The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
3D Amorphous Carbon with Controlled Porous and Disordered Structures as a High‐Rate Anode Material for Sodium‐Ion Batteries
Abstract
Sodium‐ion batteries (SIBs) have a promising application prospect for energy storage systems due to the abundant resource. Amorphous carbon with high electronic conductivity and high surface area is likely to be the most promising anode material for SIBs. However, the rate capability of amorphous carbon in SIBs is still a big challenge because of the sluggish kinetics of Na+ ions. Herein, a three‐dimensional amorphous carbon (3DAC) with controlled porous and disordered structures is synthesized via a facile NaCl template‐assisted method. Combination of open porous structures of 3DAC, the increased disordered structures can not only facilitate the diffusion of Na+ ions but also enhance the reversible capacity of Na storage. When applied as anode materials for SIBs, 3DAC exhibits excellent rate capability (66 mA h g−1 at 9.6 A g−1) and high reversible capacity (280 mA h g−1 at a low current density of 0.03 A g−1). Moreover, the controlled porous structures by the NaCl template method provide an appropriate specific surface area, which contributes to a relatively high initial Coulombic efficiency of 75%. Additionally, the high‐rate 3DAC material is prepared via a green approach originating from low‐cost pitch and NaCl template, demonstrating an appealing development of carbon anode materials for SIBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Interpretation of Raman spectra of disordered and amorphous carbon
Ferrari, A. C., & Robertson, J. (2000) · Physical Review B · doi:10.1103/physrevb.61.14095 · Cited by 15,651
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Pseudocapacitive Contributions to Electrochemical Energy Storage in TiO2 (Anatase) Nanoparticles
Wang, J., Polleux, J., Lim, J., & Dunn, B. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp074464w · Cited by 5,333
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Expanded graphite as superior anode for sodium-ion batteries
Wen, Y., He, K., Zhu, Y., Han, F., Xu, Y., Matsuda, I., Ishii, Y., Cumings, J., & Wang, C. (2014) · Nature Communications · doi:10.1038/ncomms5033 · Cited by 1,894
The Mechanisms of Lithium and Sodium Insertion in Carbon Materials
Stevens, D. A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379565 · Cited by 1,499
Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance
Chao, D., Zhu, C., Yang, P., Xia, X., Liu, J., Wang, J., Fan, X., Savilov, S. V., Lin, J., Fan, H. J., et al. (2016) · Nature Communications · doi:10.1038/ncomms12122 · Cited by 1,447
MoS2/Graphene Composite Paper for Sodium-Ion Battery Electrodes
David, L., Bhandavat, R., & Singh, G. (2014) · ACS Nano · doi:10.1021/nn406156b · Cited by 1,212
Tarascon, J.-M. (2010) · Nature Chemistry · doi:10.1038/nchem.680 · Cited by 1,157
New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon
Bommier, C., Surta, T. W., Dolgos, M., & Ji, X. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01969 · Cited by 998
Li, Y., Hu, Y., Titirici, M., Chen, L., & Huang, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600659 · Cited by 998
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
Chao, D., Liang, P., Chen, Z., Bai, L., Shen, H., Liu, X., Xia, X., Zhao, Y., Savilov, S. V., Lin, J., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b05566 · Cited by 973
Xu, Y., Zhu, Y., Liu, Y., & Wang, C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200346 · Cited by 847
High-Performance Sodium-Ion Pseudocapacitors Based on Hierarchically Porous Nanowire Composites
Chen, Z., Augustyn, V., Jia, X., Xiao, Q., Dunn, B., & Lu, Y. (2012) · ACS Nano · doi:10.1021/nn300920e · Cited by 772
Yang, J., Zhou, X., Wu, D., Zhao, X., & Zhou, Z. (2017) · Advanced Materials · doi:10.1002/adma.201604108 · Cited by 755
Biomass derived hard carbon used as a high performance anode material for sodium ion batteries
Hong, K.-L., Qie, L., Zeng, R., Yi, Z.-Q., Zhang, W., Wang, D., Yin, W., Wu, C., Fan, Q.-J., Zhang, W.-X., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02068e · Cited by 737
Electrochemical intercalation of sodium in graphite
GE, P. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90351-7 · Cited by 726
Ultrasmall Sn Nanoparticles Embedded in Carbon as High‐Performance Anode for Sodium‐Ion Batteries
Liu, Y., Zhang, N., Jiao, L., Tao, Z., & Chen, J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402943 · Cited by 581
Nanocarbon Networks for Advanced Rechargeable Lithium Batteries
Xin, S., Guo, Y.-G., & Wan, L.-J. (2012) · Accounts of Chemical Research · doi:10.1021/ar300094m · Cited by 549
Wenzel, S., Hara, T., Janek, J., & Adelhelm, P. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01744f · Cited by 544
Li, W., Hu, S., Luo, X., Li, Z., Sun, X., Li, M., Liu, F., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605820 · Cited by 536
Self-citationWang, S., Xia, L., Yu, L., Zhang, L., Wang, H., & Lou, X. W. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201502217 · Cited by 527
Pan, H., Lu, X., Yu, X., Hu, Y., Li, H., Yang, X., & Chen, L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300139 · Cited by 516
Cao, B., Liu, H., Xu, B., Lei, Y., Chen, X., & Song, H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00950f · Cited by 457
A superior low-cost amorphous carbon anode made from pitch and lignin for sodium-ion batteries
Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08601a · Cited by 447
Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries
Xiao, L., Cao, Y., Henderson, W. A., Sushko, M. L., Shao, Y., Xiao, J., Wang, W., Engelhard, M. H., Nie, Z., & Liu, J. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.10.034 · Cited by 415
Pitch-derived amorphous carbon as high performance anode for sodium-ion batteries
Li, Y., Mu, L., Hu, Y.-S., Li, H., Chen, L., & Huang, X. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.10.003 · Cited by 409
Yan, Y., Yin, Y., Guo, Y., & Wan, L. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301584 · Cited by 408
Peanut shell derived hard carbon as ultralong cycling anodes for lithium and sodium batteries
Lv, W., Wen, F., Xiang, J., Zhao, J., Li, L., Wang, L., Liu, Z., & Tian, Y. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.059 · Cited by 330
Zhang, X., Zhu, G., Wang, M., Li, J., Lu, T., & Pan, L. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.057 · Cited by 318
Jiang, Q., Zhang, Z., Yin, S., Guo, Z., Wang, S., & Feng, C. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.03.204 · Cited by 281
Electrochemically Expandable Soft Carbon as Anodes for Na-Ion Batteries
Luo, W., Jian, Z., Xing, Z., Wang, W., Bommier, C., Lerner, M. M., & Ji, X. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00329 · Cited by 270
Biomass derived hierarchical porous carbons as high-performance anodes for sodium-ion batteries
Wang, H., Yu, W., Shi, J., Mao, N., Chen, S., & Liu, W. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2015.12.002 · Cited by 265
Kelp-derived hard carbons as advanced anode materials for sodium-ion batteries
Wang, P., Zhu, X., Wang, Q., Xu, X., Zhou, X., & Bao, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00639j · Cited by 196
Li, D., Zhang, L., Chen, H., Wang, J., Ding, L.-X., Wang, S., Ashman, P. J., & Wang, H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02139e · Cited by 179
David, L., & Singh, G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5080847 · Cited by 178
Spherical Carbon as a New High-Rate Anode for Sodium-ion Batteries
Pol, V. G., Lee, E., Zhou, D., et al. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.01.132 · Cited by 151
Bio-derived hierarchically macro-meso-micro porous carbon anode for lithium/sodium ion batteries
Elizabeth, I., Singh, B. P., Trikha, S., & Gopukumar, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.106 · Cited by 145
Zhu, S., Li, J., Ma, L., Guo, L., Li, Q., He, C., Liu, E., He, F., Shi, C., & Zhao, N. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02386 · Cited by 104
Yuan, Z., Si, L., & Zhu, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta07223a · Cited by 102
Qu, Y., Zhang, Z., Du, K., Chen, W., Lai, Y., Liu, Y., & Li, J. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.029 · Cited by 88
Hydrogen-enriched porous carbon nanosheets with high sodium storage capacity
Yoon, D., Kim, D., Chung, K. Y., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.11.009 · Cited by 81
Jiang, Y., Yao, Y., Shi, J., Zeng, L., Gu, L., & Yu, Y. M. (2016) · ChemNanoMat · doi:10.1002/cnma.201600111 · Cited by 43
Self-citation
Cited by
Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902852 · Cited by 643
Reconfiguring Hard Carbons with Emerging Sodium‐Ion Batteries: A Perspective
Chu, Y., Zhang, J., Zhang, Y., Li, Q., Jia, Y., Dong, X., Xiao, J., Tao, Y., & Yang, Q. (2023) · Advanced Materials · doi:10.1002/adma.202212186 · Cited by 602
Exploring competitive features of stationary sodium ion batteries for electrochemical energy storage
Liu, T., Zhang, Y., Jiang, Z., Zeng, X., Ji, J., Li, Z., Gao, X., Sun, M., Lin, Z., Ling, M., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03727b · Cited by 592
A Flexible Microwave Shield with Tunable Frequency‐Transmission and Electromagnetic Compatibility
Lv, H., Yang, Z., Ong, S. J. H., Wei, C., Liao, H., Xi, S., Du, Y., Ji, G., & Xu, Z. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900163 · Cited by 398
Yang, H., Xu, R., Yao, Y., Ye, S., Zhou, X., & Yu, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809195 · Cited by 390
Self-citation
Metadata
- Authors
- Lu, P., Sun, Y., Xiang, H., Liang, X., & Yu, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-12-04
- Volume
- 8
- Issue
- 8
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2771183572
- Cited by
- 691
- References
- 49
- FWCI
- 28.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.