Fotakis, C., Vamvakaki, M., et al. (2009) · Langmuir · doi:10.1021/la803803m · Cited by 187
Metadata
- Authors
- Hohmann, J. K., Renner, M., Waller, E. H., & von Freymann, G.
- Venue
- Advanced Optical Materials
- Publisher
- Wiley
- Published
- 2015-09-15
- Volume
- 3
- Issue
- 11
- Pages
- 1488-1507
- ISSN
- 2195-1071 (ISSN-L)
- OpenAlex
- W1920312808
- Cited by
- 165
- References
- 5
- FWCI
- 8.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Three‐Dimensional μ‐Printing: An Enabling Technology. https://app.cochat.ai/papers/10.1002/adom.201500328
- The paper
- Hohmann, J. K., Renner, M., Waller, E. H., & von Freymann, G. (2015). Three‐Dimensional μ‐Printing: An Enabling Technology. Advanced Optical Materials. https://doi.org/10.1002/adom.201500328
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
