The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Injectable and Conductive Granular Hydrogels for 3D Printing and Electroactive Tissue Support
Open accessAbstract
Conductive hydrogels are attractive to mimic electrophysiological environments of biological tissues and toward therapeutic applications. Injectable and conductive hydrogels are of particular interest for applications in 3D printing or for direct injection into tissues; however, current approaches to add conductivity to hydrogels are insufficient, leading to poor gelation, brittle properties, or insufficient conductivity. Here, an approach is developed using the jamming of microgels to form injectable granular hydrogels, where i) hydrogel microparticles (i.e., microgels) are formed with water‐in‐oil emulsions on microfluidics, ii) microgels are modified via an in situ metal reduction process, and iii) the microgels are jammed into a solid, permitting easy extrusion from a syringe. Due to the presence of metal nanoparticles at the jammed interface with high surface area in this unique design, the granular hydrogels have greater conductivity than non‐particle (i.e., bulk) hydrogels treated similarly or granular hydrogels either without metal nanoparticles or containing encapsulated nanoparticles. The conductivity of the granular hydrogels is easily modified through mixing conductive and non‐conductive microgels during fabrication and they can be applied to the 3D printing of lattices and to bridge muscle defects. The versatility of this conductive granular hydrogel will permit numerous applications where conductive materials are needed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conducting polymers in biomedical engineering
Guimard, N. K., Gomez, N., & Schmidt, C. E. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.012 · Cited by 1,599
Carbon-Nanotube-Embedded Hydrogel Sheets for Engineering Cardiac Constructs and Bioactuators
Shin, S. R., Jung, S. M., Zalabany, M., Kim, K., Zorlutuna, P., Kim, S. B., Nikkhah, M., Khabiry, M., Azize, M., Kong, J., et al. (2013) · ACS Nano · doi:10.1021/nn305559j · Cited by 946
Cited by
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Mussel-inspired hydrogels: From design principles to promising applications
Zhang, C., Wu, B., Zhou, Y., Zhou, F., Liu, W., & Wang, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00849g · Cited by 653
Chemically Modified Biopolymers for the Formation of Biomedical Hydrogels
Muir, V. G., & Burdick, J. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00923 · Cited by 604
Self-citationQi, X., Huang, Y., You, S., Xiang, Y., Cai, E., Mao, R., Pan, W., Tong, X., Dong, W., Ye, F., et al. (2022) · Advanced Science · doi:10.1002/advs.202106015 · Cited by 519
Polyphenol scaffolds in tissue engineering
Zhang, X., Li, Z., Yang, P., Duan, G., Liu, X., Gu, Z., & Li, Y. (2021) · Materials Horizons · doi:10.1039/d0mh01317j · Cited by 417
Metadata
- Authors
- Shin, M., Song, K. H., Burrell, J. C., Cullen, D. K., & Burdick, J. A.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-08-21
- Volume
- 6
- Issue
- 20
- Pages
- 1901229-1901229
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W2969608693
- Cited by
- 196
- References
- 2
- FWCI
- 5.59
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Injectable and Conductive Granular Hydrogels for 3D Printing and Electroactive Tissue Support. https://app.cochat.ai/papers/10.1002/advs.201901229
- The paper
- Shin, M., Song, K. H., Burrell, J. C., Cullen, D. K., & Burdick, J. A. (2019). Injectable and Conductive Granular Hydrogels for 3D Printing and Electroactive Tissue Support. Advanced Science. https://doi.org/10.1002/advs.201901229
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.