The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Structural Design of Cathodes for Li‐S Batteries
Abstract
Battery technologies involving Li‐S chemistries have been touted as one of the most promising next generation systems. The theoretical capacity of sulfur is nearly an order of magnitude higher than current Li‐ion battery insertion cathodes and when coupled with a Li metal anode, Li‐S batteries promise specific energies nearly five‐fold higher. However, this assertion only holds if sulfur cathodes could be designed in the same manner as cathodes for Li‐ion batteries. Here, the recent efforts to engineer high capacity, thick, sulfur‐based cathodes are explored. Various works are compared in terms of capacity, areal mass loading, and fraction of conductive additive, which are the critical parameters dictating the potential for a device to achieve a specific energy higher than current Li‐ion batteries (i.e., >200 Wh kg−1). While an inferior specific energy is projected in the majority of cases, several promising strategies have the potential to achieve >500 Wh kg−1. The challenges associated with the limited cycle‐life of these systems due to both the polysulfide shuttle phenomenon and the rapid degradation of the Li metal anode that is experienced at the current densities required to charge high specific energy batteries in a reasonable timeframe are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Transport properties of two finite armchair graphene nanoribbons
Rosales, L., & González, J. W. (2013) · Nanoscale Research Letters · doi:10.1186/1556-276x-8-1 · Cited by 1,956
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Song, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
A review of lithium deposition in lithium-ion and lithium metal secondary batteries
Li, Z., Huang, J., Yann Liaw, B., Metzler, V., & Zhang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.099 · Cited by 938
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Roberts, A. D., Li, X., & Zhang, H. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00071d · Cited by 659
Cathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures
Demir-Cakan, R., Morcrette, M., Nouar, F., Davoisne, C., Devic, T., Gonbeau, D., Dominko, R., Serre, C., Férey, G., & Tarascon, J.-M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2062659 · Cited by 630
A reversible graphite-lithium negative electrode for electrochemical generators
Yazami, R., & Touzain, P. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87040-2 · Cited by 624
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
Amini, A., & Cheng, C. (2013) · Scientific Reports · doi:10.1038/srep03316 · Cited by 594
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
Quantifying tortuosity in porous Li-ion battery materials
Thorat, I. V., Stephenson, D. E., Zacharias, N. A., Zaghib, K., Harb, J. N., & Wheeler, D. R. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.032 · Cited by 571
Li, G., Li, G., Ye, S., & Gao, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200017 · Cited by 528
Optimization of mesoporous carbon structures for lithium–sulfur battery applications
Li, X., Cao, Y., Qi, W., Saraf, L. V., Xiao, J., Nie, Z., Mietek, J., Zhang, J.-G., Schwenzer, B., & Liu, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12979a · Cited by 454
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance
Song, M.-K., Zhang, Y., & Cairns, E. J. (2013) · Nano Letters · doi:10.1021/nl402793z · Cited by 427
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571533 · Cited by 424
Yang, X., Zhang, L., Zhang, F., Huang, Y., & Chen, Y. (2014) · ACS Nano · doi:10.1021/nn501284q · Cited by 396
A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage
Yang, Y., Zheng, G., & Cui, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00072a · Cited by 390
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Lithium Superionic Sulfide Cathode for All-Solid Lithium–Sulfur Batteries
Lin, Z., Liu, Z., Dudney, N. J., & Liang, C. (2013) · ACS Nano · doi:10.1021/nn400391h · Cited by 378
Miao, R., Yang, J., Feng, X., Jia, H., Wang, J., & Nuli, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.011 · Cited by 361
Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries
Cao, Y., Li, X., Aksay, I. A., Lemmon, J., Nie, Z., Yang, Z., & Liu, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02477e · Cited by 356
Self-citationFormation of lithium polysulfides in aprotic media
Rauh, R. D., Shuker, F. S., Marston, J. M., & Brummer, S. B. (1977) · Journal of Inorganic and Nuclear Chemistry · doi:10.1016/0022-1902(77)80198-x · Cited by 338
Smith, J. R., Walsh, F. C., & Clarke, R. L. (1998) · Journal of Applied Electrochemistry · doi:10.1023/a:1003469427858 · Cited by 334
High-rate lithium–sulfur batteries promoted by reduced graphene oxide coating
Li, N., Zheng, M., Lu, H., Hu, Z., Shen, C., Chang, X., Ji, G., Cao, J., & Shi, Y. (2012) · Chemical Communications · doi:10.1039/c2cc17912a · Cited by 331
Yim, T., Park, M.-S., Yu, J.-S., Kim, K. J., Im, K. Y., Kim, J.-H., Jeong, G., Jo, Y. N., Woo, S.-G., Kang, K. S., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.039 · Cited by 328
Ionic Liquid Electrolytes for Lithium–Sulfur Batteries
Park, J.-W., Ueno, K., Tachikawa, N., Dokko, K., & Watanabe, M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp408037e · Cited by 317
Lee, J. T., Zhao, Y., Thieme, S., Kim, H., Oschatz, M., Borchardt, L., Magasinski, A., Cho, W., Kaskel, S., & Yushin, G. (2013) · Advanced Materials · doi:10.1002/adma.201301579 · Cited by 315
Sulfur Cathodes with Hydrogen Reduced Titanium Dioxide Inverse Opal Structure
Liang, Z., Zheng, G., Li, W., Seh, Z. W., Yao, H., Yan, K., Kong, D., & Cui, Y. (2014) · ACS Nano · doi:10.1021/nn501308m · Cited by 313
A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers
Marks, T., Trussler, S., Smith, A. J., Xiong, D., & Dahn, J. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515072 · Cited by 290
Fu, Y., & Manthiram, A. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300950m · Cited by 278
Understanding of Sulfurized Polyacrylonitrile for Superior Performance Lithium/Sulfur Battery
Zhang, S. (2014) · Energies · doi:10.3390/en7074588 · Cited by 261
Polysulfide dissolution control: the common ion effect
Shin, E. S., Kim, K., Oh, S. H., & Cho, W. I. (2013) · Chem. Commun. · doi:10.1039/c2cc36986a · Cited by 247
A thermophysical approach to the proton pump vacuolar-ATPase.
Lucia, U., Ponzetto, A., & Deisboeck, T. (2014) · Institutional Research Information System University of Turin (University of Turin) · Cited by 241
Design and Optimization of a Natural Graphite/Iron Phosphate Lithium-Ion Cell
Srinivasan, V., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1785013 · Cited by 227
Park, J.-W., Yamauchi, K., Takashima, E., Tachikawa, N., Ueno, K., Dokko, K., & Watanabe, M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp400153m · Cited by 213
One-step synthesis of a sulfur-impregnated graphene cathode for lithium–sulfur batteries
Park, M., Yu, J., Kim, K. J., Jeong, G., Kim, J., Jo, Y.-N., Hwang, U., Kang, S.-J., Woo, T., & Kim, Y. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40727b · Cited by 197
Self-weaving sulfur–carbon composite cathodes for high rate lithium–sulfur batteries
Su, Y.-S., Fu, Y., & Manthiram, A. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp42796f · Cited by 184
Elazari, R., Salitra, G., Talyosef, Y., et al. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3479828 · Cited by 177
Rechargeable lithiumsulfur battery (extended abstract)
Peled, E., Gorenshtein, A., Segal, M., & Sternberg, Y. (1989) · Journal of Power Sources · doi:10.1016/0378-7753(89)80133-8 · Cited by 171
Hagen, M., Dörfler, S., Fanz, P., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.004 · Cited by 154
Discharge process of Li/PVdF/S cells at room temperature
Ryu, H.-S., Ahn, H., Kim, K.-W., et al. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.037 · Cited by 146
Morphological Transitions on Lithium Metal Anodes
López, C. M., Vaughey, J. T., & Dees, D. W. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3158548 · Cited by 144
Rao, M., Song, X., & Cairns, E. J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.047 · Cited by 134
Feng, X., Song, M., Stolte, W. C., Gardenghi, D. J., Zhang, D., Sun, X., Zhu, J., Cairns, E. J., & Guo, J. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp01341g · Cited by 132
Schneider, H., Garsuch, A., Panchenko, A. A., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.061 · Cited by 123
Key Parameters Governing the Energy Density of Rechargeable Li/S Batteries
Gao, J., & Abruña, H. D. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5001819 · Cited by 113
A lithium sulfur battery with high power density
Nagata, H., & Chikusa, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.106 · Cited by 107
Costache, M. V., Bridoux, G., Neumann, I., & Valenzuela, S. O. (2011) · Nature Materials · doi:10.1038/nmat3201 · Cited by 99
Wang, L., & Byon, H. R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.068 · Cited by 97
Simple, scalable, and economical preparation of sulfur–PAN composite cathodes for Li/S batteries
Konarov, A., Gosselink, D., Doan, T. N. L., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.078 · Cited by 80
Density of Salt Solutions: Effect of Ions on the Apparent Density of Water
Dougherty, R. C. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp010097r · Cited by 73
Ammonia as a case study for the spontaneous ionization of a simple hydrogen-bonded compound
Palasyuk, T., Troyan, I., Eremets, M., Drozd, V., Medvedev, S., Zaleski–Ejgierd, P., Magos–Palasyuk, E., Wang, H., Bonev, S. A., Dudenko, D., et al. (2014) · Nature Communications · doi:10.1038/ncomms4460 · Cited by 58
Low surface area graphene/cellulose composite as a host matrix for lithium sulphur batteries
Patel, M. U. M., Luong, N. D., Seppälä, J. V., Tchernychova, E., & Dominko, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.081 · Cited by 54
Effect of sulfur loading on energy density of lithium sulfur batteries
Kang, S.-H., Zhao, X., Manuel, J., et al. (2014) · physica status solidi (a) · doi:10.1002/pssa.201330569 · Cited by 43
Electrochemical characteristics of sulfur composite cathode for reversible lithium storage
He, X., Ren, J., Wang, L., Pu, W., Wan, C., & Jiang, C. (2008) · Ionics · doi:10.1007/s11581-008-0267-3 · Cited by 26
Cited by
Batteries and fuel cells for emerging electric vehicle markets
Cano, Z. P., Banham, D., Ye, S., Hintennach, A., Lu, J., Fowler, M., & Chen, Z. (2018) · Nature Energy · doi:10.1038/s41560-018-0108-1 · Cited by 2,873
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Metadata
- Authors
- Pope, M. A., & Aksay, I. A.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-04-14
- Volume
- 5
- Issue
- 16
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2094563023
- Cited by
- 500
- References
- 81
- FWCI
- 28.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.