A Threshold Switching Selector Based on Highly Ordered Ag Nanodots for X‐Point Memory Applications
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Leakage interference between memory cells is the primary obstacle for enlarging X‐point memory arrays. Metal‐filament threshold switches, possessing excellent selectivity and low leakage current, are developed in series with memory cells to reduce sneak path current and lower power consumption. However, these selectors typically have limited on‐state currents (≤10 µA), which are insufficient for memory RESET operations. Here, a strategy is proposed to achieve sufficiently large RESET current (≈2.3 mA) by introducing highly ordered Ag nanodots to the threshold switch. Compared to the Ag thin film case, Ag nanodots as active electrode could avoid excessive Ag atoms migration into solid electrolyte during operations, which causes stable conductive filament growth. Furthermore, Ag nanodots with rapid thermal processing contribute to forming multiple weak Ag filaments at a lower voltage and then spontaneous rupture as the applied voltage reduced, according to quantized conductance and simulation analysis. Impressively, the Ag nanodots based threshold switch, which is bidirectional and truly electroforming‐free, demonstrates extremely high selectivity >10 9, ultralow leakage current <1 pA, very steep slope of 0.65 mV dec−1, and good thermal stability up to 200 °C, and further represents significant suppression of leakage currents and excellent performances for SET/RESET operations in the one‐selector‐one‐resistor configuration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Memristors with diffusive dynamics as synaptic emulators for neuromorphic computing
Wang, Z., Joshi, S., Savel’ev, S. E., Jiang, H., Midya, R., Lin, P., Hu, M., Ge, N., Strachan, J. P., Li, Z., et al. (2017) · Nature Materials · doi:10.1038/nmat4756 · Cited by 2,358
Face classification using electronic synapses
Yao, P., Wu, H., Gao, B., Eryilmaz, S. B., Huang, X., Zhang, W., Zhang, Q., Deng, N., Shi, L., Wong, H.-S. P., et al. (2017) · Nature Communications · doi:10.1038/ncomms15199 · Cited by 909
Self-citationNanobatteries in redox-based resistive switches require extension of memristor theory
Valov, I., Linn, E., Tappertzhofen, S., Schmelzer, S., van den Hurk, J., Lentz, F., & Waser, R. (2013) · Nature Communications · doi:10.1038/ncomms2784 · Cited by 587
Three-dimensional crossbar arrays of self-rectifying Si/SiO2/Si memristors
Li, C., Han, L., Jiang, H., Jang, M.-H., Lin, P., Wu, Q., Barnell, M., Yang, J. J., Xin, H. L., & Xia, Q. (2017) · Nature Communications · doi:10.1038/ncomms15666 · Cited by 229
(2014) · doi:10.1109/ted.2015.2426717 · Cited by 110
Truly Electroforming‐Free and Low‐Energy Memristors with Preconditioned Conductive Tunneling Paths
Yoon, J. H., Zhang, J., Ren, X., Wang, Z., Wu, H., Li, Z., Barnell, M., Wu, Q., Lauhon, L. J., Xia, Q., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702010 · Cited by 95
Self-citation
Cited by
Semiconductor Quantum Dots for Memories and Neuromorphic Computing Systems
Lv, Z., Wang, Y., Chen, J., Wang, J., Zhou, Y., & Han, S.-T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00730 · Cited by 364
Banerjee, W., Kashir, A., & Kamba, S. (2022) · Small · doi:10.1002/smll.202107575 · Cited by 277
Hardware Implementation of Neuromorphic Computing Using Large‐Scale Memristor Crossbar Arrays
Li, Y., & Ang, K.-W. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202000137 · Cited by 220
Self-citationSelf‐Rectifying Memristors for Three‐Dimensional In‐Memory Computing
Ren, S., Dong, A., Yang, L., Xue, Y., Li, J., Yu, Y., Zhou, H., Zuo, W., Li, Y., Cheng, W., et al. (2024) · Advanced Materials · doi:10.1002/adma.202307218 · Cited by 96
Self-citationArtificial Neural Networks Based on Memristive Devices: From Device to System
Huang, H.-M., Wang, Z., Wang, T., Xiao, Y., & Guo, X. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000149 · Cited by 82
Metadata
- Authors
- Hua, Q., Wu, H., Gao, B., Zhao, M., Li, Y., Li, X., Hou, X., (Marvin) Chang, M., Zhou, P., & Qian, H.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-04-02
- Volume
- 6
- Issue
- 10
- Pages
- 1900024-1900024
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W2927922499
- Cited by
- 147
- References
- 6
- FWCI
- 6.70
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.