The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
An Ultralong Lifespan and Low‐Temperature Workable Sodium‐Ion Full Battery for Stationary Energy Storage
Abstract
Presently, commercialization of sodium‐ion batteries (SIBs) is still hindered by the relatively poor energy‐storage performance. In addition, low‐temperature (low‐T) Na storage is another principal concern for the wide application of SIBs. Unfortunately, the Na‐transfer kinetics is extremely sluggish at low‐T, as a result, there are few reports on low‐T SIBs. Here, an advanced low‐T sodium‐ion full battery (SIFB) assembled by an anode of 3D Se/graphene composite and a high‐voltage cathode (Na 3 V 2(PO 4)2 O 2 F) is developed, exhibiting ultralong lifespan (over even 15 000 cycles, the capacity retention is still up to 86.3% at 1 A g−1), outstanding low‐T energy storage performance (e.g., all values of capacity retention are >75% after 1000 cycles at temperatures from 25 to −25 °C at 0.4 A g−1), and high‐energy/power properties. Such ultralong lifespan signifies that the developed sodium‐ion full battery can be used for longer than 60 years, if batteries charge/discharge once a day and 80% capacity retention is the standard of battery life. As a result, the present study not only promotes the practicability and commercialization of SIBs but also points out the new developing directions of next‐generation energy storage for wider range applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance
Chao, D., Zhu, C., Yang, P., Xia, X., Liu, J., Wang, J., Fan, X., Savilov, S. V., Lin, J., Fan, H. J., et al. (2016) · Nature Communications · doi:10.1038/ncomms12122 · Cited by 1,447
Self-citationChao, D., Liang, P., Chen, Z., Bai, L., Shen, H., Liu, X., Xia, X., Zhao, Y., Savilov, S. V., Lin, J., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b05566 · Cited by 973
Challenges and Perspectives for NASICON‐Type Electrode Materials for Advanced Sodium‐Ion Batteries
Chen, S., Wu, C., Shen, L., Zhu, C., Huang, Y., Xi, K., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700431 · Cited by 705
Electrolyte design strategies and research progress for room-temperature sodium-ion batteries
Che, H., Chen, S., Xie, Y., Wang, H., Amine, K., Liao, X.-Z., & Ma, Z.-F. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00524e · Cited by 676
A zero-strain layered metal oxide as the negative electrode for long-life sodium-ion batteries
Wang, Y., Yu, X., Xu, S., Bai, J., Xiao, R., Hu, Y.-S., Li, H., Yang, X.-Q., Chen, L., & Huang, X. (2013) · Nature Communications · doi:10.1038/ncomms3365 · Cited by 616
Self-citationThe Application of Metal Sulfides in Sodium Ion Batteries
Xiao, Y., Lee, S. H., & Sun, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601329 · Cited by 616
Urchin‐Like CoSe2 as a High‐Performance Anode Material for Sodium‐Ion Batteries
Zhang, K., Park, M., Zhou, L., Lee, G., Li, W., Kang, Y., & Chen, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602608 · Cited by 537
Subzero‐Temperature Cathode for a Sodium‐Ion Battery
You, Y., Yao, H., Xin, S., Yin, Y., Zuo, T., Yang, C., Guo, Y., Cui, Y., Wan, L., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201600846 · Cited by 534
Wang, N., Bai, Z., Qian, Y., & Yang, J. (2016) · Advanced Materials · doi:10.1002/adma.201505918 · Cited by 472
Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries
Yao, H.-R., Wang, P.-F., Gong, Y., Zhang, J., Yu, X., Gu, L., OuYang, C., Yin, Y.-X., Hu, E., Yang, X.-Q., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05176 · Cited by 466
Guo, J., Wang, P., Wu, X., Zhang, X., Yan, Q., Chen, H., Zhang, J., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201701968 · Cited by 458
Self-citationAn Advanced Selenium–Carbon Cathode for Rechargeable Lithium–Selenium Batteries
Yang, C., Xin, S., Yin, Y., Ye, H., Zhang, J., & Guo, Y. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201303147 · Cited by 452
Zhang, K., Park, M., Zhou, L., Lee, G., Shin, J., Hu, Z., Chou, S., Chen, J., & Kang, Y. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201607469 · Cited by 449
Selenium@Mesoporous Carbon Composite with Superior Lithium and Sodium Storage Capacity
Luo, C., Xu, Y., Zhu, Y., Liu, Y., Zheng, S., Liu, Y., Langrock, A., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn403108w · Cited by 439
Holey two-dimensional transition metal oxide nanosheets for efficient energy storage
Peng, L., Xiong, P., Ma, L., Yuan, Y., Zhu, Y., Chen, D., Luo, X., Lu, J., Amine, K., & Yu, G. (2017) · Nature Communications · doi:10.1038/ncomms15139 · Cited by 425
Zhang, K., Park, M., Zhou, L., Lee, G., Shin, J., Hu, Z., Chou, S., Chen, J., & Kang, Y. (2016) · Angewandte Chemie · doi:10.1002/ange.201607469 · Cited by 316
Oh, S.-M., Myung, S.-T., Yoon, C. S., Lu, J., Hassoun, J., Scrosati, B., Amine, K., & Sun, Y.-K. (2014) · Nano Letters · doi:10.1021/nl500077v · Cited by 314
Liang, L., Xu, Y., Wang, C., Wen, L., Fang, Y., Mi, Y., Zhou, M., Zhao, H., & Lei, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00878f · Cited by 307
Li, H., Peng, L., Zhu, Y., Chen, D., Zhang, X., & Yu, G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00794e · Cited by 270
Ding, J., Zhou, H., Zhang, H., Stephenson, T., Li, Z., Karpuzov, D., & Mitlin, D. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02274j · Cited by 220
Han, K., Liu, Z., Shen, J., Lin, Y., Dai, F., & Ye, H. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402815 · Cited by 218
Ye, H., Wang, L., Deng, S., Zeng, X., Nie, K., Duchesne, P. N., Wang, B., Liu, S., Zhou, J., Zhao, F., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601602 · Cited by 198
Electrochemistry of Selenium with Sodium and Lithium: Kinetics and Reaction Mechanism
Li, Q., Liu, H., Yao, Z., Cheng, J., Li, T., Li, Y., Wolverton, C., Wu, J., & Dravid, V. P. (2016) · ACS Nano · doi:10.1021/acsnano.6b04519 · Cited by 191
Advanced intermediate-temperature Na–S battery
Lu, X., Kirby, B. W., Xu, W., Li, G., Kim, J. Y., Lemmon, J. P., Sprenkle, V. L., & Yang, Z. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23606k · Cited by 187
A sodium-ion battery exploiting layered oxide cathode, graphite anode and glyme-based electrolyte
Hasa, I., Dou, X., Buchholz, D., Shao‐Horn, Y., Hassoun, J., Passerini, S., & Scrosati, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.082 · Cited by 169
The Electrochemistry with Lithium versus Sodium of Selenium Confined To Slit Micropores in Carbon
Xin, S., Yu, L., You, Y., Cong, H., Yin, Y., Du, X.-L., Guo, Y., Yu, S., Cui, Y., & Goodenough, J. B. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01819 · Cited by 156
Lu, Y., Zhang, N., Jiang, S., Zhang, Y., Zhou, M., Tao, Z., Archer, L. A., & Chen, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00889 · Cited by 140
Zheng, S., Han, P., Han, Z., et al. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400226 · Cited by 136
In situ formed carbon bonded and encapsulated selenium composites for Li–Se and Na–Se batteries
Luo, C. W., Wang, J., Suo, L., Mao, J., Fan, X., & Wang, C. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04611k · Cited by 127
Self-citationA selenium-confined microporous carbon cathode for ultrastable lithium–selenium batteries
Liu, Y., Si, L., Zhou, X., Liu, X., Xu, Y., Bao, J., & Dai, Z. H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03141e · Cited by 127
Li, X., Liang, J., Hou, Z., Zhang, W., Wang, Y., Zhu, Y., & Qian, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501956 · Cited by 126
Self-citationAll-climate sodium ion batteries based on the NASICON electrode materials
Liu, T., Wang, B., Gu, X., Wang, L., Ling, M., Liu, G., Wang, D., & Zhang, S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.024 · Cited by 122
Jiang, Y., Ma, X., Feng, J., & Xiong, S. L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06624c · Cited by 98
Zheng, C., Liu, M., Chen, W., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05029h · Cited by 57
Cited by
An aqueous hybrid electrolyte for low-temperature zinc-based energy storage devices
Chang, N., Li, T., Li, R., Wang, S., Yin, Y., Zhang, H., & Li, X. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01538e · Cited by 810
Exploring competitive features of stationary sodium ion batteries for electrochemical energy storage
Liu, T., Zhang, Y., Jiang, Z., Zeng, X., Ji, J., Li, Z., Gao, X., Sun, M., Lin, Z., Ling, M., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03727b · Cited by 592
Chen, M., Hua, W., Xiao, J., Cortie, D., Chen, W., Wang, E., Hu, Z., Gu, Q., Wang, X., Indris, S., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09170-5 · Cited by 522
Emerging Chemistry for Wide-Temperature Sodium-Ion Batteries
Zhang, F., He, B., Xin, Y., Zhu, T., Zhang, Y., Wang, S., Li, W., Yang, Y., & Tian, H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00728 · Cited by 357
Electrochemical energy storage devices working in extreme conditions
Chen, M., Zhang, Y., Xing, G., Chou, S.-L., & Tang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00271f · Cited by 346
Metadata
- Authors
- Wang, Y., Hou, B., Guo, J., Ning, Q., Pang, W., Wang, J., Lü, C., & Wu, X.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-03-12
- Volume
- 8
- Issue
- 18
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2792963857
- Cited by
- 267
- References
- 35
- FWCI
- 14.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.