The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Significantly Enhanced Thermoelectric Properties of PEDOT:PSS Films through Sequential Post‐Treatments with Common Acids and Bases
Abstract
Thermoelectric (TE) materials are important for the sustainable development because they enable the direct harvesting of low‐quality heat into electricity. Among them, conducting polymers have attracted great attention arising from their advantages, such as flexibility, nontoxicity, easy availability, and intrinsically low thermal conductivity. In this work, a novel and facile method is reported to significantly enhance the TE property of poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films through sequential post‐treatments with common acids and bases. Compared with the as‐prepared PEDOT:PSS, both the Seebeck coefficients and electrical conductivities can be remarkably enhanced after the treatments. The oxidation level, which significantly impacts the TE property of the PEDOT:PSS films, can also be well tuned by controlling the experimental conditions during the base treatment. The optimal PEDOT:PSS films can have a Seebeck coefficient of 39.2 µV K−1 and a conductivity of 2170 S cm−1 at room temperature, and the corresponding power factor is 334 µW (m−1 K−2). The enhancement in the TE properties is attributed to the synergetic effect of high charge mobility by the acid treatment and the optimal oxidation level tuned by the base treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals
Zhao, L.-D., Lo, S.-H., Zhang, Y., Sun, H., Tan, G., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2014) · Nature · doi:10.1038/nature13184 · Cited by 5,218
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P. (2013) · Nature Materials · doi:10.1038/nmat3635 · Cited by 1,688
Thermoelectric Materials, Phenomena, and Applications: A Bird's Eye View
Tritt, T. M., & Subramanian, M. A. (2006) · MRS Bulletin · doi:10.1557/mrs2006.44 · Cited by 1,515
Ouyang, J., Xu, Q., Chu, C., Yang, Y., Li, G., & Shinar, J. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.001 · Cited by 1,438
Self-citationXia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
Self-citationZhang, Q., Sun, Y., Xu, W., & Zhu, D. (2014) · Advanced Materials · doi:10.1002/adma.201305371 · Cited by 999
Bubnova, O., Khan, Z. U., Wang, H., Braun, S., Evans, D. R., Fabretto, M., Hojati-Talemi, P., Dagnelund, D., Arlin, J.-B., Geerts, Y. H., et al. (2014) · Nature Materials · doi:10.1038/nmat3824 · Cited by 854
Cited by
PEDOT:PSS for Flexible and Stretchable Electronics: Modifications, Strategies, and Applications
Fan, X., Nie, W., Tsai, H., Wang, N., Huang, H., Cheng, Y., Wen, R., Ma, L., Yan, F., & Xia, Y. (2019) · Advanced Science · doi:10.1002/advs.201900813 · Cited by 1,028
Flexible Thermoelectric Materials and Generators: Challenges and Innovations
Wang, Y., Yang, L., Shi, X., Shi, X., Chen, L., Dargusch, M. S., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807916 · Cited by 751
Thermoelectric materials and applications for energy harvesting power generation
Petsagkourakis, I., Tybrandt, K., Crispin, X., Ohkubo, I., Satoh, N., & Mori, T. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1530938 · Cited by 570
Flexible thermoelectric materials and devices
Du, Y., Xu, J., Paul, B., & Eklund, P. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.07.004 · Cited by 567
Polymer Semiconductors: Synthesis, Processing, and Applications
Ding, L., Yu, Z.-D., Wang, X.-Y., Yao, Z.-F., Lu, Y., Yang, C.-Y., Wang, J.-Y., & Pei, J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00696 · Cited by 539
Flexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Thermoelectric Properties of PEDOT:PSS
Fan, Z., & Ouyang, J. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800769 · Cited by 448
Self-citationAdvances in the design and assembly of flexible thermoelectric device
Cao, T., Shi, X.-L., & Chen, Z.-G. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101003 · Cited by 387
Xu, S., Shi, X.-L., Dargusch, M., Di, C., Zou, J., & Chen, Z.-G. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100840 · Cited by 315
Polymer based thermoelectric nanocomposite materials and devices: Fabrication and characteristics
Nandihalli, N., Liu, C.-J., & Mori, T. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105186 · Cited by 293
Recent Development of Thermoelectric Polymers and Composites
Yao, H., Fan, Z., Cheng, H., Guan, X., Wang, C., Sun, K., & Ouyang, J. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700727 · Cited by 291
Self-citationPrunet, G., Pawula, F., Fleury, G., Cloutet, E., Robinson, A. J., Hadziioannou, G., & Pakdel, A. (2021) · Materials Today Physics · doi:10.1016/j.mtphys.2021.100402 · Cited by 286
Stretchable and Transparent Ionogels with High Thermoelectric Properties
Fang, Y., Cheng, H., He, H., Wang, S., Li, J., Yue, S., Zhang, L., Du, Z., & Ouyang, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004699 · Cited by 274
Self-citation
Metadata
- Authors
- Fan, Z., Li, P., Du, D., & Ouyang, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-12-12
- Volume
- 7
- Issue
- 8
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2565451571
- Cited by
- 452
- References
- 48
- FWCI
- 12.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.