The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Metallic Nanoparticle Inks for 3D Printing of Electronics
Abstract
The three‐dimensional (3D) printed electronics additive manufacturing industry sector has grown substantially in the past few years, and there is increasing demand for different types of metallic nanoparticle inks in electronics printing for various applications. Metallic nanoparticle inks are commonly used for fabricating conductive tracks and patterns due to their relatively high electrical conductivity as compared to other types of inks, and they can be further categorized into single‐element metallic nanoparticle inks, alloy metallic nanoparticle inks, metallic oxide nanoparticle inks, and core–shell bimetallic nanoparticle (BNP) inks. It is critical to gain a deep understanding of the metallic nanoparticle inks used in 3D printed electronics as the material properties of these inks can directly affect the final electrical and mechanical properties of the printed patterns. This review presents an overview of the available metallic nanoparticle inks used for 3D printing of electronics, and critically reviews the strengths and weaknesses of each type of ink. Finally, the challenges of metallic nanoparticle inks in 3D printed electronics are also discussed along with the future outlook for 3D printed electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Ghosh Chaudhuri, R., & Paria, S. (2012) · Chemical Reviews · doi:10.1021/cr100449n · Cited by 3,614
Size effect on the melting temperature of gold particles
Buffat, P., & Borel, J.-P. (1976) · Physical Review A · doi:10.1103/physreva.13.2287 · Cited by 3,362
Nanoparticles in Photodynamic Therapy
Lucky, S. S., Soo, K. C., & Zhang, Y. (2015) · Chemical Reviews · doi:10.1021/cr5004198 · Cited by 2,980
Size matters: why nanomaterials are different
Roduner, E. (2006) · Chemical Society Reviews · doi:10.1039/b502142c · Cited by 2,317
X. The Bakerian Lecture. —Experimental relations of gold (and other metals) to light
Faraday, M. (1857) · Philosophical Transactions of the Royal Society of London · doi:10.1098/rstl.1857.0011 · Cited by 2,123
A wearable and highly sensitive pressure sensor with ultrathin gold nanowires
Gong, S., Schwalb, W., Wang, Y., Chen, Y., Tang, Y., Si, J., Shirinzadeh, B., & Cheng, W. (2014) · Nature Communications · doi:10.1038/ncomms4132 · Cited by 2,064
Surface plasmon resonance in gold nanoparticles: a review
Amendola, V., Pilot, R., Frasconi, M., Maragò, O. M., & Iatì, M. A. (2017) · Journal of Physics: Condensed Matter · doi:10.1088/1361-648x/aa60f3 · Cited by 1,905
Au nanoparticles target cancer
Jain, P. K., El-Sayed, I. H., & El-Sayed, M. A. (2007) · Nano Today · doi:10.1016/s1748-0132(07)70016-6 · Cited by 1,157
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Physics for Scientists and Engineers with Modern Physics
Serway, R. A., & Kirkpatrick, L. D. (1988) · The Physics Teacher · doi:10.1119/1.2342517 · Cited by 902
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
The plasmon band in noble metal nanoparticles: an introduction to theory and applications
Moores, A., & Goettmann, F. (2006) · New Journal of Chemistry · doi:10.1039/b604038c · Cited by 665
Size Matters: Gold Nanoparticles in Targeted Cancer Drug Delivery
Dreaden, E. C., Austin, L. A., Mackey, M. A., & El-Sayed, M. A. (2012) · Therapeutic Delivery · doi:10.4155/tde.12.21 · Cited by 651
Inkjet printing of nanosized silver colloids
Lee, H.-H., Chou, K.-S., & Huang, K.-C. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/074 · Cited by 586
Direct writing of copper conductive patterns by ink-jet printing
Park, B. K., Kim, D., Jeong, S., Moon, J., & Kim, J. S. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2006.11.142 · Cited by 555
Zaleska-Medynska, A., Marchelek, M., Diak, M., & Grabowska, E. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.12.008 · Cited by 540
Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability
Magdassi, S., Grouchko, M., & Kamyshny, A. (2010) · Materials · doi:10.3390/ma3094626 · Cited by 429
Chua, C. K., & Leong, K. F. (2017) · WORLD SCIENTIFIC eBooks · doi:10.1142/10200 · Cited by 294
Self-citationInkjet Printing of Silver Nanowire Networks
Finn, D. J., Lotya, M., & Coleman, J. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01875 · Cited by 279
Wünscher, S., Abbel, R., Perelaer, J., & Schubert, U. S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01820f · Cited by 278
On the application potential of gold nanoparticles in nanoelectronics and biomedicine
Homberger, M., & Simon, U. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2009.0275 · Cited by 267
Inkjet printed electronics using copper nanoparticle ink
Kang, J. S., Kim, H. S., Ryu, J., Thomas Hahn, H., Jang, S., & Joung, J. W. (2010) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-009-0049-3 · Cited by 208
A review: additive manufacturing for active electronic components
Saengchairat, N., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1253181 · Cited by 195
Self-citationAgarwala, S., Goh, G. L., Dinh Le, T.-S., An, J., Peh, Z. K., Yeong, W. Y., & Kim, Y.-J. (2019) · ACS Sensors · doi:10.1021/acssensors.8b01293 · Cited by 186
Self-citationA review of printed passive electronic components through fully additive manufacturing methods
Tan, H., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1217586 · Cited by 175
Self-citationFully printed electronics on flexible substrates: High gain amplifiers and DAC
Chang, J., Zhang, X., Ge, T., & Zhou, J. (2014) · Organic Electronics · doi:10.1016/j.orgel.2013.12.027 · Cited by 174
Niittynen, J., Sowade, E., Kang, H., Baumann, R. R., & Mäntysalo, M. (2015) · Scientific Reports · doi:10.1038/srep08832 · Cited by 170
Cu-Ag core–shell nanoparticles with enhanced oxidation stability for printed electronics
Lee, C., Kim, N. R., Koo, J., Lee, Y. J., & Lee, H. M. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/45/455601 · Cited by 162
Directed and On‐Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics
Goh, G. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201801318 · Cited by 155
Engineering noble metal nanomaterials for environmental applications
Li, J., Zhao, T., Chen, T., Liu, Y., Ong, C. N., & Xie, J. (2015) · Nanoscale · doi:10.1039/c5nr00857c · Cited by 145
Highly Transparent and Conductive Films of Densely Aligned Ultrathin Au Nanowire Monolayers
Sánchez‐Iglesias, A., Rivas‐Murias, B., Grzelczak, M., Pérez‐Juste, J., Liz‐Marzán, L. M., Rivadulla, F., & Correa‐Duarte, M. A. (2012) · Nano Letters · doi:10.1021/nl3021522 · Cited by 126
Mechanics of stretchable electronics
Song, J. (2015) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2015.01.004 · Cited by 112
El-Nour, K. M. A., Salam, E. T. A., Soliman, H. M., & Orabi, A. S. (2017) · Nanoscale Research Letters · doi:10.1186/s11671-017-2014-z · Cited by 110
Inkjet-printing of indium tin oxide (ITO) films for transparent conducting electrodes
Hwang, M.-S., Jeong, B.-Y., Moon, J., et al. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.05.053 · Cited by 109
Sintering mechanism of the Cu–Ag core–shell nanoparticle paste at low temperature in ambient air
Tian, Y., Jiang, Z., Wang, C., Ding, S., Wen, J., Liu, Z., & Wang, C. (2016) · RSC Advances · doi:10.1039/c6ra16474a · Cited by 95
3D Inkjet Printing of Electronics Using UV Conversion
Saleh, E., Zhang, F., He, Y., Vaithilingam, J., Fernandez, J. L., Wildman, R. D., Ashcroft, I., Hague, R., Dickens, P., & Tuck, C. J. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700134 · Cited by 85
Production of Oxidation-Resistant Cu-Based Nanoparticles by Wire Explosion
Kawamura, G., Alvarez, S., Stewart, I. E., Catenacci, M. J., Chen, Z., & Ha, Y. (2015) · Scientific Reports · doi:10.1038/srep18333 · Cited by 68
Agarwala, S., Goh, G. L., & Yeong, W. Y. (2018) · IEEE Access · doi:10.1109/access.2018.2876647 · Cited by 54
Vaseem, M., Ghaffar, F. A., Farooqui, M. F., & Shamim, A. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700242 · Cited by 49
A novel method to produce Pd nanoparticle ink for ink-jet printing technology
Tseng, C., Chang, C.-P., Sung, Y., Chen, Y.-C., & Ger, M.-D. (2009) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2009.02.026 · Cited by 40
FORMULATION OF SCREEN PRINTABLE COBALT NANOPARTICLE INK FOR HIGH FREQUENCY APPLICATIONS
Nelo, M., Sowpati, A. K., Palukuru, V. K., Juuti, J., & Jantunen, H. M. (2010) · Electromagnetic waves · doi:10.2528/pier10102101 · Cited by 26
Tseng, C., Lin, Y., Liu, T.-Y., Nian, Y.-Y., Wang, M.-W., & Ger, M.-D. (2013) · Thin Solid Films · doi:10.1016/j.tsf.2013.03.043 · Cited by 6
Research works printed but not linked: 92
- 10.1039/C6NR09610G · doi:10.1039/c6nr09610g
- Tan H. W., 2016, 2nd Int. Conf. on Progress in Additive Manufacturing
- Tan H. W., 2016, IJIE 2016: The 18th Int. Conf. on Industrial Engineering
- 10.1016/j.orgel.2010.04.025 · doi:10.1016/j.orgel.2010.04.025
- 10.1109/JDT.2010.2065214 · doi:10.1109/jdt.2010.2065214
- Kawahara Y., 2013, 2013 ACM Int. Joint Conf. on Pervasive and Ubiquitous Computing
- Bonadiman R., 2010, Electronic System‐Integration Technology Conference (ESTC)
- 10.1016/j.tsf.2011.04.188 · doi:10.1016/j.tsf.2011.04.188
- 10.1016/j.orgel.2015.07.058 · doi:10.1016/j.orgel.2015.07.058
- Tan H. W., 2018, 3rd Int. Conf. on Progress in Additive Manufacturing (Pro‐AM 2018)
- 10.1557/jmr.2012.419 · doi:10.1557/jmr.2012.419
- 10.1016/0040-6090(86)90422-0 · doi:10.1016/0040-6090(86)90422-0
- 10.1002/adma.201104417 · doi:10.1002/adma.201104417
- Rajan K., 2016, Nanotechnol., Sci. Appl., 9, 1
- Reder J., 2012, Inkjet Technology for Digital Fabrication
- 10.1038/srep21398 · doi:10.1038/srep21398
- 10.1021/acsami.5b12516 · doi:10.1021/acsami.5b12516
- 10.1007/s10404-014-1496-6 · doi:10.1007/s10404-014-1496-6
- 10.1080/00405000701547748 · doi:10.1080/00405000701547748
- 10.1016/j.cep.2012.07.007 · doi:10.1016/j.cep.2012.07.007
- 10.1039/c2jm35586h · doi:10.1039/c2jm35586h
- 10.1038/srep34470 · DOI
- 10.1364/OE.19.021563 · doi:10.1364/oe.19.021563
- 10.1007/s11051-011-0306-2 · doi:10.1007/s11051-011-0306-2
- 10.1021/am400606y · doi:10.1021/am400606y
- 10.1016/j.mee.2015.10.006 · doi:10.1016/j.mee.2015.10.006
- 10.1016/j.sna.2017.07.025 · doi:10.1016/j.sna.2017.07.025
- 10.1080/17452759.2016.1229802 · doi:10.1080/17452759.2016.1229802
- 10.1021/acsami.6b14787 · doi:10.1021/acsami.6b14787
- 10.1109/TCAPT.2008.2010505 · doi:10.1109/tcapt.2008.2010505
- 10.1088/0960-1317/21/12/125023 · doi:10.1088/0960-1317/21/12/125023
- 10.1088/0957-4484/22/39/395705 · doi:10.1088/0957-4484/22/39/395705
- 10.1016/j.jcis.2015.07.045 · doi:10.1016/j.jcis.2015.07.045
- 10.1016/j.colsurfa.2011.03.034 · doi:10.1016/j.colsurfa.2011.03.034
- 10.1007/s11664-010-1384-0 · doi:10.1007/s11664-010-1384-0
- 10.1021/am404226e · doi:10.1021/am404226e
- 10.1007/s11664-011-1711-0 · doi:10.1007/s11664-011-1711-0
- 10.1016/j.tsf.2014.09.035 · doi:10.1016/j.tsf.2014.09.035
- 10.1088/0957-4484/22/39/395705 · doi:10.1088/0957-4484/22/39/395705
- 10.1021/la802182y · doi:10.1021/la802182y
- 10.1016/j.matchemphys.2014.02.045 · doi:10.1016/j.matchemphys.2014.02.045
- 10.1088/0957-4484/23/48/485205 · doi:10.1088/0957-4484/23/48/485205
- Sipilä E., 2015, 9th European Conf. on Antennas and Propagation (EuCAP)
- 10.1088/1361-6528/aa6cda · doi:10.1088/1361-6528/aa6cda
- 10.1088/0957-4484/27/3/035203 · doi:10.1088/0957-4484/27/3/035203
- Kela L., 2014, Int. Congress of Metallurgy and Materials
- 10.1049/el.2014.2194 · doi:10.1049/el.2014.2194
- Raghavendra R., 2014, Int. J. Pharm. Pharm. Sci., 2, 4
- Bachmann B., 2017, TechConnect Briefs, 4, 141
- 10.1016/j.mee.2008.12.058 · doi:10.1016/j.mee.2008.12.058
- 10.1166/jnn.2014.7208 · doi:10.1166/jnn.2014.7208
- 10.1002/adma.200400690 · doi:10.1002/adma.200400690
- 10.1021/ac3003243 · doi:10.1021/ac3003243
- 10.1039/C6SC00142D · doi:10.1039/c6sc00142d
- 10.1021/am303268k · doi:10.1021/am303268k
- 10.1109/JEDS.2017.2764498 · doi:10.1109/jeds.2017.2764498
- Platt H. A. S., 2012, 38th IEEE Photovoltaic Specialists Conf.
- 10.1007/s11664-015-4072-2 · doi:10.1007/s11664-015-4072-2
- 10.1049/iet-map.2012.0554 · doi:10.1049/iet-map.2012.0554
- 10.1007/s10853-005-3659-z · doi:10.1007/s10853-005-3659-z
- 10.1016/j.tsf.2013.11.075 · doi:10.1016/j.tsf.2013.11.075
- Segal‐Scharia M., 2019, Nano Dimension Announces New Collaboration with Tel Aviv University Enabling 3D Printing of Sensors Using Nickel Nano‐Particles
- Pasquarelli R., 2008, J. Undergrad. Chem. Res., 8, 91
- Liu P., 2015, US Patent US8940197B2
- 10.1002/adfm.201600657 · doi:10.1002/adfm.201600657
- 10.1016/j.jtice.2015.10.024 · doi:10.1016/j.jtice.2015.10.024
- 10.1016/j.jtice.2017.08.018 · doi:10.1016/j.jtice.2017.08.018
- Vasiliev A. A., 2018, Eurosensors 2018 Conf.
- 10.5012/bkcs.2013.34.3.831 · doi:10.5012/bkcs.2013.34.3.831
- 10.1088/0957-4484/22/22/225701 · doi:10.1088/0957-4484/22/22/225701
- Klassert A., 2007, Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater
- 10.1016/j.orgel.2014.05.014 · doi:10.1016/j.orgel.2014.05.014
- 10.1021/acsami.8b00551 · doi:10.1021/acsami.8b00551
- 10.1021/jp3005647 · doi:10.1021/jp3005647
- 10.2320/matertrans.MAW201017 · doi:10.2320/matertrans.maw201017
- 10.1080/15421401003609848 · doi:10.1080/15421401003609848
- 10.1016/j.matlet.2011.07.046 · doi:10.1016/j.matlet.2011.07.046
- 10.1088/2058-8585/aaa166 · doi:10.1088/2058-8585/aaa166
- 10.1016/j.tsf.2013.01.032 · doi:10.1016/j.tsf.2013.01.032
- 10.1007/s11051-012-0782-z · doi:10.1007/s11051-012-0782-z
- Ouyang Q., 2016, Semiconductor Technology Int. Conf. (CSTIC)
- Sharma G., 2017, J. King Saud Univ. Sci.
- 10.1016/j.colsurfa.2016.08.026 · doi:10.1016/j.colsurfa.2016.08.026
- 10.1039/b821327e · doi:10.1039/b821327e
- 10.12974/2311-8792.2017.05.1 · doi:10.12974/2311-8792.2017.05.1
- 10.1021/acsami.7b14572 · doi:10.1021/acsami.7b14572
- 10.1038/s41598-018-28684-4 · doi:10.1038/s41598-018-28684-4
- Weibing G., 2016, 6th Electronic System‐Integration Technology Conf. (ESTC)
- 10.1063/1.4939095 · doi:10.1063/1.4939095
- 10.1557/jmr.2013.73 · doi:10.1557/jmr.2013.73
- Alastalo A. T., 2011, MRS Proc., 1113, 2
- 10.1021/la0509044 · doi:10.1021/la0509044
Cited by
A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Self-citationFlexible Electronics: Status, Challenges and Opportunities
Corzo, D., Tostado-Blázquez, G., & Baran, D. (2020) · Frontiers in Electronics · doi:10.3389/felec.2020.594003 · Cited by 391
Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications.
Lawson, S., Li, X., Thakkar, H., Rownaghi, A. A., & Rezaei, F. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00060 · Cited by 341
3D printed electronics: Processes, materials and future trends
Tan, H. W., Choong, Y. Y. C., Kuo, C. N., Low, H. Y., & Chua, C. K. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100945 · Cited by 327
Self-citation
Metadata
- Authors
- Tan, H. W., An, J., Chua, C. K., & Tran, T.
- Venue
- Advanced Electronic Materials
- Publisher
- Wiley
- Published
- 2019-03-28
- Volume
- 5
- Issue
- 5
- ISSN
- 2199-160X (ISSN-L)
- OpenAlex
- W2929613351
- Cited by
- 286
- References
- 43
- FWCI
- 10.57
- Type
- journal article
- Language
- en
- Open access
- closed
- Funders
- National Research Foundation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.