The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
3D Printing of Lotus Root‐Like Biomimetic Materials for Cell Delivery and Tissue Regeneration
Open accessAbstract
Biomimetic materials have drawn more and more attention in recent years. Regeneration of large bone defects is still a major clinical challenge. In addition, vascularization plays an important role in the process of large bone regeneration and microchannel structure can induce endothelial cells to form rudimentary vasculature. In recent years, 3D printing scaffolds are major materials for large bone defect repair. However, these traditional 3D scaffolds have low porosity and nonchannel structure, which impede angiogenesis and osteogenesis. In this study, inspired by the microstructure of natural plant lotus root, biomimetic materials with lotus root‐like structures are successfully prepared via a modified 3D printing strategy. Compared with traditional 3D materials, these biomimetic materials can significantly improve in vitro cell attachment and proliferation as well as promote in vivo osteogenesis, indicating potential application for cell delivery and bone regeneration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
Wang, S., Liu, K., Yao, X., & Jiang, L. (2015) · Chemical Reviews · doi:10.1021/cr400083y · Cited by 1,646
Bioinspired Design and Assembly of Platelet Reinforced Polymer Films
Bonderer, L. J., Studart, A. R., & Gauckler, L. J. (2008) · Science · doi:10.1126/science.1148726 · Cited by 1,031
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy.
Ma, H., Feng, C., Chang, J., & Wu, C. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.026 · Cited by 512
Self-citation3D printing of Haversian bone–mimicking scaffolds for multicellular delivery in bone regeneration
Zhang, M., Lin, R., Wang, X., Xue, J., Deng, C., Feng, C., Zhuang, H., Ma, J., Qin, C., Wan, L., et al. (2020) · Science Advances · doi:10.1126/sciadv.aaz6725 · Cited by 387
Self-citationTissue Engineering and Regenerative Medicine: Achievements, Future, and Sustainability in Asia
Han, F., Wang, J., Ding, L., Hu, Y., Li, W., Yuan, Z., Guo, Q., Zhu, C., Yu, L., Wang, H., et al. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00083 · Cited by 357
Self-citation
Metadata
- Authors
- Feng, C., Zhang, W., Deng, C., Li, G., Chang, J., Zhang, Z., Jiang, X., & Wu, C.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2017-10-26
- Volume
- 4
- Issue
- 12
- Pages
- 1700401-1700401
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W2765609819
- Cited by
- 246
- References
- 3
- FWCI
- 7.33
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Printing of Lotus Root‐Like Biomimetic Materials for Cell Delivery and Tissue Regeneration. https://app.cochat.ai/papers/10.1002/advs.201700401
- The paper
- Feng, C., Zhang, W., Deng, C., Li, G., Chang, J., Zhang, Z., Jiang, X., & Wu, C. (2017). 3D Printing of Lotus Root‐Like Biomimetic Materials for Cell Delivery and Tissue Regeneration. Advanced Science. https://doi.org/10.1002/advs.201700401
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.