The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Safety‐Reinforced Poly(Propylene Carbonate)‐Based All‐Solid‐State Polymer Electrolyte for Ambient‐Temperature Solid Polymer Lithium Batteries
Abstract
An integrated preparation of safety‐reinforced poly(propylene carbonate)‐based all‐solid polymer electrolyte is shown to be applicable to ambient‐temperature solid polymer lithium batteries. In contrast to pristine poly(ethylene oxide) solid polymer electrolyte, this solid polymer electrolyte exhibits higher ionic conductivity, wider electrochemical window, better mechanical strength, and superior rate performance at 20 °C. Moreover, lithium iron phosphate/lithium cell using such solid polymer electrolyte can charge and discharge even at 120 °C. It is also noted that the solid‐state soft‐package lithium cells assembled with this solid polymer electrolyte can still power a red light‐emitting diode lamp without suffering from internal short‐circuit failures even after cutting off one part of the battery. Considering the aspects mentioned above, the solid polymer electrolyte is eligible for practical lithium battery applications with improved reliability and safety. Just as important, a new perspective that the degree of amorphous state of polymer is also as critical as its low glass transition temperature for the exploration of room temperature solid polymer electrolyte is illustrated. In all, this study opens up a kind of new avenue that could be a milestone to the development of high‐voltage and ambient‐temperature all‐solid‐state polymer electrolytes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Self-citationArora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
Ultrasonic metamaterials with negative modulus
Fang, N., Xi, D., Xu, J., Ambati, M., Srituravanich, W., Sun, C., & Zhang, X. (2006) · Nature Materials · doi:10.1038/nmat1644 · Cited by 2,020
Research on Advanced Materials for Li‐ion Batteries
Li, H., Wang, Z., Chen, L., & Huang, X. (2009) · Advanced Materials · doi:10.1002/adma.200901710 · Cited by 1,803
Self-citationSingle-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Bouchet, R., Maria, S., Meziane, R., Aboulaich, A., Lienafa, L., Bonnet, J.-P., Phan, T. N. T., Bertin, D., Gigmes, D., Devaux, D., et al. (2013) · Nature Materials · doi:10.1038/nmat3602 · Cited by 1,425
Recent advances in rechargeable battery materials: a chemist’s perspective
Palacín, M. R. (2009) · Chemical Society Reviews · doi:10.1039/b820555h · Cited by 1,423
Zhou, X., Wan, L., & Guo, Y. (2013) · Advanced Materials · doi:10.1002/adma.201300071 · Cited by 1,144
Self-citation(1979) · Proceedings of the Analytical Division of the Chemical Society · doi:10.1039/ad9791600143 · Cited by 904
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
Mussel‐Inspired Polydopamine‐Treated Polyethylene Separators for High‐Power Li‐Ion Batteries
Ryou, M., Lee, Y. M., Park, J., & Choi, J. W. (2011) · Advanced Materials · doi:10.1002/adma.201100303 · Cited by 721
Increasing the conductivity of crystalline polymer electrolytes
Christie, A. M., Lilley, S. J., Staunton, E., Andreev, Y. G., & Bruce, P. G. (2005) · Nature · doi:10.1038/nature03186 · Cited by 466
Schulze, M. W., McIntosh, L. D., Hillmyer, M. A., & Lodge, T. P. (2014) · Nano Letters · doi:10.1021/nl4034818 · Cited by 356
Ionic Conductivity in the Crystalline Polymer Electrolytes PEO6:LiXF6, X = P, As, Sb
Stoeva, Z., Martin-Litas, I., Staunton, E., Andreev, Y. G., & Bruce, P. G. (2003) · Journal of the American Chemical Society · doi:10.1021/ja029326t · Cited by 345
Abuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells
Larsson, F., & Mellander, B.-E. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0311410jes · Cited by 319
Biomass-derived materials for electrochemical energy storages
Zhang, L., Liu, Z., Cui, G., & Chen, L. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.09.003 · Cited by 313
Self-citationZhang, J., Yue, L., Kong, Q., Liu, Z., Zhou, X., Zhang, C., Xu, Q., Zhang, B., Ding, G., Qin, B., et al. (2014) · Scientific Reports · doi:10.1038/srep03935 · Cited by 289
Self-citationLithium-ion batteries with high charge rate capacity: Influence of the porous separator
Djian, D., Alloin, F., Martinet, S., Lignier, H., & Sanchez, J. Y. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.018 · Cited by 225
Thermodynamics of Electrochemical Lithium Storage
Maier, J. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201205569 · Cited by 224
Suppression of aluminum current collector corrosion in ionic liquid containing electrolytes
Kühnel, R., Lübke, M., Winter, M., Passerini, S., & Balducci, A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.054 · Cited by 197
Composite nonwoven separator for lithium-ion battery: Development and characterization
Cho, T.-H., Tanaka, M., Ohnishi, H., Kondo, Y., Yoshikazu, M., Nakamura, T., & Sakai, T. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.01.018 · Cited by 186
How Cellulose Stretches: Synergism between Covalent and Hydrogen Bonding
Altaner, C. M., Thomas, L. H., Fernandes, A. N., & Jarvis, M. C. (2014) · Biomacromolecules · doi:10.1021/bm401616n · Cited by 177
Co-polyimide-coated polyethylene separators for enhanced thermal stability of lithium ion batteries
Song, J., Ryou, M.-H., Son, B., Lee, J.-N., Lee, D. J., Lee, Y. M., Choi, J. W., & Park, J.-K. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.06.078 · Cited by 172
Chang, W., Choi, J.-W., Im, J.-C., & Lee, J. K. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.104 · Cited by 165
Shi, X., & Gan, Z. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.09.024 · Cited by 159
PE-g-MMA polymer electrolyte membrane for lithium polymer battery
Gao, K., Xin-guo, H., Yi, T., & Dai, C. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.05.049 · Cited by 158
Effect of Anions on Lithium Ion Conduction in Poly(ethylene carbonate)-based Polymer Electrolytes
Tominaga, Y., Yamazaki, K., & Nanthana, V. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0211502jes · Cited by 153
Ma, X., Chang, P. R., Yu, J., & Wang, N. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.033 · Cited by 118
Angulakshmi, N., Kumar, R., Kulandainathan, M. A., & Stephan, A. M. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp506464v · Cited by 117
Kim, D.-G., Shim, J., Lee, J. H., Kwon, S.-J., Baik, J.-H., & Lee, J.-C. (2013) · Polymer · doi:10.1016/j.polymer.2013.08.049 · Cited by 100
Bronstein, L. M., Joo, C. G., Karlinsey, R. L., Ryder, A., & Zwanziger, J. W. (2001) · Chemistry of Materials · doi:10.1021/cm011066b · Cited by 87
Lee, K.-S., Sun, Y.-K., Noh, J.-I., Song, K., & Kim, D.-W. (2009) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.08.012 · Cited by 83
Li, Y., Wu, X., Kim, J.-H., Xin, S., Su, J., Yang, Y., Lee, J., & Guo, Y. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.148 · Cited by 75
Self-citationZhang, Z., Lee, J. H., Lee, S., et al. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.034 · Cited by 73
Solid-state electrochromic devices using pTMC/PEO blends as polymer electrolytes
Barbosa, P., Rodrigues, L. C., Silva, M. M. P., Smith, M. J., Parola, A. J., Piña, F., & Pinheiro, C. A. M. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.03.031 · Cited by 57
Safety of large-capacity lithium-ion battery and evaluation of battery system for telecommunications
Tsujikawa, T., Yabuta, K., Arakawa, M., & Hayashi, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.155 · Cited by 56
Zhang, Z., Shi, Q., Peng, J., Song, J., Chen, Q., Yang, J., Gong, Y., Ji, R., He, X., & Lee, J. H. (2006) · Polymer · doi:10.1016/j.polymer.2006.09.041 · Cited by 55
He, D., Kim, D. W., Park, J. S., Cho, S. Y., & Kang, Y. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.069 · Cited by 51
Zhang, L., Zheng, Z., Xi, J., Gao, Y., Ao, Q., Gong, Y., Zhao, N., & Zhang, X. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.04.007 · Cited by 44
Ji, J., Keen, J., & Zhong, W.-H. K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.041 · Cited by 42
Tong, Y., Chen, L., He, X., & Chen, Y. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.072 · Cited by 40
Self-citation
Cited by
Polymer Electrolytes for Lithium-Based Batteries: Advances and Prospects
Zhou, D., Shanmukaraj, D., Tkacheva, A., Armand, M., & Wang, G. (2019) · Chem · doi:10.1016/j.chempr.2019.05.009 · Cited by 1,539
Chen, L., Li, Y., Li, S.-P., Fan, L.-Z., Nan, C.-W., & Goodenough, J. B. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.037 · Cited by 1,423
Self-citationGao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Self-citationBeyond PEO—Alternative host materials for Li + -conducting solid polymer electrolytes
Mindemark, J., Lacey, M. J., Bowden, T., & Brandell, D. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.12.004 · Cited by 1,143
Metadata
- Authors
- Zhang, J., Zhao, J., Yue, L., Wang, Q., Chai, J., Liu, Z., Zhou, X., Li, H., Guo, Y., Cui, G., & Chen, L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-10-05
- Volume
- 5
- Issue
- 24
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2162158975
- Cited by
- 636
- References
- 49
- FWCI
- 19.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.