The DOI matches its Crossref record; 268 of the 268 references it cites were found in a registry or an index.
Interfaces in Perovskite Solar Cells
Open accessAbstract
Rapid improvement in photoconversion efficiency (PCE) of solution processable organometallic hybrid halide based perovskite solar cells (PSCs) have taken the photovoltaic (PV) community with a surprise and has extended their application in other electronic devices such as light emitting diodes, photo detectors and batteries. Together with efforts to push the PCE of PSCs to record values >22% – now at par with that of crystalline silicon solar cells – origin of their PV action and underlying physical processes are also deeply investigated worldwide in diverse device configurations. A typical PSC consists of a perovskite film sandwiched between an electron and a hole selective contact thereby creating ESC/perovskite and perovskite/HSC interfaces, respectively. The selective contacts and their interfaces determine properties of perovskite layer and also control the performance, origin of PV action, open circuit voltage, device stability, and hysteresis in PSCs. Herein, we define ideal charge selective contacts, and provide an overview on how the choice of interfacing materials impacts charge accumulation, transport, transfer/recombination, band‐alignment, and electrical stability in PSCs. We then discuss device related considerations such as morphology of the selective contacts (planar or mesoporous), energetics and electrical properties (insulating and conducting), and its chemical properties (organic vs inorganic). Finally, the outlook highlights key challenges and future directions for a commercially viable perovskite based PV technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–268 of 268
Review of materials and manufacturing options for large area flexible dye solar cells
Hashmi, G., Miettunen, K., Peltola, T., Halme, J., Asghar, I., Aitola, K., Toivola, M., & Lund, P. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.06.004 · Cited by 210
Wang, J., Qin, M., Tao, H., Ke, W., Chen, Z., Wan, J., Qin, P., Xiong, L., Lei, H., Yu, H., et al. (2015) · Applied Physics Letters · doi:10.1063/1.4916345 · Cited by 209
Hu, M., Liu, L., Mei, A., Yang, Y., Liu, T., & Han, H. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03741c · Cited by 207
Overcoming the Interface Losses in Planar Heterojunction Perovskite‐Based Solar Cells
Hou, Y., Chen, W., Baran, D., Stubhan, T., Luechinger, N. A., Hartmeier, B., Richter, M., Min, J., Chen, S., Quiroz, C. O. R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504168 · Cited by 206
Guillén, E., Ramos, F. J., Anta, J. A., & Ahmad, S. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5069076 · Cited by 200
Dong, J., Zhao, Y., Shi, J., Wei, H., Xiao, J., Xu, X., Luo, J., Xu, J. P., Li, D., Luo, Y., et al. (2014) · Chemical Communications · doi:10.1039/c4cc04908j · Cited by 197
Synthesis of oriented TiO2 nanocones with fast charge transfer for perovskite solar cells
Zhong, D., Cai, B., Wang, X., Yang, Z., Xing, Y., Miao, S., Zhang, W.-H., & Li, C. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.014 · Cited by 196
Gottesman, R., Lopez-Varo, P., Gouda, L., Jimenez-Tejada, J. A., Hu, J., Tirosh, S., Zaban, A., & Bisquert, J. (2016) · Chem · doi:10.1016/j.chempr.2016.10.002 · Cited by 195
Fabregat-Santiago, F., García-Cañadas, J., Palomares, E., Clifford, J. N., Haque, S. A., Durrant, J. R., Garcia-Belmonte, G., & Bisquert, J. (2004) · Journal of Applied Physics · doi:10.1063/1.1812588 · Cited by 193
Self-citationYang, Y., Xiao, J., Wei, H., Zhu, L., Li, D., Luo, Y., Wu, H., & Meng, Q. (2014) · RSC Adv. · doi:10.1039/c4ra09519g · Cited by 191
Surface Engineering of ZnO Thin Film for High Efficiency Planar Perovskite Solar Cells
Tseng, Z.-L., Chiang, C.-H., & Wu, C.-G. (2015) · Scientific Reports · doi:10.1038/srep13211 · Cited by 191
Han, G. S., Chung, H. S., Kim, B. J., Kim, D. H., Lee, J. W., Swain, B. S., Mahmood, K., Yoo, J. S., Park, N.-G., Lee, J. H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta03684k · Cited by 185
Insights into Planar CH3NH3PbI3 Perovskite Solar Cells Using Impedance Spectroscopy
Pascoe, A. R., Duffy, N. W., Scully, A. D., Huang, F., & Cheng, Y.-B. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp509896u · Cited by 185
Mali, S. S., Shim, C. S., Park, H. K., Heo, J., Patil, P. S., & Hong, C. K. (2015) · Chemistry of Materials · doi:10.1021/cm504558g · Cited by 182
Hydrothermal synthesis of organometal halide perovskites for Li-ion batteries
Xia, H.-R., Sun, W.-T., & Peng, L.-M. (2015) · Chemical Communications · doi:10.1039/c5cc05053g · Cited by 178
Procedures and Practices for Evaluating Thin‐Film Solar Cell Stability
Roesch, R., Faber, T., von Hauff, E., Brown, T. M., Lira‐Cantu, M., & Hoppe, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501407 · Cited by 176
Fabrication of metal-oxide-free CH3NH3PbI3perovskite solar cells processed at low temperature
Ryu, S., Seo, J., Shin, S. S., Kim, Y. C., Jeon, N. J., Noh, J. H., & Seok, S. I. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00011d · Cited by 173
Highly efficient planar perovskite solar cells with a TiO2/ZnO electron transport bilayer
Xu, X., Zhang, H., Shi, J., Dong, J., Luo, Y., Li, D., & Meng, Q. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04239a · Cited by 171
Effects of Seed Layer on Growth of ZnO Nanorod and Performance of Perovskite Solar Cell
Son, D.-Y., Bae, K.-H., Kim, H.-S., & Park, N.-G. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b03276 · Cited by 169
The size effect of TiO2 nanoparticles on a printable mesoscopic perovskite solar cell
Yang, Y., Ri, K., Mei, A., Liu, L., Hu, M., Liu, T., Li, X., & Han, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta07030e · Cited by 168
Morphology control of the perovskite films for efficient solar cells
Zheng, L., Zhang, D., Ma, Y., Lu, Z., Chen, Z., Wang, S., Xiao, L., & Gong, Q. (2015) · Dalton Transactions · doi:10.1039/c4dt03869j · Cited by 168
Progress in emerging solution-processed thin film solar cells – Part I: Polymer solar cells
Wang, Q., Xie, Y., Soltani-Kordshuli, F., & Eslamian, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.063 · Cited by 164
Highly efficient, flexible, indium-free perovskite solar cells employing metallic substrates
Troughton, J., Bryant, D., Wojciechowski, K., Carnie, M. J., Snaith, H., Worsley, D. A., & Watson, T. M. (2015) · J. Mater. Chem. A · doi:10.1039/c5ta01755f · Cited by 160
Chandiran, A. K., Sauvage, F., Casas‐Cabanas, M., Comte, P., Zakeeruddin, S. M., & Grätzel, M. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp106058c · Cited by 156
Niobium Doping Effects on TiO2 Mesoscopic Electron Transport Layer‐Based Perovskite Solar Cells
Kim, D. H., Han, G. S., Seong, W. M., Lee, J., Kim, B. J., Park, N., Hong, K. S., Lee, S., & Jung, H. S. (2015) · ChemSusChem · doi:10.1002/cssc.201403478 · Cited by 152
Electron Diffusion Length in Mesoporous Nanocrystalline TiO2 Photoelectrodes during Water Oxidation
Leng, W., Barnes, P. R. F., Juozapavicius, M., O’Regan, B. C., & Durrant, J. R. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz100051q · Cited by 147
Modeling low cost hybrid tandem photovoltaics with the potential for efficiencies exceeding 20%
Beiley, Z. M., & McGehee, M. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee23073a · Cited by 146
Unraveling the Reasons for Efficiency Loss in Perovskite Solar Cells
Lee, Y. H., Luo, J., Humphry‐Baker, R., Gao, P., Grätzel, M., & Nazeeruddin, M. K. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501024 · Cited by 145
Qiu, W., Paetzold, U. W., Gehlhaar, R., Smirnov, V., Boyen, H. ‐., Tait, J. G., Conings, B., Zhang, W., Nielsen, C. B. O., McCulloch, I. A., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07515g · Cited by 142
Temperature-dependent hysteresis effects in perovskite-based solar cells
Ono, L. K., Raga, S. R., Wang, S., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04969a · Cited by 141
Zhang, J., Barboux, P., & Pauporté, T. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400932 · Cited by 130
Advancements in all-solid-state hybrid solar cells based on organometal halide perovskites
Shi, S., Li, Y., Li, X., & Wang, H. (2015) · Materials Horizons · doi:10.1039/c4mh00236a · Cited by 124
Tin oxide as a photoanode for dye-sensitised solar cells: Current progress and future challenges
Wali, Q., Fakharuddin, A., & Jose, R. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.037 · Cited by 121
Self-citationImproved Hole Interfacial Layer for Planar Perovskite Solar Cells with Efficiency Exceeding 15%
Wang, Z., Li, M., Yuan, D.-X., Shi, X., Ma, H., & Liao, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01330 · Cited by 121
A–D–A-type S,N-heteropentacene-based hole transport materials for dopant-free perovskite solar cells
Steck, C., Franckevičius, M., Zakeeruddin, S. M., Mishra, A., Bäuerle, P., & Grätzel, M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03865k · Cited by 113
Tavakoli, M. M., Lin, Q., Leung, S., Lui, G. C., Lu, H. F., Li, L., Xiang, B., & Fan, Z. (2016) · Nanoscale · doi:10.1039/c5nr08836d · Cited by 111
Post modification of perovskite sensitized solar cells by aluminum oxide for enhanced performance
Li, W., Li, J., Wang, L., et al. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12240a · Cited by 108
García-Belmonte, G., & Bisquert, J. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00293 · Cited by 104
Manseki, K., Ikeya, T., Tamura, A., et al. (2014) · RSC Advances · doi:10.1039/c3ra47870j · Cited by 101
Low temperature processing of flexible planar perovskite solar cells with efficiency over 10%
Dkhissi, Y., Huang, F., Rubanov, S., Xiao, M., Bach, U., Spiccia, L., Caruso, R. A., & Cheng, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.104 · Cited by 98
Xu, Y., Shi, J., Lv, S., Zhu, L., Dong, J., Wu, H., Xiao, Y., Luo, Y., Wang, S., Li, D., et al. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5001773 · Cited by 97
Photodecomposition and Morphology Evolution of Organometal Halide Perovskite Solar Cells
Matsumoto, F., Vorpahl, S. M., Banks, J. Q., Sengupta, E., & Ginger, D. S. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06269 · Cited by 96
Flexible fiber/wire-shaped solar cells in progress: properties, materials, and designs
Peng, M., & Zou, D. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03731j · Cited by 94
Elastic perovskite solar cells
Deng, J., Qiu, L., Lü, X., Yang, Z., Guan, G., Zhang, Z., & Peng, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06156c · Cited by 91
Core/Shell Structured TiO2/CdS Electrode to Enhance the Light Stability of Perovskite Solar Cells
Hwang, I., Baek, M., & Yong, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09442 · Cited by 91
Double-layered ZnO nanostructures for efficient perovskite solar cells
Mahmood, K., Swain, B. S., & Amassian, A. (2014) · Nanoscale · doi:10.1039/c4nr04383a · Cited by 90
Recent advances in flexible perovskite solar cells
Susrutha, B., Giribabu, L., & Singh, S. P. (2015) · Chemical Communications · doi:10.1039/c5cc03666f · Cited by 89
Zhang, F., Yang, X., Cheng, M., Li, J., Wang, W., Wang, H., & Sun, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07507f · Cited by 89
Efficient fiber-shaped perovskite photovoltaics using silver nanowires as top electrode
Lee, M., Ko, Y., & Jun, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02779a · Cited by 85
Chen, S., Hou, Y., Chen, H., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600132 · Cited by 85
He, S., Qiu, L., Fang, X., Guan, G., Chen, P., Zhang, Z., & Peng, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01532d · Cited by 80
Lee, M., Jo, Y., Kim, D. S., Jeong, H. Y., & Jun, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03240g · Cited by 79
Influence of Interface Morphology on Hysteresis in Vapor‐Deposited Perovskite Solar Cells
Patel, J. B., Wong‐Leung, J., van Reenen, S., Sakai, N., Wang, J. T. W., Parrott, E. S., Liu, M., Snaith, H. J., Herz, L. M., & Johnston, M. B. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600470 · Cited by 77
Ga3+ and Y3+ Cationic Substitution in Mesoporous TiO2 Photoanodes for Photovoltaic Applications
Chandiran, A. K., Sauvage, F., Etgar, L., & Grätzel, M. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1121068 · Cited by 74
Interface engineering of perovskite solar cells with PEO for improved performance
Dong, H., Li, Y., Wang, S. F., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00407a · Cited by 64
Influence of the substrate on the bulk properties of hybrid lead halide perovskite films
Climent‐Pascual, E., Hames, B. C., Moreno-Ramírez, J. S., Álvarez, A. L., Juarez-Perez, E. J., Mas-Marzá, E., Mora‐Seró, I., de Andrés, A., & Coya, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08695k · Cited by 64
Switching behavior of epitaxial perovskite manganite thin films
Oshima, H., Miyano, K., Konishi, Y., Kawasaki, M., & Tokura, Y. (1999) · Applied Physics Letters · doi:10.1063/1.124729 · Cited by 63
Probing Molecular and Crystalline Orientation in Solution‐Processed Perovskite Solar Cells
Huang, W., Huang, F., Gann, E. H., Cheng, Y., & McNeill, C. R. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502553 · Cited by 61
Research Update: Behind the high efficiency of hybrid perovskite solar cells
Fakharuddin, A., Rossi, F. D., Watson, T., Schmidt‐Mende, L., & Jose, R. (2016) · APL Materials · doi:10.1063/1.4962143 · Cited by 58
Self-citationWu, W., Huang, F., Chen, D., Cheng, Y., & Caruso, R. A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502027 · Cited by 56
Mahmood, K., Swain, B. S., & Amassian, A. (2015) · Nanoscale · doi:10.1039/c5nr02874d · Cited by 53
Hole-transport material-free perovskite-based solar cells
Etgar, L. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.174 · Cited by 44
Liu, Y., Ji, S., Li, S., He, W., Wang, K., Hu, H., & Ye, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03693c · Cited by 43
Evidence of band bending induced by hole trapping at MAPbI 3 perovskite/metal interface
Chen, Y.-F., Tsai, Y., Bassani, D. M., Clerc, R., Forgács, D., Bolink, H. J., Wussler, M., Jaegermann, W., Wantz, G., & Hirsch, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08979h · Cited by 38
Maximum Efficiency and Open-Circuit Voltage of Perovskite Solar Cells
Tress, W. (2016) · Springer eBooks · doi:10.1007/978-3-319-35114-8_3 · Cited by 35
A checklist for photovoltaic research
(2015) · Nature Materials · doi:10.1038/nmat4473 · Cited by 32
Temperature-Dependent Electric Field Poling Effects in CH3NH3PbI3 Optoelectronic Devices
Zhang, C., Sun, D., Liu, X., Sheng, C.-X., & Vardeny, Z. V. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00353 · Cited by 14
Fu, Q., Tang, X., Tan, L., et al. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b04625 · Cited by 8
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Halide Perovskites: Is It All about the Interfaces?
Schulz, P., Cahen, D., & Kahn, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00558 · Cited by 558
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Interface and Defect Engineering for Metal Halide Perovskite Optoelectronic Devices
Han, T., Tan, S., Xue, J., Meng, L., Lee, J., & Yang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803515 · Cited by 481
Metadata
- Authors
- Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-08-11
- Volume
- 7
- Issue
- 22
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2744991675
- Cited by
- 349
- References
- 268
- FWCI
- 19.69
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.