The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Compact 3D Copper with Uniform Porous Structure Derived by Electrochemical Dealloying as Dendrite‐Free Lithium Metal Anode Current Collector
Abstract
The development of lithium (Li) metal anodes Li metal batteries faces huge challenges such as uncontrolled Li dendrite growth and large volume change during Li plating/stripping, resulting in severe capacity decay and high safety hazards. A 3D porous copper (Cu) current collector as a host for Li deposition can effectively settle these problems. However, constructing a uniform and compact 3D porous Cu structure is still an enormous challenge. Herein, an electrochemical etching method for Cu–Zinc (Zn) alloy is reported to precisely engrave a 3D Cu structure with uniform, smooth, and compact porous network. Such a continuous structure endows 3D Cu excellent mechanical properties and high electrical conductivity. The uniform and smooth pores with a large internal surface area ensures well dispersed current density for homogeneous Li metal deposition and accommodation. A smooth and stable solid electrolyte interphase is formed and meanwhile Li dendrites and dead Li are effectively suppressed. The Li metal anode conceived 3D Cu current collector can stably cycle for 400 h under an Li plating/stripping capacity of 1 mA h cm−2 and a current density of 1 mA cm−2. The Li@3D Cu||LiFePO 4 full cells present excellent cycling and rate performances. The electrochemical dealloying is a robust method to construct 3D Cu current collectors for dendrite‐free Li metal anodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries
Ji, L., Lin, Z., Alcoutlabi, M., & Zhang, X. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00699h · Cited by 2,240
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Cited by
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Li, F., He, J., Liu, J., Wu, M., Hou, Y., Wang, H., Qi, S., Liu, Q., Hu, J., & Ma, J. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202013993 · Cited by 373
Copper‐Based Plasmonic Catalysis: Recent Advances and Future Perspectives
Xin, Y., Yu, K., Zhang, L., Yang, Y., Yuan, H., Li, H., Wang, L., & Zeng, J. (2021) · Advanced Materials · doi:10.1002/adma.202008145 · Cited by 319
Metadata
- Authors
- Zhao, H., Lei, D., He, Y., Yuan, Y., Yun, Q., Ni, B., Lv, W., Li, B., Yang, Q., Kang, F., & Lu, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-03-30
- Volume
- 8
- Issue
- 19
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2795261559
- Cited by
- 431
- References
- 47
- FWCI
- 18.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Compact 3D Copper with Uniform Porous Structure Derived by Electrochemical Dealloying as Dendrite‐Free Lithium Metal Anode Current Collector. https://app.cochat.ai/papers/10.1002/aenm.201800266
- The paper
- Zhao, H., Lei, D., He, Y., Yuan, Y., Yun, Q., Ni, B., Lv, W., Li, B., Yang, Q., Kang, F., & Lu, J. (2018). Compact 3D Copper with Uniform Porous Structure Derived by Electrochemical Dealloying as Dendrite‐Free Lithium Metal Anode Current Collector. Advanced Energy Materials. https://doi.org/10.1002/aenm.201800266
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.