The DOI matches its Crossref record; 135 of the 135 references it cites were found in a registry or an index.
Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Abstract
Organic‐inorganic halide perovskite materials have become a shining star in the photovoltaic field due to their unique properties, such as high absorption coefficient, optimal bandgap, and high defect tolerance, which also lead to the breathtaking increase in power conversion efficiency from 3.8% to over 22% in just seven years. Although the highest efficiency was obtained from the TiO 2 mesoporous structure, there are increasing studies focusing on the planar structure device due to its processibility for large‐scale production. In particular, the planar p‐i‐n structure has attracted increasing attention on account of its tremendous advantages in, among other things, eliminating hysteresis alongside a competitive certified efficiency of over 20%. Crucial for the device performance enhancement has been the interface engineering for the past few years, especially for such planar p‐i‐n devices. The interface engineering aims to optimize device properties, such as charge transfer, defect passivation, band alignment, etc. Herein, recent progress on the interface engineering of planar p‐i‐n structure devices is reviewed. This review is mainly focused on the interface design between each layer in p‐i‐n structure devices, as well as grain boundaries, which are the interfaces between polycrystalline perovskite domains. Promising research directions are also suggested for further improvements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Cited by
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Kang, D., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201805214 · Cited by 498
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Preventing phase segregation in mixed-halide perovskites: a perspective
Knight, A. J., & Herz, L. M. (2020) · Energy & Environmental Science · doi:10.1039/d0ee00788a · Cited by 393
Yin, X., Song, Z., Li, Z., & Tang, W. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02337j · Cited by 388
New Strategies for Defect Passivation in High‐Efficiency Perovskite Solar Cells
Akin, S., Arora, N., Zakeeruddin, S. M., Grätzel, M., Friend, R. H., & Dar, M. I. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903090 · Cited by 352
Wang, Y., Chen, W., Wang, L., Tu, B., Chen, T., Liu, B., Yang, K., Koh, C. W., Zhang, X., Sun, H., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902781 · Cited by 351
High Electrical Conductivity 2D MXene Serves as Additive of Perovskite for Efficient Solar Cells
Guo, Z., Gao, L., Xu, Z., Teo, S., Zhang, C., Kamata, Y., Hayase, S., & Ma, T. (2018) · Small · doi:10.1002/smll.201802738 · Cited by 335
Cao, Q., Li, Y., Zhang, H., Yang, J., Han, J., Xu, T., Wang, S., Wang, Z., Gao, B., Zhao, J., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg0633 · Cited by 322
Fundamental Understanding of Photocurrent Hysteresis in Perovskite Solar Cells
Liu, P., Wang, W., Liu, S., Yang, H., & Shao, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803017 · Cited by 321
Harnessing MOF materials in photovoltaic devices: recent advances, challenges, and perspectives
Chueh, C.-C., Chen, C.-I., Su, Y.-A., Konnerth, H., Gu, Y.-J., Kung, C.-W., & Wu, K. C.-W. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03595h · Cited by 310
Dong, Q., Zhu, C., Chen, M., Jiang, C., Guo, J., Feng, Y., Dai, Z., Yadavalli, S. K., Hu, M., Cao, X., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-21292-3 · Cited by 299
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Zhou, Q., Liang, L., Hu, J., Cao, B., Yang, L., Wu, T., Li, X., Zhang, B., & Gao, P. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802595 · Cited by 294
Research Direction toward Scalable, Stable, and High Efficiency Perovskite Solar Cells
Park, N. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903106 · Cited by 268
Najafi, L., Taheri, B., Martín-García, B., Bellani, S., Di Girolamo, D., Agresti, A., Oropesa-Nuñez, R., Pescetelli, S., Vesce, L., Calabrò, E., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b05514 · Cited by 264
Operationally stable perovskite solar modules enabled by vapor-phase fluoride treatment
Zhao, X., Zhang, P., Liu, T., Tian, B., Jiang, Y., Zhang, J., Tang, Y., Li, B., Xue, M., Zhang, W., et al. (2024) · Science · doi:10.1126/science.adn9453 · Cited by 152
Metadata
- Authors
- Bai, Y., Meng, X., & Yang, S.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-11-07
- Volume
- 8
- Issue
- 5
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2767686158
- Cited by
- 418
- References
- 135
- FWCI
- 21.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.