The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Tailoring Organic Cation of 2D Air‐Stable Organometal Halide Perovskites for Highly Efficient Planar Solar Cells
Abstract
2D perovskites have recently been shown to exhibit significantly improved environmental stability. Derived from their 3D analogues, 2D perovskites are formed by inserting bulky alkylammonium cations in‐between the anionic layers. However, these insulating organic spacer cations also hinder charge transport. Herein, such a 2D perovskite, (iso‐BA)2(MA)3 Pb 4 I 13, that contains short branched‐chain spacer cations (iso‐BA+) and shows a remarkable increase of optical absorption and crystallinity in comparison to the conventional linear one, n‐BA+, is designed. After applying the hot‐casting (HC) technique, all these properties are further improved. The HC (iso‐BA)2(MA)3 Pb 4 I 13 sample exhibits the best ambient stability by maintaining its initial optical absorption after storage of 840 h in an environmental chamber at 20 °C with a relative humidity of 60% without encapsulation. More importantly, the out‐of‐plane crystal orientation of (iso‐BA)2(MA)3 Pb 4 I 13 film is notably enhanced, which increases cross‐plane charge mobility. As a result, the highest power conversion efficiencies (PCEs) measured from for current density versus voltage curves afford 8.82% and 10.63% for room‐temperature and HC‐processed 2D perovskites based planar solar cells, respectively. However, the corresponding steady‐state PCEs are remarkably lower, which is presumably due to the significant hysteresis phenomena caused by low charge extraction efficiency at interfaces of C 60/2D perovskites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Optical Properties and Electronic Structure of Amorphous Germanium
Tauc, J., Grigorovici, R., & Vancu, A. (1966) · physica status solidi (b) · doi:10.1002/pssb.19660150224 · Cited by 11,071
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Self-citationThe light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Ligand-Stabilized Reduced-Dimensionality Perovskites
Quan, L. N., Yuan, M., Comin, R., Voznyy, O., Beauregard, E. M., Hoogland, S., Buin, A., Kirmani, A. R., Zhao, K., Amassian, A., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11740 · Cited by 1,436
Ponseca, C. S., Savenije, T. J., Abdellah, M., Zheng, K., Yartsev, A., Pascher, T., Harlang, T., Chabera, P., Pullerits, T., Stepanov, A., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412583t · Cited by 1,257
Self-citationPreparation and characterization of layered lead halide compounds
Calabrese, J., Jones, N. L., Harlow, R. L., Herron, N., Thorn, D. L., & Wang, Y. (1991) · Journal of the American Chemical Society · doi:10.1021/ja00006a076 · Cited by 596
A review of charge transport and recombination in polymer/fullerene organic solar cells
Pivrikas, A., Sariciftci, N. S., Juška, G., & Österbacka, R. (2007) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.791 · Cited by 578
Advances and Promises of Layered Halide Hybrid Perovskite Semiconductors
Pedesseau, L., Sapori, D., Traore, B., Robles, R., Fang, H.-H., Loi, M. A., Tsai, H., Nie, W., Blancon, J.-C., Neukirch, A., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b05944 · Cited by 439
Recent Advances in Improving the Stability of Perovskite Solar Cells
Tiep, N. H., Ku, Z., & Fan, H. J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501420 · Cited by 356
Nanostructuring Mixed‐Dimensional Perovskites: A Route Toward Tunable, Efficient Photovoltaics
Koh, T. M., Shanmugam, V., Schlipf, J., Oesinghaus, L., Müller‐Buschbaum, P., Ramakrishnan, N., Swamy, V., Mathews, N., Boix, P. P., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201506141 · Cited by 271
Chen, Y., He, M., Peng, J., Sun, Y., & Liang, Z. (2016) · Advanced Science · doi:10.1002/advs.201500392 · Cited by 249
Self-citationSafdari, M., Svensson, P. H., Hoang, M. T., Oh, I., Kloo, L., & Gardner, J. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05055g · Cited by 210
Corani, A., Li, M.-H., Shen, P., Chen, P., Guo, T., Nahhas, A. E., Zheng, K., Yartsev, A. P., Sundström, V., & Ponseca, C. S. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00238 · Cited by 115
Self-citation
Cited by
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Dimensional tailoring of hybrid perovskites for photovoltaics
Grancini, G., & Nazeeruddin, M. K. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0065-0 · Cited by 978
2D Ruddlesden–Popper Perovskites for Optoelectronics
Chen, Y., Sun, Y., Peng, J., Tang, J., Zheng, K., & Liang, Z. (2018) · Advanced Materials · doi:10.1002/adma.201703487 · Cited by 892
Self-citation
Metadata
- Authors
- Chen, Y., Sun, Y., Peng, J., Zhang, W., Su, X., Zheng, K., Pullerits, T., & Liang, Z.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-05-16
- Volume
- 7
- Issue
- 18
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2614685075
- Cited by
- 358
- References
- 21
- FWCI
- 21.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.