The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Understanding the Doping Effect on NiO: Toward High‐Performance Inverted Perovskite Solar Cells
Abstract
High‐quality hole transport layers are prepared by spin‐coating copper doped nickel oxide (Cu:NiO) nanoparticle inks at room temperature without further processing. In agreement with theoretical calculations predicting that Cu doping results in acceptor energy levels closer to the valence band maximum compared to gap states of nickel vacancies in undoped NiO, an increase in the conductivity in Cu:NiO films compared to NiO is observed. Cu in Cu:NiO can be found in both Cu+ and Cu 2+ states, and the substitution of Ni 2+ with Cu+ contributes to both increased carrier concentration and carrier mobility. In addition, the films exhibit increased work function, which together with the conductivity increase, enables improved charge transfer and extraction. Furthermore, recombination losses due to lower monomolecular Shockley‐Read‐Hall recombination are reduced. These factors result in an improvement of all photovoltaic performance parameters and consequently an increased efficiency of the inverted planar perovskite solar cells. A power conversion efficiency (PCE) exceeding 20% could be achieved for small‐area devices, while PCE values of 17.41 and 18.07% are obtained for flexible devices and large area (1 cm 2) devices on rigid substrates, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Self-citationEfficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Self-citationImproved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
The rapid evolution of highly efficient perovskite solar cells
Correa-Baena, J.-P., Abate, A., Saliba, M., Tress, W., Jesper Jacobsson, T., Grätzel, M., & Hagfeldt, A. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03397k · Cited by 1,140
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
Chen, H., Ye, F., Tang, W., He, J., Yin, M., Wang, Y., Xie, F., Bi, E., Yang, X., Grätzel, M., et al. (2017) · Nature · doi:10.1038/nature23877 · Cited by 716
Cited by
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Stability of perovskite solar cells: issues and prospects
Chowdhury, T. A., Bin Zafar, M. A., Sajjad-Ul Islam, M., Shahinuzzaman, M., Islam, M. A., & Khandaker, M. U. (2023) · RSC Advances · doi:10.1039/d2ra05903g · Cited by 444
Yin, X., Song, Z., Li, Z., & Tang, W. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02337j · Cited by 388
New Strategies for Defect Passivation in High‐Efficiency Perovskite Solar Cells
Akin, S., Arora, N., Zakeeruddin, S. M., Grätzel, M., Friend, R. H., & Dar, M. I. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903090 · Cited by 352
Wang, Y., Chen, W., Wang, L., Tu, B., Chen, T., Liu, B., Yang, K., Koh, C. W., Zhang, X., Sun, H., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902781 · Cited by 351
Self-citationChen, W., Zhou, Y., Chen, G., Wu, Y., Tu, B., Liu, F., Huang, L., Ng, A. M. C., Djurišić, A. B., & He, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803872 · Cited by 348
Self-citationRecent progress in the development of high-efficiency inverted perovskite solar cells
Liu, S., Biju, V. P., Qi, Y., Chen, W., & Liu, Z. (2023) · NPG Asia Materials · doi:10.1038/s41427-023-00474-z · Cited by 342
Self-citationThe Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Metal Oxide Charge Transport Layers for Efficient and Stable Perovskite Solar Cells
Shin, S. S., Lee, S. J., & Seok, S. I. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900455 · Cited by 283
Carbon doping switching on the hydrogen adsorption activity of NiO for hydrogen evolution reaction
Kou, T., Chen, M., Wu, F., Smart, T. J., Wang, S., Wu, Y., Zhang, Y., Li, S., Lall, S., Zhang, Z., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-14462-2 · Cited by 280
Self-citationSemitransparent Perovskite Solar Cells: From Materials and Devices to Applications
Shi, B., Duan, L., Zhao, Y., Luo, J., & Zhang, X. (2020) · Advanced Materials · doi:10.1002/adma.201806474 · Cited by 253
Flexible and Wearable Optoelectronic Devices Based on Perovskites
Zhao, R., Gu, Z., Li, P., Zhang, Y., & Song, Y. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101124 · Cited by 83
Li, S., Li, Y., Liu, K., Chen, M., Peng, W., Yang, Y., & Li, X. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.150470 · Cited by 11
Metadata
- Authors
- Chen, W., Wu, Y., Fan, J., Djurišić, A. B., Liu, F., Tam, H. W., Ng, A., Surya, C., Chan, W. K., Wang, D., & He, Z.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-03-25
- Volume
- 8
- Issue
- 19
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2790131787
- Cited by
- 435
- References
- 50
- FWCI
- 17.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.