The DOI matches its Crossref record; 98 of the 98 references it cites were found in a registry or an index.
Engineering Origami: A Comprehensive Review of Recent Applications, Design Methods, and Tools
Open accessAbstract
Origami‐based designs refer to the application of the ancient art of origami to solve engineering problems of different nature. Despite being implemented at dimensions that range from the nano to the meter scale, origami‐based designs are always defined by the laws that govern their geometrical properties at any scale. It is thus not surprising to notice that the study of their applications has become of cross‐disciplinary interest. This article aims to review recent origami‐based applications in engineering, design methods and tools, with a focus on research outcomes from 2015 to 2020. First, an introduction to origami history, mathematical background and terminology is given. Origami‐based applications in engineering are reviewed largely in the following fields: biomedical engineering, architecture, robotics, space structures, biomimetic engineering, fold‐cores, and metamaterials. Second, design methods, design tools, and related manufacturing constraints are discussed. Finally, the article concludes with open questions and future challenges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review
Yu, X., Zhou, J., Liang, H., Jiang, Z., & Wu, L. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.003 · Cited by 1,140
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Kuribayashi, K., Tsuchiya, K., You, Z., Tomus, D., Umemoto, M., Ito, T., & Sasaki, M. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.12.016 · Cited by 755
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials
Filipov, E. T., Tachi, T., & Paulino, G. H. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509465112 · Cited by 673
Design, fabrication and control of origami robots
Rus, D., & Tolley, M. T. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0009-8 · Cited by 641
Programming curvature using origami tessellations
Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L. (2016) · Nature Materials · doi:10.1038/nmat4540 · Cited by 486
Zhai, Z., Wang, Y., & Jiang, H. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1720171115 · Cited by 480
Faber, J. A., Arrieta, A. F., & Studart, A. R. (2018) · Science · doi:10.1126/science.aap7753 · Cited by 434
Geometric Folding Algorithms: Linkages, Origami, Polyhedra
Demaine, E. D., & O'Rourke, J. (2007) · doi:10.1017/cbo9780511735172 · Cited by 433
Research works printed but not linked: 145
- Tateishi K., 2011, Origami5
- Uchiyama K., 1962, Origami
- Honda I., 1976, World of Origami
- Honda I., 1959, How to Make Origami
- Randlett S., 1961, The Art of Origami; Paper Folding, Traditional and Modern
- Gray A., 1983, TheOrigamian, 15, 1
- Sakoda J. M., 1969, ModernOrigami
- Harbin R., 1956, Paper Magic, 1st ed.
- Araki M., 2003, Fukkoku Ise Sadatake ”Houketsuki”
- Okamura M., 2008, Mon. Origami Mag., 398, 30
- Takagi S., 1999, Oru Kokoro, 67
- Herring A., 1999, Oru Kokoro, 84
- Lister D., 1994, Origami Science & Art
- Kraus‐Boelte M., 1882, The Kindergarten Guide: The Occupations
- Hatori K., 2011, Origami5, Ch. 1
- Lang R. J., 2004, Eng. Sci., 67, 5
- Francis K. C., 2014, Proc. of ASME 2014 Int. Design Engineering Technical Conf. Computers And Information in Engineering, V05BT08A030
- Yoshizawa A., 1954, Atarashi Origami Geijutsu
- Bern M., 1996, Proc. of the 7th Annual ACM‐SIAM Symp. on Discrete Algorithms, 175
- Hull T. C., 2003, Ars Comb., 67, 175
- Hull T., 1994, Congr. Numerantium, 100, 215
- Justin J., 1989, Proc. 1st Int. Meet. Orig. Sc. Tech., 251
- Justin J., 1986, British Origami, 118, 28
- Kawasaki T., 1989, Proc. 1st Int. Meet. Orig. Sc. Tech., 229
- Kasahara K., 1987, Origami for the Connoisseur
- Huzita H., 1989, Proc. 1st Int. Meet. Orig. Sc. Tech., 143
- Alperin R. C., 2006, Origami4, 371
- 10.4169/amer.math.monthly.118.04.307 · doi:10.4169/amer.math.monthly.118.04.307
- 10.4171/EM/179 · doi:10.4171/em/179
- 10.7710/2168-0620.1042 · doi:10.7710/2168-0620.1042
- 10.1007/s11548-017-1545-1 · doi:10.1007/s11548-017-1545-1
- Quiñones V. A. B., 2018, Adv. Biol., 2
- Mehner P. J., 2015, Origami6, 545, 10.1090/mbk/095.2/17 · doi:10.1090/mbk/095.2/17
- Diana M., 2015, Br. J. Surg., 102
- 10.1115/1.4045846 · doi:10.1115/1.4045846
- Morris E., 2010, Proc. of 3rd IEEE RAS & EMBS Int. Conf. on Biomedical Robotics and Biomechatronics, V05BT07A014
- 10.1061/(ASCE)AE.1943-5568.0000323 · doi:10.1061/(asce)ae.1943-5568.0000323
- 10.1016/j.mechrescom.2020.103503 · doi:10.1016/j.mechrescom.2020.103503
- Schultz J., 2018, Proc. of Fac. Tect. 2018 World Congrress, 1
- 10.1016/0924-4247(93)00709-D · doi:10.1016/0924-4247(93)00709-d
- 10.1109/84.485210 · doi:10.1109/84.485210
- Karras J. T., 2017, Proc. of 2017 IEEE Int. Conf. on Robotics and Automation (ICRA), 5459
- Lee D.‐Y., 2013, Proc. of the ASME 2013 Int. Design Engineering Technical Conf. and Computers and Information in Engineering, V06BT07A040
- Lee J.‐Y., 2016, Front. Rob. AI, 3, 1
- Li S., 2019, Proc. of 2019 Int. Conf. on Robotics and Automation (ICRA), 1
- Miura K., 1985, Space Sol. Power Rev., 5, 345
- 10.5194/ms-2-205-2011 · doi:10.5194/ms-2-205-2011
- D.Webb B.Hirsch C.Bradford J.Steeves D.Lisman S.Shaklan V.Bach M.Thomson inProc. SPIE2016 9912 991201. · doi:10.1117/12.2232587
- Sigel D., 2014, Proc. of ASME 2014 Int. Design Engineering Technical Conf. and Computers and Information in Engineering, V05BT08A033
- D.Webb B.Hirsch V.Bach J.Sauder S.Bradford M.Thomson presented at 3rd AIAA Spacecraft Structures Conference San Diego California USA January2016.
- Bowen L., 2016, Proc. of ASME 2016 Conf. on Smart Materials, Adaptive Structures and Intelligent Systems, V001T01A012
- Salazar R., 2017, Proc. of 2017 IEEE Aerospace Conf., 1
- S. A.Zirbel B. P.Trease M. W.Thomson R. J.Lang S. P.Magleby L. H.Howell inProc. SPIE2015 94671C. · doi:10.1117/12.2177730
- B. N.McPherson J. L.Kauffman inAIAA Scitech 2019 Forum Reston VA2019 pp. 1–18.https://doi.org/10.2514/6.2019-0480. · doi:10.2514/6.2019-0480
- Roberts R. M., 1994, LuckyScience: Accidental Discoveries From Gravity to Velcro, with Experiments
- 10.1533/9781845695088.2.137 · doi:10.1533/9781845695088.2.137
- 10.1103/PhysRevLett.100.054502 · doi:10.1103/physrevlett.100.054502
- Lakhtakia A., 2013, Engineered Biomimicry
- Kresling B., 2012, Proc. of Symp. OO – Mult. Mech. of Hier. Mat.
- 10.4028/www.scientific.net/AST.58.31 · doi:10.4028/www.scientific.net/ast.58.31
- Kobayashi H., 2000, Proc. IUTAM‐IASS Symp. on Deployable Structures, 211
- Kobayashi H., 2003, Solid Mechanics and Its Applications, 207
- Kobayashi H., 2008, Proc. of the 6th Int. Conf. on Computation of Shell and Spatial Structures
- 10.1088/1361-665X/aa9c2f · doi:10.1088/1361-665x/aa9c2f
- 10.4028/www.scientific.net/KEM.742.689 · doi:10.4028/www.scientific.net/kem.742.689
- Körner A., 2018, Proc. of IASS Symp. 2018 ‐ Creaty in Struct. Des., 1
- Bischoff M., 2017, Proc. of Int.: Architectural, Engineering, Science, 1
- Körner A., 2016, Proc. of the 36th ACADIA, 270
- Dufour L., 2016, Proc. of 2016 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems (IROS), 1576
- Rojas S., 2019, Proc. SPIE, 10965
- Ionov L., 2012, MRS Online Proc. Libr. Arch., 1403
- 10.1007/s13272-011-0014-8 · doi:10.1007/s13272-011-0014-8
- 10.1088/1757-899X/248/1/012033 · doi:10.1088/1757-899x/248/1/012033
- 10.1088/1757-899X/274/1/012035 · doi:10.1088/1757-899x/274/1/012035
- Klett Y., 2017, Proc. of 2017 IEEE Int. Conf. on Advanced Intelligent Mechatronics (AIM)
- Hartl D., 2012, Proc. of ASME 2012 Int. Mechanical Engineering Congress and Exposition, 115
- 10.1080/13588265.2018.1480471 · doi:10.1080/13588265.2018.1480471
- Grzeschik M., 2013, Proc. of ASME 2013 Int. Design Engineering Technical Conf. and Computers and Information in Engineering, V06BT07A042
- Klett Y., 2017, Proc. of ASME 2013 Int. Design Engineering Technical Conf. and Computers and Information in Engineering, V05BT08A051
- 10.1115/1.4025380 · doi:10.1115/1.4025380
- 10.1007/978-94-007-5329-7_11 · doi:10.1007/978-94-007-5329-7_11
- Gattas J. M., 2013, Proc. of ASME 2013 Int. Design Engineering Technical Conf. and Computers and Information in Engineering, V06BT07A032
- 10.1016/j.compositesb.2012.10.031 · doi:10.1016/j.compositesb.2012.10.031
- 10.1016/j.tws.2014.12.017 · doi:10.1016/j.tws.2014.12.017
- Miura K., 1972, ISAS Rep., 37, 137
- 10.1016/j.tws.2015.01.003 · doi:10.1016/j.tws.2015.01.003
- 10.1016/j.tws.2017.02.021 · doi:10.1016/j.tws.2017.02.021
- 10.1016/j.tws.2018.03.020 · doi:10.1016/j.tws.2018.03.020
- 10.1115/1.4032203 · doi:10.1115/1.4032203
- 10.1504/IJMPT.2004.004750 · doi:10.1504/ijmpt.2004.004750
- Klett Y., 2016, Proc. of ASME 2016 Int. Design Engineering Technical Conf. and Computers and Information in Engineering, V05BT07A022
- Babu A., 2016, Int. J. Appl. Sci. Eng. Res., 7, 89
- Muhs F., 2016, Proc. 17th Eur. Conf. on Composite Materials, 1
- 10.1016/j.compscitech.2019.02.019 · doi:10.1016/j.compscitech.2019.02.019
- 10.1016/j.tws.2015.12.017 · doi:10.1016/j.tws.2015.12.017
- 10.1016/j.ijsolstr.2014.10.019 · doi:10.1016/j.ijsolstr.2014.10.019
- Gattas J. M., 2015, Origami6, 421, 10.1090/mbk/095.2/05 · doi:10.1090/mbk/095.2/05
- K.Miura T.Tachi presented at Congress and Exhibition of ISIS Symmetry: Art and Science Gmuend Austria August2010 pp. 1–10.
- Mehdizadeh M., 2015, Microwave/RF Applicators and Probes
- Schenk M., 2013, Science, 110, 3276
- 10.1016/j.matdes.2019.108242 · doi:10.1016/j.matdes.2019.108242
- Morgan J., 2015, Proc. of ASME 2015 Int. Design Engineering Technical Conf. and Computers and Information in Engineering, V05BT08A053
- Ertas A., 2018, Transdisciplinary Engineering Design Process
- Cheng J., 2018, Product Lifecycle Management – Terminology and Applications
- Zhou X., 2015, Proc. R. Soc. London, Ser. A, 471
- Song K., 2017, Proc. R. Soc. London, Ser. A, 473
- He Z., 2018, Origami 7: The Proceedings from the 7th International Meeting on Origami in Science, Mathematics, and Education, 505
- Ida T., 2004, Artificial Intelligence and Symbolic Computation, 132, 10.1007/978-3-540-30210-0_12 · doi:10.1007/978-3-540-30210-0_12
- Kasem A., 2006, Proc. Annual Symp. of Japan Society for Software Science and Technology, 1
- Ida T., 2006, Origami4, Ch 25
- Wolfram S., 2003, The Mathematica Book
- J.Mitani presented at13th Int. Conf. on Geometry and Graphics Dresden Germany August2008.
- Piker D., 2013, Archit. Des., 83, 136
- Quinn G., 2016, Proc. Int. Association for Shell Spatial Structures (IASS) Symp.
- Lang R. J., 1996, Proc. of the 12th Annual Symp. on Computaional Geometry, 98
- Lang R. J, 2009, Proc. Bridges 2009: Mathematics, Music, Art, Architecture, Culture, 159
- Tachi T., 2006, Origami4
- Demaine E. D., 2017, 33rd Int. Symp. on Computational Geometry (SoCG 2017), 1
- Mitani J., 2011, Origami5
- Mitani J., 2011, Pacific Graphics Short Papers, 1
- Tachi T., 2006, Origami4
- Xi Z., 2015, 2015 IEEE Int. Conf. on Robotics and Automation (ICRA), 4155
- Tachi T., 2010, J. Geom. Graphics, 14, 203
- Tachi T., 2013, Proc. of ASME 2013 Int. Design Engineering Technical Conf. and Computers and Information in Engineering, V06BT07A025
- Schenk M., 2011, Origami5
- 10.1007/978-3-642-02115-2_16 · doi:10.1007/978-3-642-02115-2_16
- Ghassaei A., 2018, Origami7, 1151
- Liu K., 2018, Origami7, 1167
- 10.1016/j.mechrescom.2013.12.009 · doi:10.1016/j.mechrescom.2013.12.009
- Rutten D., 2013, Archit. Des., 83, 132
- Cichocka J. M., 2017, CAADFutures 2017, 151
- Makki M., 2018, Int. J. Archit. Comput., 17, 5
- Tachi T., 2011, Origami5
- D. M.Aukes R. J.Wood inProc. SPIE2015 9467 94671B. · doi:10.1117/12.2177576
- Aukes D. M., 2014, Proc. of ASME 2014 Int. Design Engineering Technical Conf. and Computers and Information in Engineering, V001T01A005
- Schulz A., 2015, Proc. of SIGGRAPH '15 SIGGRAPH 2015: Studio, 1
- Crampton E. B., 2018, Proc. ASME 2018 Int. Design Eng. Technical. Conf. and Computers and Information in Engineering Conf., V02BT03A031
- Tachi T., 2010, Proc. Int. Association for Shell Spatial Structures (IASS) Symp. 2010, 1
- Watanabe N., 2006, Origami4
- 10.1115/1.4043048 · doi:10.1115/1.4043048
- Gardiner M., 2015, Symmetry Cult. Sci., 26, 189
- De Ruysser T., 2016, Origami6, 613
- Pehrson N. A., 2016, Proc. Int. Association for Shell and Spatial Structures (IASS) Symp., 1
- Wang Y., 2017, Proc. 2017 NASA/ESA Conf. on Adaptive Hardware and Systems (AHS), 161, 10.1109/AHS.2017.8046373 · doi:10.1109/ahs.2017.8046373
- Namiki A., 2015, Proc. of 2015 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems (IROS), 5623
Cited by
2D Materials in Flexible Electronics: Recent Advances and Future Prospectives
Katiyar, A. K., Hoang, A. T., Xu, D., Hong, J., Kim, B. J., Ji, S., & Ahn, J.-H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00302 · Cited by 363
A Review on Origami Simulations: From Kinematics, To Mechanics, Toward Multiphysics
Zhu, Y., Schenk, M., & Filipov, E. T. (2022) · Applied Mechanics Reviews · doi:10.1115/1.4055031 · Cited by 144
Pang, Y., He, T., Liu, S., Zhu, X., & Lee, C. (2024) · Advanced Science · doi:10.1002/advs.202306574 · Cited by 60
Metadata
- Authors
- Meloni, M., Cai, J., Zhang, Q., Sang‐Hoon Lee, D., Li, M., Ma, R., Parashkevov, T. E., & Feng, J.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2021-05-13
- Volume
- 8
- Issue
- 13
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W3163494870
- Cited by
- 411
- References
- 98
- FWCI
- 23.24
- Type
- journal article
- Language
- en
- Open access
- gold
- Funders
- National Natural Science Foundation of China (51822805, 51878147, U1937202, U1637207)
- Natural Science Foundation of Jiangsu Province (BK20170083)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Engineering Origami: A Comprehensive Review of Recent Applications, Design Methods, and Tools. https://app.cochat.ai/papers/10.1002/advs.202000636
- The paper
- Meloni, M., Cai, J., Zhang, Q., Sang‐Hoon Lee, D., Li, M., Ma, R., Parashkevov, T. E., & Feng, J. (2021). Engineering Origami: A Comprehensive Review of Recent Applications, Design Methods, and Tools. Advanced Science. https://doi.org/10.1002/advs.202000636
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.