The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Opening of Bottleneck Pores for the Improvement of Nitrogen Doped Carbon Electrocatalysts
Abstract
A facile synthesis strategy to control the porosity of ionothermal nitrogen doped carbons is demonstrated. Adenine is used as cheap and biomass based precursor and a mixture of NaCl/ZnCl 2 as combined solvent‐porogen. Variation of the ratio between the two salt influences the pore structure over a wide range. The eutectic mixture leads to micro‐ and mesoporous material with high total pore volume (TPV) of 3.0 cm 3 g−1 and very high surface area of 2900 m 2 g−1 essentially rendering the product an “all‐surface‐area” nitrogen doped carbon. Increasing NaCl contents cause a continuous increase of the mesopore size and the formation of additional macropores resulting in a very high maximal TPV of 5.2 cm 3 g−1, showing 2540 m 2 g−1 specific surface area using 60 mol% NaCl. Interestingly, the electrocatalytic activity of the samples toward oxygen reduction is strongly affected by the detailed pore structure. The different—however, chemically equivalent—catalysts vary up to 70 mV in their half wave potentials (E 1/2).The sample with optimized pore system shows a high selectivity toward the favored four electron process and an outstanding E 1/2 of ≈880 mV versus reversible hydrogen electrode (RHE), which is one of the best values reported for nitrogen doped carbons so far.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions
Jiao, Y., Zheng, Y., Jaroniec, M., & Qiao, S. Z. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00470a · Cited by 5,388
Nanostructured Pt-alloy electrocatalysts for PEM fuel cell oxygen reduction reaction
Bing, Y., Liu, H., Zhang, L., Ghosh, D., & Zhang, J. (2010) · Chemical Society Reviews · doi:10.1039/b912552c · Cited by 1,154
The preparation of active carbons from coal by chemical and physical activation
Ahmadpour, A., & Do, D. D. (1996) · Carbon · doi:10.1016/0008-6223(95)00204-9 · Cited by 763
He, W., Jiang, C., Wang, J., & Lu, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201404333 · Cited by 386
Cited by
Wan, X., Liu, X., Li, Y., Yu, R., Zheng, L., Yan, W., Wang, H., Xu, M., & Shui, J. (2019) · Nature Catalysis · doi:10.1038/s41929-019-0237-3 · Cited by 1,379
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
Xie, X., Peng, L., Yang, H., Waterhouse, G. I. N., Shang, L., & Zhang, T. (2021) · Advanced Materials · doi:10.1002/adma.202101038 · Cited by 550
Wang, Q., Ji, Y., Lei, Y., Wang, Y., Wang, Y., Li, Y., & Wang, S. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00303 · Cited by 535
Surface/interface nanoengineering for rechargeable Zn–air batteries
Zhou, T., Zhang, N., Wu, C., & Xie, Y. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03634b · Cited by 501
Metadata
- Authors
- Pampel, J., & Fellinger, T.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-01-28
- Volume
- 6
- Issue
- 8
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2293908940
- Cited by
- 251
- References
- 5
- FWCI
- 7.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.