The DOI matches its Crossref record; 90 of the 90 references it cites were found in a registry or an index.
In Situ TEM Experiments of Electrochemical Lithiation and Delithiation of Individual Nanostructures
Abstract
Understanding the microscopic mechanisms of electrochemical reaction and material degradation is crucial for the rational design of high‐performance lithium ion batteries (LIBs). A novel nanobattery assembly and testing platform inside a transmission electron microscope (TEM) has been designed, which allows a direct study of the structural evolution of individual nanowire or nanoparticle electrodes with near‐atomic resolution in real time. In this review, recent progresses in the study of several important anode materials are summarized. The consistency between in situ and ex situ results is shown, thereby validating the new in situ testing paradigm. Comparisons between a variety of nanostructures lead to the conclusion that electrochemical reaction and mechanical degradation are material specific, size dependent, and geometrically and compositionally sensitive. For example, a highly anisotropic lithiation in Si is observed, in contrast to the nearly isotropic response in Ge. The Ge nanowires can develop a spongy network, a unique mechanism for mitigating the large volume changes during cycling. The Si nanoparticles show a critical size of ∼150 nm below which fracture is averted during lithiation, and above which surface cracking, rather than central cracking, is observed. In carbonaceous nanomaterials, the lithiated multi‐walled carbon nanotubes (MWCNTs) are drastically embrittled, while few‐layer graphene nanoribbons remain mechanically robust after lithiation. This distinct contrast manifests a strong ‘geometrical embrittlement’ effect as compared to a relatively weak ‘chemical embrittlement’ effect. In oxide nanowires, discrete cracks in ZnO nanowires are generated near the lithiation reaction front, leading to leapfrog cracking, while a mobile dislocation cloud at the reaction front is observed in SnO 2 nanowires. This contrast is corroborated by ab initio calculations that indicate a strong chemical embrittlement of ZnO, but not of SnO 2, after a small amount of lithium insertion. In metallic nanowires such as Al, delithiation causes pulverization, and the product nanoparticles are held in place by the surface Li‐Al‐O glass tube, suggesting possible strategies for improving electrode cyclability by coatings. In addition, a new in situ chemical lithiation method is introduced for fast screening of battery materials by conventional TEM. Evidently, in situ nanobattery experiments inside TEM are a powerful approach for advancing the fundamental understanding of electrochemical reactions and materials degradation and therefore pave the way toward rational design of high‐performance LIBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells
Kasavajjula, U., Wang, C., & Appleby, A. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.084 · Cited by 2,491
Size-Dependent Fracture of Silicon Nanoparticles During Lithiation
Liu, X. H., Zhong, L., Huang, S., Mao, S. X., Zhu, T., & Huang, J. Y. (2012) · ACS Nano · doi:10.1021/nn204476h · Cited by 2,376
Self-citationMetal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
High-performance lithium-ion anodes using a hierarchical bottom-up approach
Magasinski, A., Dixon, P., Hertzberg, B., Kvit, A., Ayala, J., & Yushin, G. (2010) · Nature Materials · doi:10.1038/nmat2725 · Cited by 2,044
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
Graphene based new energy materials
Sun, Y., Wu, Q., & Shi, G. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00683a · Cited by 1,928
Cited by
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
McDowell, M. T., Lee, S. W., Nix, W. D., & Cui, Y. (2013) · Advanced Materials · doi:10.1002/adma.201301795 · Cited by 1,670
In Situ TEM of Two-Phase Lithiation of Amorphous Silicon Nanospheres
McDowell, M. T., Lee, S. W., Harris, J. T., Korgel, B. A., Wang, C., Nix, W. D., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl3044508 · Cited by 869
Metal Sulfide Hollow Nanostructures for Electrochemical Energy Storage
Yu, X., Yu, L., & Lou, X. W. (. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501333 · Cited by 760
Nitta, N., & Yushin, G. (2014) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201300231 · Cited by 724
Nanowire Electrodes for Electrochemical Energy Storage Devices
Mai, L., Tian, X., Xu, X., Chang, L., & Xu, L. (2014) · Chemical Reviews · doi:10.1021/cr500177a · Cited by 700
In situ atomic-scale imaging of electrochemical lithiation in silicon
Liu, X. H., Wang, J. W., Huang, S., Fan, F., Huang, X., Liu, Y., Krylyuk, S., Yoo, J., Dayeh, S. A., Davydov, A. V., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.170 · Cited by 657
Self-citationDeveloping High‐Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress
Li, S., Jiang, M., Xie, Y., Xu, H., Jia, J., & Li, J. (2018) · Advanced Materials · doi:10.1002/adma.201706375 · Cited by 535
Self-citationJin, Y., Li, S., Kushima, A., Zheng, X., Sun, Y., Xie, J., Sun, J., Xue, W., Zhou, G., Wu, J., et al. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02685k · Cited by 527
Self-citationKushima, A., So, K. P., Su, C., Bai, P., Kuriyama, N., Maebashi, T., Fujiwara, Y., Bazant, M. Z., & Li, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.12.001 · Cited by 492
Self-citationLithium Plating Mechanism, Detection, and Mitigation in Lithium-Ion Batteries
Lin, X., Khosravinia, K., Hu, X., Li, J., & Lu, W. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100953 · Cited by 490
Self-citationIn situ analytical techniques for battery interface analysis
Tripathi, A. M., Su, W.-N., & Hwang, B. J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00180k · Cited by 488
Key Issues Hindering a Practical Lithium-Metal Anode
Fang, C., Wang, X., & Meng, Y. S. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.02.015 · Cited by 459
Two-Phase Electrochemical Lithiation in Amorphous Silicon
Wang, J. W., He, Y., Fan, F., Liu, X. H., Xia, S., Liu, Y., Harris, C. T., Li, H., Huang, J. Y., Mao, S. X., et al. (2013) · Nano Letters · doi:10.1021/nl304379k · Cited by 451
Self-citationNanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439
Guan, B. Y., Kushima, A., Yu, L., Li, S., Li, J., & Lou, X. W. (. (2017) · Advanced Materials · doi:10.1002/adma.201605902 · Cited by 421
Self-citationSilicon/Carbon Composite Anode Materials for Lithium-Ion Batteries
Dou, F., Shi, L., Chen, G., & Zhang, D. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-00028-w · Cited by 419
Yuan, Y., Amine, K., Lu, J., & Shahbazian-Yassar, R. (2017) · Nature Communications · doi:10.1038/ncomms15806 · Cited by 404
Silicon nanowires for Li-based battery anodes: a review
Zamfir, M. R., Nguyen, H. T., Moyen, E., Lee, Y. H., & Pribat, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11714f · Cited by 368
Zhang, Q., Chen, H., Luo, L., Zhao, B., Luo, H., Han, X., Wang, J., Wang, C., Yang, Y., Zhu, T., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00239h · Cited by 337
Self-citationZheng, Z., Wu, H.-H., Liu, H., Zhang, Q., He, X., Yu, S., Petrova, V., Feng, J., Kostecki, R., Liu, P., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b08575 · Cited by 334
Status and challenges facing representative anode materials for rechargeable lithium batteries
Zhang, L., Zhu, C., Yu, S., Ge, D., & Zhou, H. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.08.001 · Cited by 314
Li, W., Sun, X., & Yu, Y. (2017) · Small Methods · doi:10.1002/smtd.201600037 · Cited by 308
Probing the Failure Mechanism of SnO2 Nanowires for Sodium-Ion Batteries
Gu, M., Kushima, A., Shao, Y., Zhang, J.-G., Liu, J., Browning, N. D., Li, J., & Wang, C. (2013) · Nano Letters · doi:10.1021/nl402633n · Cited by 296
Self-citationLiu, Y., Fan, F., Wang, J., Liu, Y., Chen, H., Jungjohann, K. L., Xu, Y., Zhu, Y., Bigio, D., Zhu, T., et al. (2014) · Nano Letters · doi:10.1021/nl500970a · Cited by 282
Self-citation
Metadata
- Authors
- Liu, X. H., Liu, Y., Kushima, A., Zhang, S., Zhu, T., Li, J., & Huang, J. Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2012-05-31
- Volume
- 2
- Issue
- 7
- Pages
- 722-741
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2065575761
- Cited by
- 408
- References
- 90
- FWCI
- 26.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.