The DOI matches its Crossref record; 177 of the 177 references it cites were found in a registry or an index.
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Open accessAbstract
Abstract The dawn of 3D printing in medicine has given the field the hope of vitality in many patients fighting a multitude of diseases. Also entitled bioprinting, this appertains to its sequential printing of precursor ink, embodying cells and polymer/composite in a predetermined trajectory. The precursor ink, in addition to cells, is predominantly constituted of hydrogels due to its biodegradability and ability to mimic the body’s anatomy and mechanical features, e.g. bones, etc. This review paper is devoted to explicating the bioprinting (3D/4D) of alginate hydrogels, which are extracts from brown algae, through extrusion additive manufacturing. Alginates are salt derivatives of alginic acid and constitute long chains of polysaccharides, which provides pliability and gelling adeptness to their structure. Alginate hydrogel (employed for extrusion) can be pristine or composite relying on the requisite properties (target application controlled or in vivo environment), e.g. alginate-natural (gelatin/agarose/collagen/hyaluronic acid/etc) and alginate-synthetic (polyethylene glycol (PEG)/pluronic F-127/etc). Extrusion additive manufacturing of alginate is preponderate among others with its uncomplicated processing, material efficiency (cut down on wastage), and outspread adaptability for viscosities (0.03–6 * 10 4 Pa.s), but the procedure is limited by resolution (200 μ m) in addition to accuracy. However, 3D-fabricated biostructures display rigidness (unvarying with conditions) i.e. lacks a smart response, which is reassured by accounting time feature as a noteworthy accessory to printing, interpreted as 4D bioprinting. This review propounds the specific processing itinerary for alginate (meanwhile traversing across its composites/blends with natural and synthetic consideration) in extrusion along with its pre-/during/post-processing parameters intrinsic to the process. Furthermore, propensity is also presented in its (alginate extrusion processing) application for tissue engineering, i.e. bones, cartilage (joints), brain (neural), ear, heart (cardiac), eyes (corneal), etc, due to a worldwide quandary over accessibility to natural organs for diverse types of diseases. Additionally, the review contemplates recently invented advance printing, i.e. 4D printing for biotic species, with its challenges and future opportunities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Burden of liver diseases in the world
Asrani, S. K., Devarbhavi, H., Eaton, J., & Kamath, P. S. (2019) · Journal of Hepatology · doi:10.1016/j.jhep.2018.09.014 · Cited by 3,783
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
A practical guide to hydrogels for cell culture
Caliari, S. R., & Burdick, J. A. (2016) · Nature Methods · doi:10.1038/nmeth.3839 · Cited by 2,075
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Research works printed but not linked: 10
- Sandeep, 2017, Comparison and analysis of different 3d printing techniques, Int. J. Latest Trends Eng. Technol., 8, 264, 10.21172/1.841.44 · doi:10.21172/1.841.44
- Yadav, 2018, Biomimicking of hierarchal molluscan shell structure via layer by layer 3D printing, Ind. Eng. Chem. Res., 57, 10832, 10.1021/acs.iecr.8b01738 · doi:10.1021/acs.iecr.8b01738
- Christensen, 2017, Deformation compensation during buoyancy-enabled inkjet printing of three-dimensional soft tubular structures, J. Manuf. Sci. Eng., 140, 10.1115/1.4037996 · doi:10.1115/1.4037996
- Xiong, 2015, Identification of optimal printing conditions for laser printing of alginate tubular constructs, J. Manuf. Process., 20, 450, 10.1016/j.jmapro.2015.06.023 · doi:10.1016/j.jmapro.2015.06.023
- Aoun, 2015, Futuristic three-dimensional printing and personalized neurosurgery, World Neurosurg., 84, 870, 10.1016/j.wneu.2015.08.010 · doi:10.1016/j.wneu.2015.08.010
- Hudlikar, 2014, Towards the enhancement of antimicrobial efficacy and hydrophobization of chitosan, J. Chitin Chitosan Sci., 2, 273, 10.1166/jcc.2014.1080 · doi:10.1166/jcc.2014.1080
- Roushangar Zineh, 2018, Mechanical and biological performance of printed alginate/methylcellulose/halloysite nanotube/polyvinylidene fluoride bio-scaffolds, Mater. Sci. Eng. C, 92, 779, 10.1016/j.msec.2018.07.035 · doi:10.1016/j.msec.2018.07.035
- Suhail, 2015, Fabrication of bioactive nano assimilated polymeric scaffold for the metamorphosis of organs or tissues: triumph, confrontation and prospective, J. Bionanoscience, 9, 167, 10.1166/jbns.2015.1295 · doi:10.1166/jbns.2015.1295
- Olubamiji, 2017, Traditional invasive and synchrotron-based noninvasive assessments of three-dimensional-printed hybrid cartilage constructs in situ, Tissue Eng. Part C Methods, 23, 156, 10.1089/ten.tec.2016.0368 · doi:10.1089/ten.tec.2016.0368
- Newman, 2018, What does the liver do?, MedialNewsToday
Cited by
Structures, Properties and Applications of Alginates
Abka-khajouei, R., Tounsi, L., Shahabi, N., Patel, A. K., Abdelkafi, S., & Michaud, P. (2022) · Marine Drugs · doi:10.3390/md20060364 · Cited by 769
Zhang, K., Feng, Q., Fang, Z., Gu, L., & Bian, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00071 · Cited by 394
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Development of alginate-based hydrogels: Crosslinking strategies and biomedical applications
Tan, J., Luo, Y., Guo, Y., Zhou, Y., Liao, X., Li, D., Lai, X., & Liu, Y. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124275 · Cited by 308
Advancements in MXene-Polymer composites for various biomedical applications
George, S. M., & Kandasubramanian, B. (2020) · Ceramics International · doi:10.1016/j.ceramint.2019.12.257 · Cited by 265
Self-citation
Metadata
- Authors
- Rastogi, P., & Kandasubramanian, B.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2019-09-10
- Volume
- 11
- Issue
- 4
- Pages
- 042001
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2958832813
- Cited by
- 564
- References
- 177
- FWCI
- 20.57
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- publishingsupport.iopscience.iop.org/iop-standard/v1 (vor)
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review of alginate-based hydrogel bioprinting for application in tissue engineering. https://app.cochat.ai/papers/10.1088/1758-5090/ab331e
- The paper
- Rastogi, P., & Kandasubramanian, B. (2019). Review of alginate-based hydrogel bioprinting for application in tissue engineering. Biofabrication. https://doi.org/10.1088/1758-5090/ab331e
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.