The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Significantly Enhanced Thermoelectric Properties of PEDOT:PSS Films through Sequential Post‐Treatments with Common Acids and Bases
Abstract
Thermoelectric (TE) materials are important for the sustainable development because they enable the direct harvesting of low‐quality heat into electricity. Among them, conducting polymers have attracted great attention arising from their advantages, such as flexibility, nontoxicity, easy availability, and intrinsically low thermal conductivity. In this work, a novel and facile method is reported to significantly enhance the TE property of poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films through sequential post‐treatments with common acids and bases. Compared with the as‐prepared PEDOT:PSS, both the Seebeck coefficients and electrical conductivities can be remarkably enhanced after the treatments. The oxidation level, which significantly impacts the TE property of the PEDOT:PSS films, can also be well tuned by controlling the experimental conditions during the base treatment. The optimal PEDOT:PSS films can have a Seebeck coefficient of 39.2 µV K−1 and a conductivity of 2170 S cm−1 at room temperature, and the corresponding power factor is 334 µW (m−1 K−2). The enhancement in the TE properties is attributed to the synergetic effect of high charge mobility by the acid treatment and the optimal oxidation level tuned by the base treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals
Zhao, L.-D., Lo, S.-H., Zhang, Y., Sun, H., Tan, G., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2014) · Nature · doi:10.1038/nature13184 · Cited by 5,218
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P. (2013) · Nature Materials · doi:10.1038/nmat3635 · Cited by 1,688
Thermoelectric Materials, Phenomena, and Applications: A Bird's Eye View
Tritt, T. M., & Subramanian, M. A. (2006) · MRS Bulletin · doi:10.1557/mrs2006.44 · Cited by 1,515
Ouyang, J., Xu, Q., Chu, C., Yang, Y., Li, G., & Shinar, J. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.001 · Cited by 1,438
Self-citationXia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,124
Self-citationZhang, Q., Sun, Y., Xu, W., & Zhu, D. (2014) · Advanced Materials · doi:10.1002/adma.201305371 · Cited by 999
Bubnova, O., Khan, Z. U., Wang, H., Braun, S., Evans, D. R., Fabretto, M., Hojati-Talemi, P., Dagnelund, D., Arlin, J.-B., Geerts, Y. H., et al. (2014) · Nature Materials · doi:10.1038/nmat3824 · Cited by 854
Yao, Q., Chen, L., Zhang, W., Liufu, S., & Chen, X. (2010) · ACS Nano · doi:10.1021/nn1002562 · Cited by 672
Ordered Materials for Organic Electronics and Photonics
O’Neill, M., & Kelly, S. M. (2011) · Advanced Materials · doi:10.1002/adma.201002884 · Cited by 556
State of the Art of Carbon Nanotube Fibers: Opportunities and Challenges
Lu, W., Zu, M., Byun, J., Kim, B., & Chou, T. (2012) · Advanced Materials · doi:10.1002/adma.201104672 · Cited by 550
Crispin, X., Marciniak, S., Osikowicz, W., Zotti, G., van der Gon, A. W. D., Louwet, F., Fahlman, M., Groenendaal, L., De Schryver, F., & Salaneck, W. R. (2003) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10659 · Cited by 525
Zheng, X. F., Liu, C. X., Yan, Y. Y., & Wang, Q. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.053 · Cited by 515
Optimum Carrier Concentration in n‐Type PbTe Thermoelectrics
Pei, Y., Gibbs, Z. M., Gloskovskii, A., Balke, B., Zeier, W. G., & Snyder, G. J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400486 · Cited by 458
Park, T., Park, C., Kim, B., Shin, H., & Kim, E. (2013) · Energy & Environmental Science · doi:10.1039/c3ee23729j · Cited by 443
Jin Bae, E., Hun Kang, Y., Jang, K.-S., & Yun Cho, S. (2016) · Scientific Reports · doi:10.1038/srep18805 · Cited by 431
Solution processed organic thermoelectrics: towards flexible thermoelectric modules
Chen, Y., Zhao, Y., & Liang, Z. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03297g · Cited by 428
Enhanced thermoelectric properties of PEDOT:PSS nanofilms by a chemical dedoping process
Park, H., Lee, S. H., Kim, F. S., Choi, H. H., Cheong, I. W., & Kim, J. H. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14960a · Cited by 318
Thermal Conductivity and Elastic Constants of PEDOT:PSS with High Electrical Conductivity
Liu, J., Wang, X., Li, D., Coates, N. E., Segalman, R. A., & Cahill, D. G. (2015) · Macromolecules · doi:10.1021/ma502099t · Cited by 308
Highly Conductive PEDOT:PSS Treated with Formic Acid for ITO-Free Polymer Solar Cells
Mengistie, D. A., Ibrahem, M. A., Wang, P.-C., & Chu, C.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405024d · Cited by 305
Ouyang, J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404113n · Cited by 296
Self-citationCulebras, M., Gómez, C. M., & Cantarero, A. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01012d · Cited by 266
Mengistie, D. A., Chen, C.-H., Boopathi, K. M., Pranoto, F. W., Li, L.-J., & Chu, C.-W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507032e · Cited by 240
Yu, Z., Xia, Y., Du, D., & Ouyang, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00317 · Cited by 237
Self-citationShi, W., Zhao, T., Xi, J., Wang, D., & Shuai, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06584 · Cited by 209
Thermoelectric Polymers and their Elastic Aerogels
Khan, Z. U., Edberg, J., Hamedi, M. M., Gabrielsson, R., Granberg, H., Wågberg, L., Engquist, I., Berggren, M., & Crispin, X. (2016) · Advanced Materials · doi:10.1002/adma.201505364 · Cited by 199
Khan, Z. U., Bubnova, O., Jafari, M. J., Brooke, R., Liu, X., Gabrielsson, R., Ederth, T., Evans, D. R., Andreasen, J. W., Fahlman, M., et al. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01952d · Cited by 177
Xia, Y., & Ouyang, J. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300881m · Cited by 173
Self-citationMoulin, É., Cid, J., & Giuseppone, N. (2012) · Advanced Materials · doi:10.1002/adma.201201949 · Cited by 172
A facile dedoping approach for effectively tuning thermoelectricity and acidity of PEDOT:PSS films
Tsai, T.-C., Chang, H.-C., Chen, C., Huang, Y., & Whang, W. (2014) · Organic Electronics · doi:10.1016/j.orgel.2013.12.023 · Cited by 137
Experimental Studies on the Anisotropic Thermoelectric Properties of Conducting Polymer Films
Wei, Q., Mukaida, M., Kirihara, K., & Ishida, T. (2014) · ACS Macro Letters · doi:10.1021/mz500446z · Cited by 131
Xiong, J., Jiang, F., Zhou, W., Liu, C., & Xu, J. (2015) · RSC Advances · doi:10.1039/c5ra07820b · Cited by 126
Yi, C., Wilhite, A., Zhang, L., Hu, R., Chuang, S. S. C., Zheng, J., & Gong, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01960 · Cited by 117
Novel solution-processable, dedoped semiconductors for application in thermoelectric devices
Lee, S. H., Park, H., Son, W., Choi, H. H., & Kim, J. H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01839g · Cited by 114
The optimization of thermoelectric properties in a PEDOT:PSS thin film through post-treatment
Liu, S., Deng, H., Zhao, Y. F., Ren, S., & Fu, Q. (2014) · RSC Advances · doi:10.1039/c4ra09147g · Cited by 114
A facile chemical reduction approach for effectively tuning thermoelectric properties of PEDOT films
Wang, J., Cai, K., & Shen, S. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.12.007 · Cited by 107
Composition Modulation of Ag2Te Nanowires for Tunable Electrical and Thermal Properties
Yang, H., Bahk, J., Day, T. W., Mohammed, A. M. S., Min, B., Snyder, G. J., Shakouri, A., & Wu, Y. (2014) · Nano Letters · doi:10.1021/nl502551c · Cited by 92
Sulfuric acid vapor treatment for enhancing the thermoelectric properties of PEDOT:PSS thin-films
Kim, J., Jang, J. G., Hong, J., Kim, S. H., & Kwak, J. (2016) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-016-4538-x · Cited by 78
Correcting for contact geometry in Seebeck coefficient measurements of thin film devices
van Reenen, S., & Kemerink, M. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.06.018 · Cited by 73
Stepien, L., Roch, A., Schlaier, S., Dani, I., Kiriy, A., Simon, F., Lukowicz, M. V., & Leyens, C. (2015) · Energy Harvesting and Systems · doi:10.1515/ehs-2014-0060 · Cited by 60
Enhanced thermoelectric properties of PEDOT:PSS films via a novel two-step treatment
Zhang, L., Deng, H., Liu, S., Zhang, Q., Chen, F., & Fu, Q. (2015) · RSC Advances · doi:10.1039/c5ra22240k · Cited by 50
Wei, Q., Mukaida, M., Kirihara, K., Naitoh, Y., & Ishida, T. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10453 · Cited by 48
Tomlinson, E. P., Willmore, M. J., Zhu, X., Hilsmier, S. W. A., & Boudouris, B. W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b05860 · Cited by 33
Explaining the effects of processing on the electrical properties of PEDOT:PSS
van Reenen, S., Scheepers, M. M., van de Ruit, K., Bollen, D., & Kemerink, M. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.10.029 · Cited by 31
Zhu, Z., Liu, C., Jiang, Q., Shi, H., Jiang, F., Xu, J., Xiong, J., & Liu, E. (2015) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-015-3523-0 · Cited by 28
Zhu, Z., Liu, C., Jiang, Q., Shi, H., Xu, J., Jiang, F., Xiong, J., & Liu, E. (2015) · Synthetic Metals · doi:10.1016/j.synthmet.2015.08.006 · Cited by 20
Cited by
PEDOT:PSS for Flexible and Stretchable Electronics: Modifications, Strategies, and Applications
Fan, X., Nie, W., Tsai, H., Wang, N., Huang, H., Cheng, Y., Wen, R., Ma, L., Yan, F., & Xia, Y. (2019) · Advanced Science · doi:10.1002/advs.201900813 · Cited by 1,028
Flexible Thermoelectric Materials and Generators: Challenges and Innovations
Wang, Y., Yang, L., Shi, X., Shi, X., Chen, L., Dargusch, M. S., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807916 · Cited by 751
Thermoelectric materials and applications for energy harvesting power generation
Petsagkourakis, I., Tybrandt, K., Crispin, X., Ohkubo, I., Satoh, N., & Mori, T. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1530938 · Cited by 570
Flexible thermoelectric materials and devices
Du, Y., Xu, J., Paul, B., & Eklund, P. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.07.004 · Cited by 567
Polymer Semiconductors: Synthesis, Processing, and Applications
Ding, L., Yu, Z.-D., Wang, X.-Y., Yao, Z.-F., Lu, Y., Yang, C.-Y., Wang, J.-Y., & Pei, J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00696 · Cited by 539
Metadata
- Authors
- Fan, Z., Li, P., Du, D., & Ouyang, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-12-12
- Volume
- 7
- Issue
- 8
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2565451571
- Cited by
- 452
- References
- 48
- FWCI
- 12.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.