The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
3D Amorphous Carbon with Controlled Porous and Disordered Structures as a High‐Rate Anode Material for Sodium‐Ion Batteries
Abstract
Sodium‐ion batteries (SIBs) have a promising application prospect for energy storage systems due to the abundant resource. Amorphous carbon with high electronic conductivity and high surface area is likely to be the most promising anode material for SIBs. However, the rate capability of amorphous carbon in SIBs is still a big challenge because of the sluggish kinetics of Na+ ions. Herein, a three‐dimensional amorphous carbon (3DAC) with controlled porous and disordered structures is synthesized via a facile NaCl template‐assisted method. Combination of open porous structures of 3DAC, the increased disordered structures can not only facilitate the diffusion of Na+ ions but also enhance the reversible capacity of Na storage. When applied as anode materials for SIBs, 3DAC exhibits excellent rate capability (66 mA h g−1 at 9.6 A g−1) and high reversible capacity (280 mA h g−1 at a low current density of 0.03 A g−1). Moreover, the controlled porous structures by the NaCl template method provide an appropriate specific surface area, which contributes to a relatively high initial Coulombic efficiency of 75%. Additionally, the high‐rate 3DAC material is prepared via a green approach originating from low‐cost pitch and NaCl template, demonstrating an appealing development of carbon anode materials for SIBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Interpretation of Raman spectra of disordered and amorphous carbon
Ferrari, A. C., & Robertson, J. (2000) · Physical Review B · doi:10.1103/physrevb.61.14095 · Cited by 15,651
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Pseudocapacitive Contributions to Electrochemical Energy Storage in TiO2 (Anatase) Nanoparticles
Wang, J., Polleux, J., Lim, J., & Dunn, B. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp074464w · Cited by 5,333
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Expanded graphite as superior anode for sodium-ion batteries
Wen, Y., He, K., Zhu, Y., Han, F., Xu, Y., Matsuda, I., Ishii, Y., Cumings, J., & Wang, C. (2014) · Nature Communications · doi:10.1038/ncomms5033 · Cited by 1,894
Cited by
Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902852 · Cited by 643
Reconfiguring Hard Carbons with Emerging Sodium‐Ion Batteries: A Perspective
Chu, Y., Zhang, J., Zhang, Y., Li, Q., Jia, Y., Dong, X., Xiao, J., Tao, Y., & Yang, Q. (2023) · Advanced Materials · doi:10.1002/adma.202212186 · Cited by 602
Exploring competitive features of stationary sodium ion batteries for electrochemical energy storage
Liu, T., Zhang, Y., Jiang, Z., Zeng, X., Ji, J., Li, Z., Gao, X., Sun, M., Lin, Z., Ling, M., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03727b · Cited by 592
A Flexible Microwave Shield with Tunable Frequency‐Transmission and Electromagnetic Compatibility
Lv, H., Yang, Z., Ong, S. J. H., Wei, C., Liao, H., Xi, S., Du, Y., Ji, G., & Xu, Z. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900163 · Cited by 398
Yang, H., Xu, R., Yao, Y., Ye, S., Zhou, X., & Yu, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809195 · Cited by 390
Self-citationSun, F., Wang, H., Qu, Z., Wang, K., Wang, L., Gao, J., Gao, J., Liu, S., & Lu, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002981 · Cited by 390
Effect of Intrinsic Defects of Carbon Materials on the Sodium Storage Performance
Guo, R., Lv, C., Xu, W., Sun, J., Zhu, Y., Yang, X., Li, J., Sun, J., Zhang, L., & Yang, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903652 · Cited by 369
Carbon Anode Materials: A Detailed Comparison between Na‐ion and K‐ion Batteries
Zhang, L., Wang, W. (., Lu, S., & Xiang, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003640 · Cited by 345
Na 3 V 2 (PO 4 ) 3 : an advanced cathode for sodium-ion batteries
Zhang, X., Rui, X., Chen, D., Tan, H., Yang, D., Huang, S., & Yu, Y. (2019) · Nanoscale · doi:10.1039/c8nr09391a · Cited by 336
Self-citationXu, R., Yi, Z., Song, M., Chen, J., Wei, X., Su, F., Dai, L., Sun, G., Yang, F., Xie, L., et al. (2023) · Carbon · doi:10.1016/j.carbon.2023.02.004 · Cited by 323
Hou, B., Wang, Y., Ning, Q., Li, W., Xi, X., Yang, X., Liang, H., Feng, X., & Wu, X. (2019) · Advanced Materials · doi:10.1002/adma.201903125 · Cited by 321
Defect‐Rich Soft Carbon Porous Nanosheets for Fast and High‐Capacity Sodium‐Ion Storage
Yao, X., Ke, Y., Ren, W., Wang, X., Xiong, F., Yang, W., Qin, M., Li, Q., & Mai, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803260 · Cited by 320
Hard carbons for sodium-ion batteries and beyond
Xie, F., Xu, Z., Guo, Z., & Titirici, M.-M. (2020) · Progress in Energy · doi:10.1088/2516-1083/aba5f5 · Cited by 319
N/O Dual‐Doped Environment‐Friendly Hard Carbon as Advanced Anode for Potassium‐Ion Batteries
Cui, R. C., Xu, B., Dong, H. J., Yang, C. C., & Jiang, Q. (2020) · Advanced Science · doi:10.1002/advs.201902547 · Cited by 302
Hu, X., Sun, X., Yoo, S. J., Evanko, B., Fan, F., Cai, S., Zheng, C., Hu, W., & Stucky, G. D. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.11.081 · Cited by 292
Tang, Z., Zhou, S., Huang, Y., Wang, H., Zhang, R., Wang, Q., Sun, D., Tang, Y., & Wang, H. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00178-y · Cited by 275
Electrode–Electrolyte Interfacial Chemistry Modulation for Ultra‐High Rate Sodium‐Ion Batteries
Tang, Z., Wang, H., Wu, P., Zhou, S., Huang, Y., Zhang, R., Sun, D., Tang, Y., & Wang, H. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202200475 · Cited by 263
Zhang, T., & Ran, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010041 · Cited by 260
Chen, Z., He, X., Li, Q., Yang, H., Liu, Y., Wu, L., Liu, Z., Hu, B., & Wang, X. (2022) · Journal of Environmental Sciences · doi:10.1016/j.jes.2021.10.003 · Cited by 56
Thileep Kumar, K., Raghu, S., & Shanmugharaj, A. M. (2022) · Nanoscale · doi:10.1039/d1nr07183a · Cited by 18
Metadata
- Authors
- Lu, P., Sun, Y., Xiang, H., Liang, X., & Yu, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-12-04
- Volume
- 8
- Issue
- 8
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2771183572
- Cited by
- 691
- References
- 49
- FWCI
- 28.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.