The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
Nanoprecipitate‐Strengthened High‐Entropy Alloys
Open accessAbstract
Multicomponent high‐entropy alloys (HEAs) can be tuned to a simple phase with some unique alloy characteristics. HEAs with body‐centered‐cubic (BCC) or hexagonal‐close‐packed (HCP) structures are proven to possess high strength and hardness but low ductility. The faced‐centered‐cubic (FCC) HEAs present considerable ductility, excellent corrosion and radiation resistance. However, their strengths are relatively low. Therefore, the strategy of strengthening the ductile FCC matrix phase is usually adopted to design HEAs with excellent performance. Among various strengthening methods, precipitation strengthening plays a dazzling role since the characteristics of multiple principal elements and slow diffusion effect of elements in HEAs provide a chance to form fine and stable nanoscale precipitates, pushing the strengths of the alloys to new high levels. This paper summarizes and review the recent progress in nanoprecipitate‐strengthened HEAs and their strengthening mechanisms. The alloy‐design strategies and control of the nanoscale precipitates in HEAs are highlighted. The future works on the related aspects are outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationA fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
High-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
Self-citationHigh tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Prediction of high-entropy stabilized solid-solution in multi-component alloys
Yang, X., & Zhang, Y. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.11.021 · Cited by 2,920
Self-citationSluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
Ma, K., Wen, H., Hu, T., Topping, T. D., Isheim, D., Seidman, D. N., Lavernia, E. J., & Schoenung, J. M. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.09.042 · Cited by 2,035
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Self-citationHe, J. Y., Liu, W. H., Wang, H., Wu, Y., Liu, X. J., Nieh, T. G., & Lu, Z. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.09.037 · Cited by 1,529
Wang, W.-R., Wang, W.-L., Wang, S.-C., Tsai, Y.-C., Lai, C.-H., & Yeh, J.-W. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.03.005 · Cited by 1,517
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Jiang, S., Wang, H., Wu, Y., Liu, X., Chen, H., Yao, M., Gault, B., Ponge, D., Raabe, D., Hirata, A., et al. (2017) · Nature · doi:10.1038/nature22032 · Cited by 1,441
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Short-range order and its impact on the CrCoNi medium-entropy alloy
Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,279
Tensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Making strong nanomaterials ductile with gradients
Lu, K. (2014) · Science · doi:10.1126/science.1255940 · Cited by 1,173
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins
Wei, Y., Li, Y., Zhu, L., Liu, Y., Lei, X., Wang, G., Wu, Y., Mi, Z., Liu, J., Wang, H., et al. (2014) · Nature Communications · doi:10.1038/ncomms4580 · Cited by 1,109
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
Liu, W. H., Lu, Z. P., He, J. Y., Luan, J. H., Wang, Z. J., Liu, B., Liu, Y., Chen, M. W., & Liu, C. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.063 · Cited by 1,064
Self-citationPrecipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys
Seidman, D. N., Marquis, E. A., & Dunand, D. C. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00201-x · Cited by 936
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Mechanical properties of copper/bronze laminates: Role of interfaces
Ma, X., Huang, C., Moering, J., Ruppert, M., Höppel, H. W., Göken, M., Narayan, J., & Zhu, Y. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.023 · Cited by 871
Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
Ding, J., Yu, Q., Asta, M., & Ritchie, R. O. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1808660115 · Cited by 845
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Kim, S.-H., Kim, H., & Kim, N. J. (2015) · Nature · doi:10.1038/nature14144 · Cited by 830
Li, Q.-J., Sheng, H., & Ma, E. (2019) · Nature Communications · doi:10.1038/s41467-019-11464-7 · Cited by 795
Luo, H., Li, Z., Mingers, A. M., & Raabe, D. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.02.031 · Cited by 792
A high-specific-strength and corrosion-resistant magnesium alloy
Xu, W., Birbilis, N., Sha, G., Wang, Y., Daniels, J. E., Xiao, Y., & Ferry, M. (2015) · Nature Materials · doi:10.1038/nmat4435 · Cited by 778
Yeh, J.-W., Chang, S.-Y., Hong, Y.-D., Chen, S.-K., & Lin, S.-J. (2007) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.01.003 · Cited by 742
Outstanding radiation resistance of tungsten-based high-entropy alloys
El-Atwani, O., Li, N., Li, M., Devaraj, A., Baldwin, J. K. S., Schneider, M. M., Sobieraj, D., Wróbel, J. S., Nguyen-Manh, D., Maloy, S. A., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav2002 · Cited by 658
Multicomponent and High Entropy Alloys
Cantor, B. (2014) · Entropy · doi:10.3390/e16094749 · Cited by 656
On the elemental effect of AlCoCrCuFeNi high-entropy alloy system
Tung, C.-C., Yeh, J.-W., Shun, T.-T., Chen, S.-K., Huang, Y.-S., & Chen, H.-C. (2007) · Materials Letters · doi:10.1016/j.matlet.2006.03.140 · Cited by 629
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Self-citationFan, L., Yang, T., Zhao, Y., Luan, J., Zhou, G., Wang, H., Jiao, Z., & Liu, C.-T. (2020) · Nature Communications · doi:10.1038/s41467-020-20109-z · Cited by 598
Self-citationDu, X. H., Li, W. P., Chang, H. T., Yang, T., Duan, G. S., Wu, B. L., Huang, J. C., Chen, F. R., Liu, C. T., Chuang, W. S., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16085-z · Cited by 558
Self-citationMa, D., Grabowski, B., Körmann, F., Neugebauer, J., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.050 · Cited by 556
Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy
Ma, S. G., & Zhang, Y. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.10.110 · Cited by 538
Self-citationMicrostructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy
Bhattacharjee, P. P., Sathiaraj, G. D., Zaid, M., Gatti, J. R., Lee, C., Tsai, C.-W., & Yeh, J.-W. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.10.237 · Cited by 530
Liu, W. H., He, J. Y., Huang, H. L., Wang, H., Lu, Z. P., & Liu, C. T. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.01.004 · Cited by 513
Self-citationFu, Z., Chen, W., Wen, H., Zhang, D., Chen, Z., Zheng, B., Zhou, Y., & Lavernia, E. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.050 · Cited by 501
Ma, Y., Wang, Q., Jiang, B. B., Li, C. L., Hao, J. M., Li, X. N., Dong, C., & Nieh, T. G. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.050 · Cited by 410
A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength
Fu, Z., Jiang, L., Wardini, J. L., MacDonald, B. E., Wen, H., Xiong, W., Zhang, D., Zhou, Y., Rupert, T. J., Chen, W., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat8712 · Cited by 406
A low-cost hierarchical nanostructured beta-titanium alloy with high strength
Devaraj, A., Joshi, V. V., Srivastava, A., Manandhar, S., Moxson, V., Duz, V. A., & Lavender, C. (2016) · Nature Communications · doi:10.1038/ncomms11176 · Cited by 364
Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys
Wu, Z., Parish, C. M., & Bei, H. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.224 · Cited by 358
Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures
He, J. Y., Zhu, C., Zhou, D. Q., Liu, W. H., Nieh, T. G., & Lu, Z. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.06.015 · Cited by 358
Ming, K., Bi, X., & Wang, J. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.10.005 · Cited by 330
Design of D022 superlattice with superior strengthening effect in high entropy alloys
He, F., Chen, D., Han, B., Wu, Q., Wang, Z., Wei, S., Wei, D., Wang, J., Liu, C. T., & Kai, J.-J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.048 · Cited by 322
Self-citationHigh-throughput design of high-performance lightweight high-entropy alloys
Feng, R., Zhang, C., Gao, M. C., Pei, Z., Zhang, F., Chen, Y., Ma, D., An, K., Poplawsky, J. D., Ouyang, L., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-24523-9 · Cited by 319
Self-citationLattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy
Lee, C., Chou, Y., Kim, G., Gao, M. C., An, K., Brechtl, J., Zhang, C., Chen, W., Poplawsky, J. D., Song, G., et al. (2020) · Advanced Materials · doi:10.1002/adma.202004029 · Cited by 318
Self-citationDense high-entropy boride ceramics with ultra-high hardness
Zhang, Y., Guo, W., Jiang, Z.-B., Zhu, Q., Sun, S., You, Y., Plucknett, K. P., & Lin, H. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.01.021 · Cited by 317
Self-citationZhao, Y. L., Yang, T., Li, Y. R., Fan, L., Han, B., Jiao, Z. B., Chen, D., Liu, C. T., & Kai, J. J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.02.028 · Cited by 317
Self-citationOstwald ripening in multicomponent alloys
Philippe, T., & Voorhees, P. W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.03.049 · Cited by 314
Feuerbacher, M., Heidelmann, M., & Thomas, C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.951493 · Cited by 308
Yang, T., Zhao, Y. L., Fan, L., Wei, J., Luan, J. H., Liu, W. H., Wang, C., Jiao, Z. B., Kai, J. J., & Liu, C. T. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.02.059 · Cited by 292
Self-citationDesign of Light-Weight High-Entropy Alloys
Feng, R., Gao, M., Lee, C., Mathes, M., Zuo, T., Chen, S., Hawk, J., Zhang, Y., & Liaw, P. (2016) · Entropy · doi:10.3390/e18090333 · Cited by 290
Self-citationZhou, Y. J., Zhang, Y., Wang, Y. L., & Chen, G. L. (2007) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.11.049 · Cited by 279
Self-citationPhase stability of non-equiatomic CoCrFeMnNi high entropy alloys
Ma, D., Yao, M., Pradeep, K. G., Tasan, C. C., Springer, H., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.030 · Cited by 262
Irradiation damage in (Zr0.25Ta0.25Nb0.25Ti0.25)C high-entropy carbide ceramics
Wang, F., Yan, X., Wang, T., Wu, Y., Shao, L., Nastasi, M., Lu, Y., & Cui, B. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.06.011 · Cited by 253
Kuo, Y.-L., Horikawa, S., & Kakehi, K. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.10.035 · Cited by 250
Chen, L. B., Wei, R., Tang, K., Zhang, J., Jiang, F., He, L., & Sun, J. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.01.045 · Cited by 249
High-Entropy Alloys in Hexagonal Close-Packed Structure
Gao, M. C., Zhang, B., Guo, S. M., Qiao, J. W., & Hawk, J. A. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3091-1 · Cited by 221
Dąbrowa, J., Kucza, W., Cieślak, G., Kulik, T., Danielewski, M., & Yeh, J.-W. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.03.046 · Cited by 208
Effect of coherent L12 nanoprecipitates on the tensile behavior of a fcc-based high-entropy alloy
Wang, Z. G., Zhou, W., Fu, L. M., Wang, J. F., Luo, R. C., Han, X. C., Chen, B., & Wang, X. D. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.04.111 · Cited by 208
Self-citationNanoscale precipitates as sustainable dislocation sources for enhanced ductility and high strength
Peng, S., Wei, Y., & Gao, H. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1914615117 · Cited by 201
Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures
Ming, K., Bi, X., & Wang, J. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2018.10.005 · Cited by 200
Irradiation Behavior in High Entropy Alloys
Xia, S.-Q., Wang, Z., Yang, T.-F., & Zhang, Y. (2015) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(15)30084-4 · Cited by 198
Self-citationWang, Q., Ma, Y., Jiang, B., Li, X., Shi, Y., Dong, C., & Liaw, P. K. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.04.014 · Cited by 193
Self-citationShort communication: ‘Low activation, refractory, high entropy alloys for nuclear applications’
Kareer, A., Waite, J. C., Li, B., Couet, A., Armstrong, D. E. J., & Wilkinson, A. J. (2019) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2019.151744 · Cited by 187
Novel Fe36Mn21Cr18Ni15Al10 high entropy alloy with bcc/B2 dual-phase structure
Shaysultanov, D. G., Salishchev, G. A., Ivanisenko, Y. V., Zherebtsov, S. V., Tikhonovsky, M. A., & Stepanov, N. D. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.02.211 · Cited by 177
Jiang, L., Lu, Y., Dong, Y., Wang, T., Cao, Z., & Li, T. (2014) · Intermetallics · doi:10.1016/j.intermet.2013.08.016 · Cited by 167
Ko, J. Y., & Hong, S. I. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.348 · Cited by 167
Strengthening of a CrMnFeCoNi high-entropy alloy by carbide precipitation
Gao, N., Lü, D., Zhao, Y., Liu, X., Liu, G., Wu, Y., Liu, G., Fan, Z. T., Lü, Z., & George, E. P. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.04.121 · Cited by 151
Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy
Peng, J. W., Li, Z., Fu, L., Ji, X., Pang, Z., & Shan, A. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.06.204 · Cited by 146
Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy
Moravčík, I., Horník, V., Minárik, P., Li, L., Dlouhý, I., Janovská, M., Raabe, D., & Li, Z. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139242 · Cited by 126
Irradiation effects in high entropy alloys and 316H stainless steel at 300 °C
Chen, W., Liu, X., Chen, Y., Yeh, J., Tseng, K.-K., & Natesan, K. (2018) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2018.08.031 · Cited by 94
Ma, S. G., Qiao, J., Wang, Z., Yang, H., & Zhang, Y. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.09.092 · Cited by 85
Self-citationFan, L., Yang, T., Luan, J., & Jiao, Z. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.154903 · Cited by 82
Peng, C., Zhao, Y., Xu, X., Wang, S., Sun, Y., & Hou, H. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138681 · Cited by 79
Consideration of kinetics on intermetallics formation in solid-solution high entropy alloys
Chou, T. H., Huang, J. C., Yang, C.-H., Lin, S., & Nieh, T. G. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.05.015 · Cited by 71
Jin, X., Liang, Y., Zhang, L., Bi, J., Zhou, Y., & Li, B. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.12.097 · Cited by 66
Irradiation induced creep in nanocrystalline high entropy alloys
Jawaharram, G. S., Barr, C. M., Monterrosa, A. M., Hattar, K., Averback, R. S., & Dillon, S. J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.10.022 · Cited by 64
Sunkari, U., Reddy, S. R., Rathod, B. D. S., Kumar, S. S. S., Saha, R., Chatterjee, S., & Bhattacharjee, P. P. (2020) · Scientific Reports · doi:10.1038/s41598-020-63038-z · Cited by 63
High temperature deformation behavior of carbon-containing FeCoCrNiMn high entropy alloy
Li, J., Gao, B., Tang, S., Liu, B., Liu, Y., Wang, Y., & Wang, J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.332 · Cited by 56
Mu, S., Pei, Z., Liu, X., & Stocks, G. M. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.300 · Cited by 53
The Gaussian distribution of lattice size and atomic level heterogeneity in high entropy alloys
Liu, S., & Wei, Y. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.10.007 · Cited by 43
Cryogenic behaviour of the Al5Ti5Co35Ni35Fe20 multi-principal component alloy
Górecki, K. M., Bala, P., Bednarczyk, W., & Kawałko, J. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.01.001 · Cited by 43
High-temperature age-hardening of a novel cost-effective Fe45Ni25Cr25Mo5 high entropy alloy
Yin, Y. J., Chen, Z., Mo, N., Kent, D., Candella, A. R., Koey, K. E., Tan, Q., Bermingham, M. J., & Zhang, M. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139580 · Cited by 38
Interstitial carbide synergistically strengthening high-entropy alloy CoCrFeNiV0.5C
Ma, Y., Liu, X., Dong, W., Li, R., Zhang, Y., Lu, Y., Yu, P., & Li, G. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139802 · Cited by 35
Self-citation
Cited by
Machine learning for high-entropy alloys: Progress, challenges and opportunities
Liu, X., Zhang, J., & Pei, Z. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101018 · Cited by 397
Shearing brittle intermetallics enhances cryogenic strength and ductility of steels
Wang, F., Song, M., Elkot, M. N., Yao, N., Sun, B., Song, M., Wang, Z., & Raabe, D. (2024) · Science · doi:10.1126/science.ado2919 · Cited by 253
Metadata
- Authors
- Liu, L., Zhang, Y., Han, J., Wang, X., Jiang, W., Liu, C., Zhang, Z., & Liaw, P. K.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2021-10-22
- Volume
- 8
- Issue
- 23
- Pages
- e2100870-e2100870
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W3207190181
- Cited by
- 393
- References
- 96
- FWCI
- 20.70
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.