The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Wearable High‐Performance Supercapacitors Based on Silver‐Sputtered Textiles with FeCo2S4–NiCo2S4 Composite Nanotube‐Built Multitripod Architectures as Advanced Flexible Electrodes
Abstract
To achieve high‐performance wearable supercapacitors (SCs), a new class of flexible electrodes with favorable architectures allowing large porosity, high conductivity, and good mechanical stability is strongly needed. Here, this study reports the rational design and fabrication of a novel flexible electrode with nanotube‐built multitripod architectures of ternary metal sulfides' composites (FeCo 2 S 4–NiCo 2 S 4) on a silver‐sputtered textile cloth. Silver sputtering is applicable to almost all kinds of textiles, and S 2− concentration is optimized during sulfidation process to achieve such architectures and also a complete sulfidation assuring high conductivity. New insights into concentration‐dependent sulfidation mechanism are proposed. The additive‐free FeCo 2 S 4–NiCo 2 S 4 electrode shows a high specific capacitance of 1519 F g−1 at 5 mA cm−2 and superior rate capability (85.1% capacitance retention at 40 mA cm−2). All‐solid‐state SCs employing these advanced electrodes deliver high energy density of 46 W h kg−1 at 1070 W kg−1 as well as achieve remarkable cycling stability retaining 92% of initial capacitance after 3000 cycles at 10 mA cm−2, and outstanding reliability with no capacitance degradation under large twisting. These are attributed to the components' synergy assuring rich redox reactions, high conductivity as well as highly porous but robust architectures. An almost linear increase in capacitance with devices' area indicates possibility to meet various energy output requirements. This work provides a general, low‐cost route to wearable power sources.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flexible Energy‐Storage Devices: Design Consideration and Recent Progress
Wang, X., Lu, X., Liu, B., Chen, D., Tong, Y., & Shen, G. (2014) · Advanced Materials · doi:10.1002/adma.201400910 · Cited by 1,385
Flexible solid-state supercapacitors: design, fabrication and applications
Lu, X., Yu, M., Wang, G., Tong, Y., & Li, Y. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00960f · Cited by 1,323
Shen, L., Yu, L., Wu, H. B., Yu, X.-Y., Zhang, X., & Lou, X. W. (2015) · Nature Communications · doi:10.1038/ncomms7694 · Cited by 1,272
Wei, T., Chen, C., Chien, H., Lu, S., & Hu, C. (2010) · Advanced Materials · doi:10.1002/adma.200902175 · Cited by 1,191
Xiao, J., Wan, L., Yang, S., Xiao, F., & Wang, S. (2014) · Nano Letters · doi:10.1021/nl404199v · Cited by 1,110
Yang, P., Ding, Y., Lin, Z., Chen, Z., Li, Y., Qiang, P., Ebrahimi, M., Mai, W., Wong, C. P., & Wang, Z. L. (2014) · Nano Letters · doi:10.1021/nl404008e · Cited by 1,076
Nanoporous Ni(OH)2 Thin Film on 3D Ultrathin-Graphite Foam for Asymmetric Supercapacitor
Ji, J., Zhang, L. L., Ji, H., Li, Y., Zhao, X., Bai, X., Fan, X., Zhang, F., & Ruoff, R. S. (2013) · ACS Nano · doi:10.1021/nn4021955 · Cited by 1,072
Highly conductive NiCo2S4 urchin-like nanostructures for high-rate pseudocapacitors
Chen, H., Jiang, J., Zhang, L., Wan, H., Qi, T., & Xia, D. (2013) · Nanoscale · doi:10.1039/c3nr02958a · Cited by 947
Advances and challenges for flexible energy storage and conversion devices and systems
Li, L., Wu, Z., Yuan, S., & Zhang, X.-B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00318g · Cited by 895
Bao, L., Zang, J., & Li, X. (2011) · Nano Letters · doi:10.1021/nl104205s · Cited by 850
Cited by
Towards flexible solid-state supercapacitors for smart and wearable electronics
Dubal, D. P., Chodankar, N. R., Kim, D.-H., & Gomez-Romero, P. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00505a · Cited by 1,725
Research progress on conducting polymer based supercapacitor electrode materials
Meng, Q., Cai, K., Chen, Y., & Chen, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.040 · Cited by 1,405
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Towards establishing standard performance metrics for batteries, supercapacitors and beyond
Noori, A., El-Kady, M. F., Rahmanifar, M. S., Kaner, R. B., & Mousavi, M. F. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00581h · Cited by 1,303
Mixed Metal Sulfides for Electrochemical Energy Storage and Conversion
Yu, X. Y., & (David) Lou, X. W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701592 · Cited by 833
Paper‐Based Electrodes for Flexible Energy Storage Devices
Yao, B., Zhang, J., Kou, T., Song, Y., Liu, T., & Li, Y. (2017) · Advanced Science · doi:10.1002/advs.201700107 · Cited by 464
Kulkarni, P., Nataraj, S. K., Balakrishna, R. G., Nagaraju, D. H., & Reddy, M. V. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07329a · Cited by 421
Nickel-based materials for supercapacitors
Zhang, L., Shi, D., Liu, T., Jaroniec, M., & Yu, J. (2019) · Materials Today · doi:10.1016/j.mattod.2018.11.002 · Cited by 370
Liu, W., Niu, H., Yang, J., Cheng, K., Ye, K., Zhu, K., Wang, G., Cao, D., & Yan, J. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04976 · Cited by 335
Liu, S., Kang, L., Zhang, J., Jung, E., Lee, S., & Jun, S. C. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.017 · Cited by 325
Nagaraju, G., Chandra Sekhar, S., Krishna Bharat, L., & Yu, J. S. (2017) · ACS Nano · doi:10.1021/acsnano.7b04368 · Cited by 308
Balamurugan, J., Li, C., Aravindan, V., Kim, N. H., & Lee, J. H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803287 · Cited by 307
Green Flexible Electronics: Natural Materials, Fabrication, and Applications
Hui, Z., Zhang, L., Ren, G., Sun, G., Yu, H., & Huang, W. (2023) · Advanced Materials · doi:10.1002/adma.202211202 · Cited by 287
Ma, F., Lu, J., Pu, L., Wang, W., & Dai, Y. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.12.101 · Cited by 121
Metadata
- Authors
- Zhu, J., Tang, S., Wu, J., Shi, X., Zhu, B., & Meng, X.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-10-10
- Volume
- 7
- Issue
- 2
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2531616496
- Cited by
- 350
- References
- 44
- FWCI
- 16.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.