The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Electronic and Defective Engineering of Electrospun CaMnO3 Nanotubes for Enhanced Oxygen Electrocatalysis in Rechargeable Zinc–Air Batteries
Abstract
Rational design and massive production of bifunctional catalysts with superior oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities are essential for developing metal–air batteries and fuel cells. Herein, controllable large‐scale synthesis of sulfur‐doped CaMnO 3 nanotubes is demonstrated via an electrospinning technique followed by calcination and sulfurization treatment. The sulfur doping can not only replace oxygen atoms to increase intrinsic electrical conductivity but also introduce abundant oxygen vacancies to provide enough catalytically active sites, which is further demonstrated by density functional theory calculation. The resulting sulfur‐modified CaMnO 3 (CMO/S) exhibits better electrocatalytic activity for ORR and OER in alkaline solution with higher stability performance than the pristine CMO. These results highlight the importance of sulfur treatment as a facile yet effective strategy to improve the ORR and OER catalytic activity of the pristine CaMnO 3. As a proof‐of‐concept, a rechargeable Zn–air battery using the bifunctional catalyst exhibits a small charge–discharge voltage polarization, and long cycling life. Furthermore, a solid‐state flexible and rechargeable Zn–air battery gives superior discharge–charge performance and remarkable stability. Therefore, the CMO/S nanotubes might be a promising replacement to the Pt‐based electrocatalysts for metal–air batteries and fuel cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives
Suen, N.-T., Hung, S.-F., Quan, Q., Zhang, N., Xu, Y.-J., & Chen, H. M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00328a · Cited by 6,307
A metal-free bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions
Zhang, J., Zhao, Z., Xia, Z., & Dai, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.48 · Cited by 3,094
Hollow Micro‐/Nanostructures: Synthesis and Applications
Lou, X. W. (., Archer, L. A., & Yang, Z. (2008) · Advanced Materials · doi:10.1002/adma.200800854 · Cited by 2,992
Suntivich, J., Gasteiger, H. A., Yabuuchi, N., Nakanishi, H., Goodenough, J. B., & Shao-Horn, Y. (2011) · Nature Chemistry · doi:10.1038/nchem.1069 · Cited by 2,904
Toward the rational design of non-precious transition metal oxides for oxygen electrocatalysis
Hong, W. T., Risch, M., Stoerzinger, K. A., Grimaud, A., Suntivich, J., & Shao-Horn, Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03869j · Cited by 2,089
Cheng, F., Shen, J., Peng, B., Pan, Y., Tao, Z., & Chen, J. (2011) · Nature Chemistry · doi:10.1038/nchem.931 · Cited by 1,298
Xiao, Z., Wang, Y., Huang, Y.-C., Wei, Z., Dong, C.-L., Ma, J., Shen, S., Li, Y., & Wang, S. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01917c · Cited by 1,063
Toupin, M., Brousse, T., & Bélanger, D. (2002) · Chemistry of Materials · doi:10.1021/cm020408q · Cited by 990
Zhong, H., Wang, J., Zhang, Y., Xu, W., Xing, W., Xu, D., Zhang, Y., & Zhang, X. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408990 · Cited by 938
Nonaqueous Li–Air Batteries: A Status Report
Luntz, A. C., & McCloskey, B. D. (2014) · Chemical Reviews · doi:10.1021/cr500054y · Cited by 925
Liu, Z., Cheng, H., Li, N., Ma, T. Y., & Su, Y. (2016) · Advanced Materials · doi:10.1002/adma.201506197 · Cited by 736
Liu, Q., Wang, Y., Dai, L., & Yao, J. (2016) · Advanced Materials · doi:10.1002/adma.201506112 · Cited by 652
Ganesan, P., Prabu, M., Sanetuntikul, J., & Shanmugam, S. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b00154 · Cited by 614
Making Li‐Air Batteries Rechargeable: Material Challenges
Shao, Y., Ding, F., Xiao, J., Zhang, J., Xu, W., Park, S., Zhang, J., Wang, Y., & Liu, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200688 · Cited by 541
Self-citationCa2Mn2O5 as Oxygen-Deficient Perovskite Electrocatalyst for Oxygen Evolution Reaction
Kim, J., Yin, X., Tsao, K.-C., Fang, S., & Yang, H. (2014) · Journal of the American Chemical Society · doi:10.1021/ja506254g · Cited by 527
Xu, J., Xu, D., Wang, Z., Wang, H., Zhang, L., & Zhang, X. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201210057 · Cited by 513
Calcium Manganese(III) Oxides (CaMn2O4⋅x H2O) as Biomimetic Oxygen‐Evolving Catalysts
Najafpour, M. M., Ehrenberg, T., Wiechen, M., & Kurz, P. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200906745 · Cited by 496
General synthesis of complex nanotubes by gradient electrospinning and controlled pyrolysis
Niu, C., Meng, J., Wang, X., Han, C., Yan, M., Zhao, K., Xu, X., Ren, W., Zhao, Y., Xu, L., et al. (2015) · Nature Communications · doi:10.1038/ncomms8402 · Cited by 422
Peng, S., Li, L., Hu, Y., Srinivasan, M., Cheng, F., Chen, J., & Ramakrishna, S. (2015) · ACS Nano · doi:10.1021/nn506851x · Cited by 387
Self-citationPeng, S., Jin, G., Li, L., Li, K., Srinivasan, M., Ramakrishna, S., & Chen, J. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00777a · Cited by 377
Self-citationPickrahn, K. L., Park, S. W., Gorlin, Y., Lee, H., Jaramillo, T. F., & Bent, S. F. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200230 · Cited by 322
Jin, C., Lu, F., Cao, X., Yang, Z., & Yang, R. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12118f · Cited by 322
Guo, Y., Tong, Y., Chen, P., Xu, K., Zhao, J., Lin, Y., Chu, W., Peng, Z., Wu, C., & Xie, Y. (2015) · Advanced Materials · doi:10.1002/adma.201502024 · Cited by 302
Li, G., Wang, X., Fu, J., Li, J., Park, M. G., Zhang, Y., Lui, G., & Chen, Z. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201600750 · Cited by 287
Zhuo, J., Cabán-Acevedo, M., Liang, H., Samad, L., Ding, Q., Fu, Y., Li, M., & Jin, S. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b01657 · Cited by 280
Lee, J.-S., Park, G. S., Lee, H. I., Kim, S. T., Cao, R., Liu, M., & Cho, J. (2011) · Nano Letters · doi:10.1021/nl2029078 · Cited by 279
Electrocatalytic activity of manganese oxides prepared by thermal decomposition for oxygen reduction
Lima, F. H. B., Calegaro, M. L., & Ticianelli, E. A. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2006.10.047 · Cited by 267
Han, X., Cheng, F., Zhang, T., Yang, J., Hu, Y., & Chen, J. (2014) · Advanced Materials · doi:10.1002/adma.201304867 · Cited by 262
Self-citationNonstoichiometric Perovskite CaMnO3−δ for Oxygen Electrocatalysis with High Activity
Du, J., Zhang, T., Cheng, F., Chu, W., Wu, Z., & Chen, J. (2014) · Inorganic Chemistry · doi:10.1021/ic501631h · Cited by 242
Yoon, K. R., Lee, G. Y., Jung, J.-W., Kim, N.-H., Kim, S. O., & Kim, I.-D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00185 · Cited by 208
Low overpotential water oxidation to hydrogen peroxide on a MnOx catalyst
Izgorodin, A., Izgorodina, E., & MacFarlane, D. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21832a · Cited by 206
Chen, Y., Lu, Z., Zhou, L., Mai, Y.-W., & Huang, H. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22085g · Cited by 201
Self-citationPorous calcium–manganese oxide microspheres for electrocatalytic oxygen reduction with high activity
Han, X., Zhang, T., Du, J., Cheng, F., & Chen, J. (2013) · Chem. Sci. · doi:10.1039/c2sc21475j · Cited by 180
Self-citation3D Ordered Mesoporous Bifunctional Oxygen Catalyst for Electrically Rechargeable Zinc–Air Batteries
Park, M. G., Lee, D. U., Seo, M. H., Cano, Z. P., & Chen, Z. (2016) · Small · doi:10.1002/smll.201600051 · Cited by 157
Jin, L., Xu, L., Morein, C., et al. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001080 · Cited by 155
Superior Performance of a Li–O2 Battery with Metallic RuO2 Hollow Spheres as the Carbon‐Free Cathode
Li, F., Tang, D., Zhang, T., Liao, K., He, P., Golberg, D. V., Yamada, A., & Zhou, H. S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500294 · Cited by 153
Porous perovskite CaMnO 3 as an electrocatalyst for rechargeable Li–O 2 batteries
Han, X., Hu, Y., Yang, J., Cheng, F., & Chen, J. (2013) · Chemical Communications · doi:10.1039/c3cc48207c · Cited by 151
Self-citationNitrogen doped carbon nanotubes synthesized from aliphatic diamines for oxygen reduction reaction
Higgins, D. C., Chen, Z., & Chen, Z. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.11.003 · Cited by 137
Role of Cu-Ion Doping in Cu-α-MnO2 Nanowire Electrocatalysts for the Oxygen Reduction Reaction
Davis, D. J., Lambert, T. N., Vigil, J. A., Rodriguez, M. A., Brumbach, M. T., Coker, E. N., & Limmer, S. J. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5039865 · Cited by 128
Porous AgPd–Pd Composite Nanotubes as Highly Efficient Electrocatalysts for Lithium–Oxygen Batteries
Luo, W., Gao, X., Chou, S., Wang, J., & Liu, H. (2015) · Advanced Materials · doi:10.1002/adma.201502262 · Cited by 116
Self-citationWang, J. X., Wu, Z., Han, L., Lin, R., Xin, H. L., & Wang, D. (2016) · ChemCatChem · doi:10.1002/cctc.201501058 · Cited by 85
Ramírez, A., Bogdanoff, P., Friedrich, D., & Fiechter, S. M. (2011) · Nano Energy · doi:10.1016/j.nanoen.2011.10.003 · Cited by 66
Gao, S., & Geng, K. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.02.013 · Cited by 63
The Hydric Effect in Inorganic Nanomaterials for Nanoelectronics and Energy Applications
Sun, X., Guo, Y., Wu, C., & Xie, Y. (2015) · Advanced Materials · doi:10.1002/adma.201500546 · Cited by 61
Pargoletti, E., Cappelletti, G., Minguzzi, A., Rondinini, S., Leoni, M., Marelli, M., & Vertova, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.020 · Cited by 50
Kim, J., Chen, X., Pan, Y.-T. F., Shih, P.-C., & Yang, H. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0471712jes · Cited by 23
Cited by
Defect Engineering on Electrode Materials for Rechargeable Batteries
Zhang, Y., Tao, L., Xie, C., Wang, D., Zou, Y., Chen, R., Wang, Y., Jia, C., & Wang, S. (2020) · Advanced Materials · doi:10.1002/adma.201905923 · Cited by 1,019
Ji, D., Lin, Y., Guo, X., Ramasubramanian, B., Wang, R., Radacsi, N., Jose, R., Qin, X., & Ramakrishna, S. (2024) · Nature Reviews Methods Primers · doi:10.1038/s43586-023-00278-z · Cited by 756
Self-citationRecent advances of noble-metal-free bifunctional oxygen reduction and evolution electrocatalysts
Zhao, C.-X., Liu, J.-N., Wang, J., Ren, D., Li, B.-Q., & Zhang, Q. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00135c · Cited by 672
Self-citationAn overview of advanced methods for the characterization of oxygen vacancies in materials
Ye, K., Li, K., Lu, Y., Guo, Z., Ni, N., Liu, H., Huang, Y., Ji, H., & Wang, P. (2019) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2019.05.002 · Cited by 669
Han, X., Ling, X., Wang, Y., Ma, T., Zhong, C., Hu, W., & Deng, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201901109 · Cited by 658
Self-citation
Metadata
- Authors
- Peng, S., Han, X., Li, L., Chou, S., Ji, D., Huang, H., Du, Y., Liu, J., & Ramakrishna, S.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-05-25
- Volume
- 8
- Issue
- 22
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2803493529
- Cited by
- 294
- References
- 46
- FWCI
- 8.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.