The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Structural Design of Cathodes for Li‐S Batteries
Abstract
Battery technologies involving Li‐S chemistries have been touted as one of the most promising next generation systems. The theoretical capacity of sulfur is nearly an order of magnitude higher than current Li‐ion battery insertion cathodes and when coupled with a Li metal anode, Li‐S batteries promise specific energies nearly five‐fold higher. However, this assertion only holds if sulfur cathodes could be designed in the same manner as cathodes for Li‐ion batteries. Here, the recent efforts to engineer high capacity, thick, sulfur‐based cathodes are explored. Various works are compared in terms of capacity, areal mass loading, and fraction of conductive additive, which are the critical parameters dictating the potential for a device to achieve a specific energy higher than current Li‐ion batteries (i.e., >200 Wh kg−1). While an inferior specific energy is projected in the majority of cases, several promising strategies have the potential to achieve >500 Wh kg−1. The challenges associated with the limited cycle‐life of these systems due to both the polysulfide shuttle phenomenon and the rapid degradation of the Li metal anode that is experienced at the current densities required to charge high specific energy batteries in a reasonable timeframe are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Cited by
Batteries and fuel cells for emerging electric vehicle markets
Cano, Z. P., Banham, D., Ye, S., Hintennach, A., Lu, J., Fowler, M., & Chen, Z. (2018) · Nature Energy · doi:10.1038/s41560-018-0108-1 · Cited by 2,873
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Silicon‐Based Anodes for Lithium‐Ion Batteries: From Fundamentals to Practical Applications
Feng, K., Li, M., Liu, W., Kashkooli, A. G., Xiao, X., Cai, M., & Chen, Z. (2018) · Small · doi:10.1002/smll.201702737 · Cited by 1,042
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Metadata
- Authors
- Pope, M. A., & Aksay, I. A.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-04-14
- Volume
- 5
- Issue
- 16
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2094563023
- Cited by
- 500
- References
- 1
- FWCI
- 28.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structural Design of Cathodes for Li‐S Batteries. https://app.cochat.ai/papers/10.1002/aenm.201500124
- The paper
- Pope, M. A., & Aksay, I. A. (2015). Structural Design of Cathodes for Li‐S Batteries. Advanced Energy Materials. https://doi.org/10.1002/aenm.201500124
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.