The DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index.
Perovskite Solar Cells: Can We Go Organic‐Free, Lead‐Free, and Dopant‐Free?
Open accessAbstract
Having demonstrated incredibly fast progress in power conversion efficiency, rising to a level comparable with that of crystalline silicon cells, lead‐based organic–inorganic hybrid perovskite solar cells are now facing the stability tests needed for industrialization. Poor thermal stability (<150 °C) owing to organic constituents and interlayer diffusion of materials (dopants), and environmental incompatibility due to Pb has surged the development of organic‐free, Pb‐free perovskites and dopant‐free hole transport materials (HTMs). The recent rapid increase in efficiency of cells based on inorganic perovskites, crossing 18%, demonstrates the great potential of inorganic perovskites as thermally stable and high‐efficiency cells. Although all kinds of Pb‐free perovskites lag in efficiency in comparison to the hybrid and inorganic perovskites, they also demonstrate better structural and environmental stability. The performance of dopant‐free HTMs matching/surpassing dopant‐containing HTMs makes the former a better choice for stability. Even though the efforts to enhance the stability of Pb‐based hybrid perovskites should continue by different techniques, organic‐free and lead‐free perovskites, and dopant‐free HTMs must be pursued with greater interest for the future. This review describes the present issues and possible strategies to address them, and thus will help to improve the overall performance of robust organic‐free, Pb‐free, and dopant‐free perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Self-citationEfficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Self-citationStoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Self-citationLead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
Idota, Y., Kubota, T., Matsufuji, A., Maekawa, Y., & Miyasaka, T. (1997) · Science · doi:10.1126/science.276.5317.1395 · Cited by 2,578
Self-citationEfficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Cited by
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
The high open-circuit voltage of perovskite solar cells: a review
Guo, Z., Jena, A. K., Kim, G. M., & Miyasaka, T. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00663d · Cited by 430
Self-citationTemperature-Dependent Optical Band Gap in CsPbBr3, MAPbBr3, and FAPbBr3 Single Crystals
Mannino, G., Deretzis, I., Smecca, E., La Magna, A., Alberti, A., Ceratti, D., & Cahen, D. (2020) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.0c00295 · Cited by 355
A brief review of hole transporting materials commonly used in perovskite solar cells
Li, S., Cao, Y., Li, W., & Bo, Z. (2021) · Rare Metals · doi:10.1007/s12598-020-01691-z · Cited by 346
Qin, M., Chan, P. F., & Lu, X. (2021) · Advanced Materials · doi:10.1002/adma.202105290 · Cited by 337
Review on recent progress of lead-free halide perovskites in optoelectronic applications
Li, J., Duan, J., Yang, X., Duan, Y., Yang, P., & Tang, Q. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105526 · Cited by 254
Finding junction partners for CsPbI3 in a two-terminal tandem solar cell: A theoretical prospect
Meng, L., Wei, Z., Zuo, T., & Gao, P. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104866 · Cited by 63
Metadata
- Authors
- Miyasaka, T., Kulkarni, A., Kim, G. M., Öz, S., & Jena, A. K.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-10-07
- Volume
- 10
- Issue
- 13
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2977911197
- Cited by
- 293
- References
- 107
- FWCI
- 14.01
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.