The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Vertically Aligned Lithiophilic CuO Nanosheets on a Cu Collector to Stabilize Lithium Deposition for Lithium Metal Batteries
Abstract
Uncontrollable dendrite growth hinders the direct use of a lithium metal anode in batteries, even though it has the highest energy density of all anode materials. Achieving uniform lithium deposition is the key to solving this problem, but it is hard to be realized on a planar electrode surface. In this study, a thin lithiophilic layer consisting of vertically aligned CuO nanosheets directly grown on a planar Cu current collector is prepared by a simple wet chemical reaction. The lithiophilic nature of the CuO nanosheets reduces the polarization of the electrode, ensuring uniform Li nucleation and continuous smooth Li plating, which is difficult to realize on the normally used lithiophobic Cu current collector surface. The integration of the grown CuO arrays and the Cu current collector guarantees good electron transfer, and moreover, the vertically aligned channels between the CuO nanosheets guarantee fast ion diffusion and reduce the local current density. As a result, a high Columbic efficiency of 94% for 180 cycles at a current density of 1 mA cm−2 and a prolonged lifespan of a symmetrical cell (700 h at 0.5 mA cm−2) can be easily achieved, showing a simple but effective way to realize Li metal‐based anode stabilization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Self-citationSelective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
A Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
Self-citation3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Liang, Z., Lin, D., Zhao, J., Lu, Z., Liu, Y., Liu, C., Lu, Y., Wang, H., Yan, K., Tao, X., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518188113 · Cited by 846
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Self-citationLu, Q., He, Y., Yu, Q., Li, B., Kaneti, Y. V., Yao, Y., Kang, F., & Yang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201604460 · Cited by 727
Self-citationZhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Advanced Micro/Nanostructures for Lithium Metal Anodes
Zhang, R., Li, N., Cheng, X., Yin, Y., Zhang, Q., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600445 · Cited by 549
Towards High‐Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy
Wang, D., Zhang, W., Zheng, W., Cui, X., Rojo, T., & Zhang, Q. (2017) · Advanced Science · doi:10.1002/advs.201600168 · Cited by 548
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries
Jin, C., Sheng, O., Luo, J., Yuan, H., Fang, C., Zhang, W., Huang, H., Gan, Y., Xia, Y., Liang, C., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.015 · Cited by 501
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Wang, S., Yin, Y., Zuo, T., Dong, W., Li, J., Shi, J., Zhang, C., Li, N., Li, C., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703729 · Cited by 484
Self-citationHigh-capacity, low-tortuosity, and channel-guided lithium metal anode
Zhang, Y., Luo, W., Wang, C., Li, Y., Chen, C., Song, J., Dai, J., Hitz, E. M., Xu, S., Yang, C., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1618871114 · Cited by 472
Self-citationStabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
Yuan, S., Huang, X., Ma, D., Wang, H., Meng, F., & Zhang, X. (2014) · Advanced Materials · doi:10.1002/adma.201304469 · Cited by 454
In situ study of dendritic growth inlithium/PEO-salt/lithium cells
Brissot, C., Rosso, M., Chazalviel, J.-N., Baudry, P., & Lascaud, S. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(97)10055-x · Cited by 365
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Self-citationZhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie · doi:10.1002/ange.201702099 · Cited by 244
Lithium Batteries with Nearly Maximum Metal Storage
Raji, A.-R. O., Villegas Salvatierra, R., Kim, N. D., Fan, X., Li, Y., Silva, G. A. L., Sha, J., & Tour, J. M. (2017) · ACS Nano · doi:10.1021/acsnano.7b02731 · Cited by 196
Lu, L.-L., Zhang, Y., Pan, Z., Yao, H.-B., Zhou, F., & Yu, S.-H. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.06.004 · Cited by 170
Self-citationBasile, A., Bhatt, A. I., & O'Mullane, A. P. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.08.075 · Cited by 17
Cited by
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
A review of current collectors for lithium-ion batteries
Zhu, P., Gastol, D., Marshall, J., Sommerville, R., Goodship, V., & Kendrick, E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229321 · Cited by 523
Review on Li Deposition in Working Batteries: From Nucleation to Early Growth
Chen, X., Zhao, B., Yan, C., & Zhang, Q. (2021) · Advanced Materials · doi:10.1002/adma.202004128 · Cited by 456
He, B., Zhang, Q., Pan, Z., Li, L., Li, C., Ling, Y., Wang, Z., Chen, M., Wang, Z., Yao, Y., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00978 · Cited by 390
Metadata
- Authors
- Zhang, C., Lv, W., Zhou, G., Huang, Z., Zhang, Y., Lyu, R., Wu, H., Yun, Q., Kang, F., & Yang, Q.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-04-23
- Volume
- 8
- Issue
- 21
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2801448008
- Cited by
- 351
- References
- 36
- FWCI
- 18.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.