The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Structural Design of Cathodes for Li‐S Batteries
Abstract
Battery technologies involving Li‐S chemistries have been touted as one of the most promising next generation systems. The theoretical capacity of sulfur is nearly an order of magnitude higher than current Li‐ion battery insertion cathodes and when coupled with a Li metal anode, Li‐S batteries promise specific energies nearly five‐fold higher. However, this assertion only holds if sulfur cathodes could be designed in the same manner as cathodes for Li‐ion batteries. Here, the recent efforts to engineer high capacity, thick, sulfur‐based cathodes are explored. Various works are compared in terms of capacity, areal mass loading, and fraction of conductive additive, which are the critical parameters dictating the potential for a device to achieve a specific energy higher than current Li‐ion batteries (i.e., >200 Wh kg−1). While an inferior specific energy is projected in the majority of cases, several promising strategies have the potential to achieve >500 Wh kg−1. The challenges associated with the limited cycle‐life of these systems due to both the polysulfide shuttle phenomenon and the rapid degradation of the Li metal anode that is experienced at the current densities required to charge high specific energy batteries in a reasonable timeframe are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Cited by
Batteries and fuel cells for emerging electric vehicle markets
Cano, Z. P., Banham, D., Ye, S., Hintennach, A., Lu, J., Fowler, M., & Chen, Z. (2018) · Nature Energy · doi:10.1038/s41560-018-0108-1 · Cited by 2,873
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Silicon‐Based Anodes for Lithium‐Ion Batteries: From Fundamentals to Practical Applications
Feng, K., Li, M., Liu, W., Kashkooli, A. G., Xiao, X., Cai, M., & Chen, Z. (2018) · Small · doi:10.1002/smll.201702737 · Cited by 1,042
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Material design and engineering of next-generation flow-battery technologies
Park, M., Ryu, J., Wang, W., & Cho, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.80 · Cited by 841
Hou, T.-Z., Chen, X., Peng, H.-J., Huang, J.-Q., Li, B.-Q., Zhang, Q., & Li, B. (2016) · Small · doi:10.1002/smll.201600809 · Cited by 789
Conversion cathodes for rechargeable lithium and lithium-ion batteries
Wu, F., & Yushin, G. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02326f · Cited by 723
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Xue, W., Shi, Z., Suo, L., Wang, C., Wang, Z., Wang, H., So, K. P., Maurano, A., Yu, D., Chen, Y., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0351-0 · Cited by 591
Hu, G., Xu, C., Sun, Z., Wang, S., Cheng, H., Li, F., & Ren, W. (2016) · Advanced Materials · doi:10.1002/adma.201504765 · Cited by 532
Sulfur and Its Role In Modern Materials Science
Boyd, D. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201604615 · Cited by 512
Metal–Organic Frameworks (MOFs) and MOF-Derived Materials for Energy Storage and Conversion
Zhang, X., Chen, A., Zhong, M., Zhang, Z., Zhang, X., Zhou, Z., & Bu, X.-H. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0024-x · Cited by 481
Progress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Chung, S., Chang, C., & Manthiram, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801188 · Cited by 477
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Chen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
A Review of Functional Binders in Lithium–Sulfur Batteries
Yuan, H., Huang, J., Peng, H., Titirici, M., Xiang, R., Chen, R., Liu, Q., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802107 · Cited by 438
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Zhang, J., Yang, C., Yin, Y., Wan, L., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602913 · Cited by 418
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Graphene‐Based Nanocomposites for Energy Storage
Ji, L., Meduri, P., Agubra, V., Xiao, X., & Alcoutlabi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502159 · Cited by 385
Li, S., Zhang, W., Zheng, J., Lv, M., Song, H., & Du, L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000779 · Cited by 373
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Sulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Chen, K., Sun, Z., Fang, R., Shi, Y., Cheng, H., & Li, F. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707592 · Cited by 339
Status and Prospects of MXene‐Based Lithium–Sulfur Batteries
Zhao, Q., Zhu, Q., Liu, Y., & Xu, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100457 · Cited by 334
A Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601630 · Cited by 321
A high-entropy metal oxide as chemical anchor of polysulfide for lithium-sulfur batteries
Zheng, Y., Yi, Y., Fan, M., Liu, H., Li, X., Zhang, R., Li, M., & Qiao, Z.-A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.030 · Cited by 315
Recent advances in energy materials by electrospinning
Liu, Q., Zhu, J., Zhang, L., & Qiu, Y. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.281 · Cited by 306
Huang, S., Lim, Y. V., Zhang, X., Wang, Y., Zheng, Y., Kong, D., Ding, M., Yang, S. A., & Yang, H. Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.052 · Cited by 303
Progress and Perspective of Solid‐State Lithium–Sulfur Batteries
Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282
12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Rechargeable Batteries: Grasping for the Limits of Chemistry
Berg, E. J., Villevieille, C., Streich, D., Trabesinger, S., & Novák, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0081514jes · Cited by 270
Cyclic Voltammetry in Lithium–Sulfur Batteries—Challenges and Opportunities
Huang, X., Wang, Z., Knibbe, R., Luo, B., Ahad, S. A., Sun, D., & Wang, L. (2019) · Energy Technology · doi:10.1002/ente.201801001 · Cited by 269
Gao, B., Li, X., Ding, K., Huang, C., Li, Q., Chu, P. K., & Huo, K. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta05760e · Cited by 266
Hierarchical Structures Based on Two‐Dimensional Nanomaterials for Rechargeable Lithium Batteries
Cong, L., Xie, H., & Li, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601906 · Cited by 261
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
Yoo, J., Cho, S.-J., Jung, G. Y., Kim, S. H., Choi, K.-H., Kim, J.-H., Lee, C. K., Kwak, S. K., & Lee, S.-Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00870 · Cited by 255
A review on machine learning-guided design of energy materials
Kim, S., Xu, J., Shang, W., Xu, Z., Lee, E., & Luo, T. (2024) · Progress in Energy · doi:10.1088/2516-1083/ad7220 · Cited by 19
Metadata
- Authors
- Pope, M. A., & Aksay, I. A.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-04-14
- Volume
- 5
- Issue
- 16
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2094563023
- Cited by
- 500
- References
- 81
- FWCI
- 28.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.