The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
Solvent Engineering Boosts the Efficiency of Paintable Carbon‐Based Perovskite Solar Cells to Beyond 14%
Abstract
Carbon‐based hole transport material (HTM)‐free perovskite solar cells (PSCs) have shown much promise for practical applications because of their high stability and low cost. However, the efficiencies of this kind of PSCs are still relatively low, especially for the simplest paintable carbon‐based PSCs, in comparison with the organic HTM‐based PSCs. This can be imputed to the perovskite deposition methods that are not very suitable for this kind of devices. A solvent engineering strategy based on two‐step sequential method is exploited to prepare a high‐quality perovskite layer for the paintable carbon‐based PSCs in which the solvent for CH 3 NH 3 I (MAI) solution at the second step is changed from isopropanol (IPA) to a mixed solvent of IPA/Cyclohexane (CYHEX). This mixed solvent not only accelerates the conversion of PbI 2 to CH 3 NH 3 PbI 3 but also suppresses the Ostwald ripening process resulting in a high‐quality perovskite layer, e.g., pure phase, even surface, and compact capping layer. The paintable carbon‐based PSCs fabricated from IPA/CYHEX solvent exhibits a considerable enhancement in photovoltaic performance and performance reproducibility in comparison with that from pure IPA, especially on fill factor (FF), owing mainly to the better contact of perovskite/carbon interface, lower trap density in perovskite, higher light absorption ability, and faster charge transport of perovskite layer. As a result, the highest power conversion efficiency (PCE) of 14.38% is obtained, which is a record value for carbon‐based HTM‐free PSCs. Furthermore, a PCE of as high as 10% is achieved for the large area device (1 cm 2), also the highest of its kind.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Solar cell efficiency tables (Version 45)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2573 · Cited by 2,440
Electrochemical Impedance Spectroscopic Analysis of Dye-Sensitized Solar Cells
Wang, Q., Moser, J.-E., & Grätzel, M. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp052768h · Cited by 2,002
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Excitons versus free charges in organo-lead tri-halide perovskites
D’Innocenzo, V., Grancini, G., Alcocer, M. J. P., Kandada, A. R. S., Stranks, S. D., Lee, M. M., Lanzani, G., Snaith, H. J., & Petrozza, A. (2014) · Nature Communications · doi:10.1038/ncomms4586 · Cited by 1,767
Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Graphdiyne and graphyne: from theoretical predictions to practical construction
Li, Y., Xu, L., Liu, H., & Li, Y. (2014) · Chemical Society Reviews · doi:10.1039/c3cs60388a · Cited by 1,162
Wang, J. T.-W., Ball, J. M., Barea, E. M., Abate, A., Alexander-Webber, J. A., Huang, J., Saliba, M., Mora-Sero, I., Bisquert, J., Snaith, H. J., et al. (2014) · Nano Letters · doi:10.1021/nl403997a · Cited by 1,072
Trap States in Lead Iodide Perovskites
Wu, X., Trinh, M. T., Niesner, D., Zhu, H., Norman, Z., Owen, J. S., Yaffe, O., Kudisch, B. J., & Zhu, X.-Y. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512833n · Cited by 988
Zhang, W., Saliba, M., Moore, D. T., Pathak, S. K., Hörantner, M. T., Stergiopoulos, T., Stranks, S. D., Eperon, G. E., Alexander-Webber, J. A., Abate, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms7142 · Cited by 920
Wu, Y., Islam, A., Yang, X., Qin, C., Liu, J., Zhang, K., Peng, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01624f · Cited by 887
Ku, Z., Rong, Y., Xu, M., Liu, T., & Han, H. (2013) · Scientific Reports · doi:10.1038/srep03132 · Cited by 877
Depleted hole conductor-free lead halide iodide heterojunction solar cells
Laban, W. A., & Etgar, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42282h · Cited by 759
Yan, K., Long, M., Zhang, T., Wei, Z., Chen, H., Yang, S., & Xu, J. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00321 · Cited by 739
Self-citationOga, H., Saeki, A., Ogomi, Y., Hayase, S., & Seki, S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja506936f · Cited by 712
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Kim, B. J., Kim, D. H., Lee, Y.-Y., Shin, H.-W., Han, G. S., Hong, J. S., Mahmood, K., Ahn, T. K., Joo, Y.-C., Hong, K. S., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02441a · Cited by 679
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
Self-citationTuning the Light Emission Properties by Band Gap Engineering in Hybrid Lead Halide Perovskite
D’Innocenzo, V., Srimath Kandada, A. R., De Bastiani, M., Gandini, M., & Petrozza, A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja511198f · Cited by 623
Im, J.-H., Kim, H.-S., & Park, N.-G. (2014) · APL MATERIALS · doi:10.1063/1.4891275 · Cited by 495
Heo, J. H., Song, D. H., Han, H. J., Kim, S. Y., Kim, J. H., Kim, D., Shin, H. W., Ahn, T. K., Wolf, C., Lee, T., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500048 · Cited by 474
Hole Selective NiO Contact for Efficient Perovskite Solar Cells with Carbon Electrode
Xu, X., Liu, Z., Zuo, Z., Zhang, M., Zhao, Z., Shen, Y., Zhou, H., Chen, Q., Yang, Y., & Wang, M. (2015) · Nano Letters · doi:10.1021/nl504701y · Cited by 445
Fu, Y., Meng, F., Rowley, M. B., Thompson, B. J., Shearer, M. J., Ma, D., Hamers, R. J., Wright, J. C., & Jin, S. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02651 · Cited by 418
Li, X., Tschumi, M., Han, H., Babkair, S. S., Alzubaydi, R. A., Ansari, A. A., Habib, S. S., Nazeeruddin, M. K., Zakeeruddin, S. M., & Grätzel, M. (2015) · Energy Technology · doi:10.1002/ente.201500045 · Cited by 379
Kuang, C., Tang, G., Jiu, T., Yang, H., Liu, H., Li, B., Luo, W., Li, X., Zhang, W., Lu, F., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00787 · Cited by 376
Xiao, J., Shi, J., Liu, H., Xu, Y., Lv, S., Luo, Y., Li, D., Meng, Q., & Li, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401943 · Cited by 314
Charge Transport and Recombination in Perovskite (CH3NH3)PbI3 Sensitized TiO2 Solar Cells
Zhao, Y., & Zhu, K. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz401527q · Cited by 312
Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites
Wei, Z., Yan, K., Chen, H., Yi, Y., Zhang, T., Long, X., Li, J., Zhang, L., Wang, J., & Yang, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01983k · Cited by 299
Self-citationRemnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?
Cao, D. H., Stoumpos, C. C., Malliakas, C. D., Katz, M. J., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2014) · APL Materials · doi:10.1063/1.4895038 · Cited by 297
Zhou, H., Shi, Y., Dong, Q., Zhang, H., Xing, Y., Wang, K., Du, Y., & Ma, T. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5017069 · Cited by 290
Depletion region effect of highly efficient hole conductor free CH3NH3PbI3perovskite solar cells
Aharon, S., Gamliel, S., Cohen, B. E., & Etgar, L. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp00460d · Cited by 285
Zhang, F., Yang, X., Wang, H., Cheng, M., Zhao, J., & Sun, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504175x · Cited by 282
Shape Evolution and Single Particle Luminescence of Organometal Halide Perovskite Nanocrystals
Zhu, F., Men, L., Guo, Y., Zhu, Q., Bhattacharjee, U., Goodwin, P. M., Petrich, J. W., Smith, E. A., & Vela, J. (2015) · ACS Nano · doi:10.1021/nn507020s · Cited by 276
Yan, K., Wei, Z., Li, J., Chen, H., Yi, Y., Zheng, X., Long, X., Wang, Z., Wang, J., Xu, J., et al. (2015) · Small · doi:10.1002/smll.201403348 · Cited by 271
Self-citationZhang, T., Yang, M., Zhao, Y., & Zhu, K. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00843 · Cited by 270
Chen, H., Wei, Z., Zheng, X., & Yang, S. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.025 · Cited by 249
Self-citationThe effect of carbon counter electrodes on fully printable mesoscopic perovskite solar cells
Zhang, L., Liu, T., Liu, L., Hu, M., Yang, Y., Mei, A., & Han, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04647a · Cited by 241
Wei, H., Xiao, J., Yang, Y., Lv, S., Shi, J., Xu, X., Dong, J., Luo, Y., Li, D., & Meng, Q. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.042 · Cited by 236
Li, W., Dong, H., Guo, X., Li, N., Li, J., Niu, G., & Wang, L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta05196c · Cited by 216
Hu, M., Liu, L., Mei, A., Yang, Y., Liu, T., & Han, H. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03741c · Cited by 207
Guillén, E., Ramos, F. J., Anta, J. A., & Ahmad, S. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5069076 · Cited by 200
Yang, Y., Xiao, J., Wei, H., Zhu, L., Li, D., Luo, Y., Wu, H., & Meng, Q. (2014) · RSC Adv. · doi:10.1039/c4ra09519g · Cited by 191
The size effect of TiO2 nanoparticles on a printable mesoscopic perovskite solar cell
Yang, Y., Ri, K., Mei, A., Liu, L., Hu, M., Liu, T., Li, X., & Han, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta07030e · Cited by 168
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie · doi:10.1002/ange.201408638 · Cited by 124
Self-citationCrystal Morphologies of Organolead Trihalide in Mesoscopic/Planar Perovskite Solar Cells
Zhou, Y., Vasiliev, A. L., Wu, W., Yang, M., Pang, S., Zhu, K., & Padture, N. P. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00981 · Cited by 95
Semiconductor Nanocrystals as Light Harvesters in Solar Cells
Etgar, L. (2013) · Materials · doi:10.3390/ma6020445 · Cited by 86
Xiao, Y., Han, G., Li, Y., Li, M., Chang, Y., & Wu, J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03384a · Cited by 62
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%
Cui, P., Wei, D., Ji, J., Huang, H., Jia, E., Dou, S., Wang, T., Wang, W., & Li, M. (2019) · Nature Energy · doi:10.1038/s41560-018-0324-8 · Cited by 573
High‐Purity Inorganic Perovskite Films for Solar Cells with 9.72 % Efficiency
Duan, J., Zhao, Y., He, B., & Tang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800019 · Cited by 514
Chen, H., & Yang, S. (2017) · Advanced Materials · doi:10.1002/adma.201603994 · Cited by 384
Self-citationHighly Efficient and Stable Perovskite Solar Cells Based on Monolithically Grained CH3NH3PbI3 Film
Fei, C., Li, B., Zhang, R., Fu, H., Tian, J., & Cao, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602017 · Cited by 334
Metadata
- Authors
- Chen, H., Wei, Z., He, H., Zheng, X., Wong, K. S., & Yang, S.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-01-19
- Volume
- 6
- Issue
- 8
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2301558318
- Cited by
- 348
- References
- 62
- FWCI
- 27.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.