The DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index.
Perovskite Solar Cells: Can We Go Organic‐Free, Lead‐Free, and Dopant‐Free?
Open accessAbstract
Having demonstrated incredibly fast progress in power conversion efficiency, rising to a level comparable with that of crystalline silicon cells, lead‐based organic–inorganic hybrid perovskite solar cells are now facing the stability tests needed for industrialization. Poor thermal stability (<150 °C) owing to organic constituents and interlayer diffusion of materials (dopants), and environmental incompatibility due to Pb has surged the development of organic‐free, Pb‐free perovskites and dopant‐free hole transport materials (HTMs). The recent rapid increase in efficiency of cells based on inorganic perovskites, crossing 18%, demonstrates the great potential of inorganic perovskites as thermally stable and high‐efficiency cells. Although all kinds of Pb‐free perovskites lag in efficiency in comparison to the hybrid and inorganic perovskites, they also demonstrate better structural and environmental stability. The performance of dopant‐free HTMs matching/surpassing dopant‐containing HTMs makes the former a better choice for stability. Even though the efforts to enhance the stability of Pb‐based hybrid perovskites should continue by different techniques, organic‐free and lead‐free perovskites, and dopant‐free HTMs must be pursued with greater interest for the future. This review describes the present issues and possible strategies to address them, and thus will help to improve the overall performance of robust organic‐free, Pb‐free, and dopant‐free perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Self-citationEfficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Self-citationStoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Self-citationLead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
Idota, Y., Kubota, T., Matsufuji, A., Maekawa, Y., & Miyasaka, T. (1997) · Science · doi:10.1126/science.276.5317.1395 · Cited by 2,578
Self-citationEfficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Slavney, A. H., Hu, T., Lindenberg, A. M., & Karunadasa, H. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13294 · Cited by 2,204
All-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Cs2AgBiX6 (X = Br, Cl): New Visible Light Absorbing, Lead-Free Halide Perovskite Semiconductors
McClure, E. T., Ball, M. R., Windl, W., & Woodward, P. M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04231 · Cited by 1,674
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
Toxicity of organometal halide perovskite solar cells
Babayigit, A., Ethirajan, A., Muller, M., & Conings, B. (2016) · Nature Materials · doi:10.1038/nmat4572 · Cited by 1,533
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application
Park, B., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G., & Johansson, E. M. J. (2015) · Advanced Materials · doi:10.1002/adma.201501978 · Cited by 1,269
Thermodynamically stabilized β-CsPbI 3 –based perovskite solar cells with efficiencies >18%
Wang, Y., Dar, M. I., Ono, L. K., Zhang, T., Kan, M., Li, Y., Zhang, L., Wang, X., Yang, Y., Gao, X., et al. (2019) · Science · doi:10.1126/science.aav8680 · Cited by 1,249
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Domanski, K., Correa-Baena, J.-P., Mine, N., Nazeeruddin, M. K., Abate, A., Saliba, M., Tress, W., Hagfeldt, A., & Grätzel, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b02613 · Cited by 1,245
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
Chung, I., Song, J.-H., Im, J., Androulakis, J., Malliakas, C. D., Li, H., Freeman, A. J., Kenney, J. T., & Kanatzidis, M. G. (2012) · Journal of the American Chemical Society · doi:10.1021/ja301539s · Cited by 1,203
Towards stable and commercially available perovskite solar cells
Park, N.-G., Grätzel, M., Miyasaka, T., Zhu, K., & Emery, K. (2016) · Nature Energy · doi:10.1038/nenergy.2016.152 · Cited by 1,182
Self-citationLead-free germanium iodide perovskite materials for photovoltaic applications
Krishnamoorthy, T., Ding, H., Yan, C., Leong, W. L., Baikie, T., Zhang, Z., Sherburne, M., Li, S., Asta, M., Mathews, N., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05741h · Cited by 1,164
Cesium Enhances Long-Term Stability of Lead Bromide Perovskite-Based Solar Cells
Kulbak, M., Gupta, S., Kedem, N., Levine, I., Bendikov, T., Hodes, G., & Cahen, D. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02597 · Cited by 1,001
Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency
Shao, S., Liu, J., Portale, G., Fang, H., Blake, G. R., ten Brink, G. H., Koster, L. J. A., & Loi, M. A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702019 · Cited by 904
(2020) · INDIGO (University of Illinois at Chicago) · doi:10.1021/jacs.5b13294.s002 · Cited by 892
Liao, Y., Liu, H., Zhou, W., Yang, D., Shang, Y., Shi, Z., Li, B., Jiang, X., Zhang, L., Quan, L. N., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01815 · Cited by 877
The Renaissance of Halide Perovskites and Their Evolution as Emerging Semiconductors
Stoumpos, C. C., & Kanatzidis, M. G. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00229 · Cited by 820
Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor
Saparov, B., Hong, F., Sun, J.-P., Duan, H.-S., Meng, W., Cameron, S., Hill, I. G., Yan, Y., & Mitzi, D. B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01989 · Cited by 812
Chemical stability and instability of inorganic halide perovskites
Zhou, Y., & Zhao, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03559h · Cited by 784
Highly stable, phase pure Cs2AgBiBr6 double perovskite thin films for optoelectronic applications
Greul, E., Petrus, M. L., Binek, A., Docampo, P., & Bein, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06816f · Cited by 772
Marronnier, A., Roma, G., Boyer-Richard, S., Pedesseau, L., Jancu, J.-M., Bonnassieux, Y., Katan, C., Stoumpos, C. C., Kanatzidis, M. G., & Even, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b00267 · Cited by 753
Light-Induced Phase Segregation in Halide-Perovskite Absorbers
Slotcavage, D. J., Karunadasa, H. I., & McGehee, M. D. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00495 · Cited by 712
Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics
Wang, Y., Zhang, T., Kan, M., & Zhao, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07927 · Cited by 690
Li, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
Thermal unequilibrium of strained black CsPbI 3 thin films
Steele, J. A., Jin, H., Dovgaliuk, I., Berger, R. F., Braeckevelt, T., Yuan, H., Martin, C., Solano, E., Lejaeghere, K., Rogge, S. M. J., et al. (2019) · Science · doi:10.1126/science.aax3878 · Cited by 661
Zhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Wang, P., Zhang, X., Zhou, Y., Jiang, Q., Ye, Q., Chu, Z., Li, X., Yang, X., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-04636-4 · Cited by 637
Cesium Titanium(IV) Bromide Thin Films Based Stable Lead-free Perovskite Solar Cells
Chen, M., Ju, M.-G., Carl, A. D., Zong, Y., Grimm, R. L., Gu, J., Zeng, X. C., Zhou, Y., & Padture, N. P. (2018) · Joule · doi:10.1016/j.joule.2018.01.009 · Cited by 607
Tress, W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602358 · Cited by 601
A critical review on tin halide perovskite solar cells
Konstantakou, M., & Stergiopoulos, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00929a · Cited by 600
Singh, T., & Miyasaka, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201700677 · Cited by 572
Self-citationThe Dawn of Lead‐Free Perovskite Solar Cell: Highly Stable Double Perovskite Cs2AgBiBr6 Film
Wu, C., Zhang, Q., Liu, Y., Luo, W., Guo, X., Huang, Z., Ting, H., Sun, W., Zhong, X., Wei, S., et al. (2018) · Advanced Science · doi:10.1002/advs.201700759 · Cited by 571
Qiu, X., Cao, B., Yuan, S., Chen, X., Qiu, Z., Jiang, Y., Ye, Q., Wang, H., Zeng, H., Liu, J., et al. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.09.022 · Cited by 556
Can Pb-Free Halide Double Perovskites Support High-Efficiency Solar Cells?
Savory, C. N., Walsh, A., & Scanlon, D. O. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00471 · Cited by 554
Bismuth Incorporation Stabilized α-CsPbI3 for Fully Inorganic Perovskite Solar Cells
Hu, Y., Bai, F., Liu, X., Ji, Q., Miao, X., Qiu, T., & Zhang, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00508 · Cited by 547
Wang, Q., Zheng, X., Deng, Y., Zhao, J., Chen, Z., & Huang, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.017 · Cited by 544
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Ju, M.-G., Chen, M., Zhou, Y., Garces, H. F., Dai, J., Ma, L., Padture, N. P., & Zeng, X. C. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01167 · Cited by 476
Europium-Doped CsPbI2Br for Stable and Highly Efficient Inorganic Perovskite Solar Cells
Xiang, W., Wang, Z., Kubicki, D. J., Tress, W., Luo, J., Prochowicz, D., Akin, S., Emsley, L., Zhou, J., Dietler, G., et al. (2019) · Joule · doi:10.1016/j.joule.2018.10.008 · Cited by 460
Hawash, Z., Ono, L. K., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201700623 · Cited by 455
p-type Mesoscopic Nickel Oxide/Organometallic Perovskite Heterojunction Solar Cells
Wang, K.-C., Jeng, J.-Y., Shen, P.-S., Chang, Y.-C., Diau, E. W.-G., Tsai, C.-H., Chao, T.-Y., Hsu, H.-C., Lin, P.-Y., Chen, P., et al. (2014) · Scientific Reports · doi:10.1038/srep04756 · Cited by 444
Thin-Film Deposition and Characterization of a Sn-Deficient Perovskite Derivative Cs2SnI6
Saparov, B., Sun, J.-P., Meng, W., Xiao, Z., Duan, H.-S., Gunawan, O., Shin, D., Hill, I. G., Yan, Y., & Mitzi, D. B. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00433 · Cited by 434
Sabba, D., Mulmudi, H. K., Prabhakar, R. R., Krishnamoorthy, T., Baikie, T., Boix, P. P., Mhaisalkar, S., & Mathews, N. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp5126624 · Cited by 421
Direct calorimetric verification of thermodynamic instability of lead halide hybrid perovskites
Nagabhushana, G. P., Shivaramaiah, R., & Navrotsky, A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1607850113 · Cited by 415
Bai, D., Zhang, J., Jin, Z., Bian, H., Wang, K., Wang, H., Liang, L., Wang, Q., & Liu, S. F. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00270 · Cited by 410
Ye, S., Rao, H., Zhao, Z., Zhang, L., Bao, H., Sun, W., Li, Y., Gu, F., Wang, J., Liu, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01439 · Cited by 401
Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability
Tian, J., Xue, Q., Tang, X., Chen, Y., Li, N., Hu, Z., Shi, T., Wang, X., Huang, F., Brabec, C. J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901152 · Cited by 398
Chen, C., Lin, H., Chiang, K., Tsai, W., Huang, Y., Tsao, C., & Lin, H. (2017) · Advanced Materials · doi:10.1002/adma.201605290 · Cited by 395
Thermodynamically Stable Orthorhombic γ-CsPbI3 Thin Films for High-Performance Photovoltaics
Zhao, B., Jin, S.-F., Huang, S., Liu, N., Ma, J.-Y., Xue, D.-J., Han, Q., Ding, J., Ge, Q.-Q., Feng, Y., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06050 · Cited by 380
Methylammonium Bismuth Iodide as a Lead‐Free, Stable Hybrid Organic–Inorganic Solar Absorber
Hoye, R. L. Z., Brandt, R. E., Osherov, A., Stevanović, V., Stranks, S. D., Wilson, M. W. B., Kim, H., Akey, A. J., Perkins, J. D., Kurchin, R. C., et al. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201505055 · Cited by 368
Chen, L.-J., Lee, C.-R., Chuang, Y.-J., Wu, Z.-H., & Chen, C. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02344 · Cited by 361
Theoretical insights into a potential lead-free hybrid perovskite: substituting Pb2+with Ge2+
Sun, P.-P., Li, Q.-S., Yang, L.-N., & Li, Z.-S. (2016) · Nanoscale · doi:10.1039/c5nr05337d · Cited by 348
Ionic Reactivity at Contacts and Aging of Methylammonium Lead Triiodide Perovskite Solar Cells
Carrillo, J., Guerrero, A., Rahimnejad, S., Almora, O., Zarazua, I., Mas‐Marza, E., Bisquert, J., & Garcia‐Belmonte, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502246 · Cited by 339
Liu, X., Tan, X., Liu, Z., Ye, H., Sun, B., Shi, T., Tang, Z., & Liao, G. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.11.053 · Cited by 338
Zhang, H., Wang, H., Chen, W., & Jen, A. K. ‐. (2017) · Advanced Materials · doi:10.1002/adma.201604984 · Cited by 335
Long Electron–Hole Diffusion Length in High‐Quality Lead‐Free Double Perovskite Films
Ning, W., Wang, F., Wu, B., Lu, J., Yan, Z., Liu, X., Tao, Y., Liu, J., Huang, W., Fahlman, M., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706246 · Cited by 334
Precursor Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with 14.78% Efficiency
Yin, G., Zhao, H., Jiang, H., Yuan, S., Niu, T., Zhao, K., Liu, Z., & Liu, S. (. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803269 · Cited by 330
Singh, T., Kulkarni, A., Ikegami, M., & Miyasaka, T. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02843 · Cited by 318
Self-citationLi, W., Li, J., Li, J., Fan, J., Mai, Y., & Wang, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08332c · Cited by 318
Lead-Free Mixed Tin and Germanium Perovskites for Photovoltaic Application
Ju, M.-G., Dai, J., Ma, L., & Zeng, X. C. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04219 · Cited by 314
Fundamental Efficiency Limit of Lead Iodide Perovskite Solar Cells
Pazos-Outón, L. M., Xiao, T. P., & Yablonovitch, E. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b03054 · Cited by 305
Myths and reality of HPbI3 in halide perovskite solar cells
Ke, W., Spanopoulos, I., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Nature Communications · doi:10.1038/s41467-018-07204-y · Cited by 304
Mixed Sn–Ge Perovskite for Enhanced Perovskite Solar Cell Performance in Air
Ito, N., Kamarudin, M. A., Hirotani, D., Zhang, Y., Shen, Q., Ogomi, Y., Iikubo, S., Minemoto, T., Yoshino, K., & Hayase, S. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b00275 · Cited by 299
Jena, A. K., Numata, Y., Ikegami, M., & Miyasaka, T. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta07674f · Cited by 291
Self-citationChen, W.-Y., Deng, L.-L., Dai, S.-M., Wang, X., Tian, C.-B., Zhan, X.-X., Xie, S.-Y., Huang, R.-B., & Zheng, L.-S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05286f · Cited by 290
High-Quality (CH3NH3)3Bi2I9 Film-Based Solar Cells: Pushing Efficiency up to 1.64%
Zhang, Z., Li, X., Xia, X., Wang, Z., Huang, Z., Lei, B., & Gao, Y. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01952 · Cited by 271
Stability of solution-processed MAPbI3 and FAPbI3 layers
Smecca, E., Numata, Y., Deretzis, I., Pellegrino, G., Boninelli, S., Miyasaka, T., La Magna, A., & Alberti, A. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00721j · Cited by 265
Self-citationLocal Observation of Phase Segregation in Mixed-Halide Perovskite
Tang, X., van den Berg, M., Gu, E., Horneber, A., Matt, G. J., Osvet, A., Meixner, A. J., Zhang, D., & Brabec, C. J. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00505 · Cited by 261
Singh, T., Öz, S., Sasinska, A., Frohnhoven, R., Mathur, S., & Miyasaka, T. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706287 · Cited by 248
Self-citationJain, S. M., Phuyal, D., Davies, M. L., Li, M., Philippe, B., De Castro, C., Qiu, Z., Kim, J., Watson, T., Tsoi, W. C., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.05.003 · Cited by 245
Rakstys, K., Igci, C., & Nazeeruddin, M. K. (2019) · Chemical Science · doi:10.1039/c9sc01184f · Cited by 241
Wu, B., Zhou, Y., Xing, G., Xu, Q., Garces, H. F., Solanki, A., Goh, T. W., Padture, N. P., & Sum, T. C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604818 · Cited by 239
Stabilization of α-CsPbI3 in Ambient Room Temperature Conditions by Incorporating Eu into CsPbI3
Jena, A. K., Kulkarni, A., Sanehira, Y., Ikegami, M., & Miyasaka, T. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01808 · Cited by 238
Self-citationLau, C. F. J., Deng, X., Zheng, J., Kim, J., Zhang, Z., Zhang, M., Bing, J., Wilkinson, B., Hu, L., Patterson, R., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11154a · Cited by 236
Zero-dimensional (CH3NH3)3Bi2I9 perovskite for optoelectronic applications
Öz, S., Hebig, J.-C., Jung, E., Singh, T., Lepcha, A., Olthof, S., Jan, F., Gao, Y., German, R., van Loosdrecht, P. H. M., et al. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.01.035 · Cited by 230
Self-citationChen, K., Wu, P., Yang, W., Su, R., Luo, D., Yang, X., Tu, Y., Zhu, R., & Gong, Q. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.05.006 · Cited by 229
Lee, B., Krenselewski, A., Baik, S. I., Seidman, D. N., & Chang, R. P. H. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00100b · Cited by 228
Solution-processable antimony-based light-absorbing materials beyond lead halide perovskites
Boopathi, K. M., Karuppuswamy, P., Singh, A., Hanmandlu, C., Lin, L., Abbas, S. A., Chang, C. C., Wang, P. C., Li, G., & Chu, C. W. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta06679a · Cited by 217
Marshall, K. P., Walton, R. I., & Hatton, R. A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02950c · Cited by 213
Bai, D., Bian, H., Jin, Z., Wang, H., Meng, L., Wang, Q., & (Frank) Liu, S. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.012 · Cited by 208
Fu, Y., Rea, M. T., Chen, J., Morrow, D. J., Hautzinger, M. P., Zhao, Y., Pan, D., Manger, L. H., Wright, J. C., Goldsmith, R. H., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02948 · Cited by 207
All‐Inorganic CsPb1−xGexI2Br Perovskite with Enhanced Phase Stability and Photovoltaic Performance
Yang, F., Hirotani, D., Kapil, G., Kamarudin, M. A., Ng, C. H., Zhang, Y., Shen, Q., & Hayase, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807270 · Cited by 186
Dong, C., Han, X., Zhao, Y., Li, J., Chang, L., & Zhao, W. (2018) · Solar RRL · doi:10.1002/solr.201800139 · Cited by 159
Pai, N., Lu, J., Gengenbach, T. R., Seeber, A., Chesman, A. S. R., Jiang, L., Senevirathna, D. C., Andrews, P. C., Bach, U., Cheng, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201803396 · Cited by 152
Anharmonicity and Octahedral Tilting in Hybrid Vacancy-Ordered Double Perovskites
Maughan, A. E., Ganose, A. M., Candia, A. M., Granger, J. T., Scanlon, D. O., & Neilson, J. R. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04516 · Cited by 151
Role of GeI2 and SnF2 additives for SnGe perovskite solar cells
Ng, C. H., Nishimura, K., Ito, N., Hamada, K., Hirotani, D., Wang, Z., Yang, F., likubo, S., Shen, Q., Yoshino, K., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.026 · Cited by 148
Zhang, S., Wu, S., Chen, W., Zhu, H., Xiong, Z., Yang, Z., Chen, C., Chen, R., Han, L., & Chen, W. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2018.03.006 · Cited by 144
Nagane, S., Ghosh, D., Hoye, R. L. Z., Zhao, B., Ahmad, S., Walker, A., Islam, M. S., Ogale, S., & Sadhanala, A. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b00480 · Cited by 139
Tang, L., Chang, Y., Huang, J.-Y., Lee, M., & Chang, C.-S. (2009) · Japanese Journal of Applied Physics · doi:10.1143/jjap.48.112402 · Cited by 107
Lead Halide Perovskites in Thin Film Photovoltaics: Background and Perspectives
Miyasaka, T. (2018) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20180071 · Cited by 106
Self-citationRecent progress on stability issues of organic–inorganic hybrid lead perovskite-based solar cells
Li, D., Liao, P., Shai, X., Huang, W., Liu, S., Li, H., Shen, Y. F., & Wang, M. (2016) · RSC Advances · doi:10.1039/c6ra19801e · Cited by 95
Bae, S.-Y., Lee, S. Y., Kim, J., Umh, H. N., Jeong, J., Bae, S., Yi, J., Kim, Y., & Choi, J. (2019) · Scientific Reports · doi:10.1038/s41598-018-37229-8 · Cited by 74
Lu, J., Chen, S., & Zheng, Q. (2019) · Science China Chemistry · doi:10.1007/s11426-019-9486-0 · Cited by 68
High-Performance CsPbI2Br Perovskite Solar Cells with Zinc and Manganese Doping
Khan, U., Yu, Z., Khan, A. A., Zulfiqar, A., & Ullah, N. (2019) · Nanoscale Research Letters · doi:10.1186/s11671-019-2936-8 · Cited by 61
Influence of O 2 plasma treatment on NiO x layer in perovskite solar cells
Nishihara, Y., Chikamatsu, M., Kazaoui, S., et al. (2018) · Japanese Journal of Applied Physics · doi:10.7567/jjap.57.04fs07 · Cited by 30
Cited by
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
The high open-circuit voltage of perovskite solar cells: a review
Guo, Z., Jena, A. K., Kim, G. M., & Miyasaka, T. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00663d · Cited by 430
Self-citationTemperature-Dependent Optical Band Gap in CsPbBr3, MAPbBr3, and FAPbBr3 Single Crystals
Mannino, G., Deretzis, I., Smecca, E., La Magna, A., Alberti, A., Ceratti, D., & Cahen, D. (2020) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.0c00295 · Cited by 355
A brief review of hole transporting materials commonly used in perovskite solar cells
Li, S., Cao, Y., Li, W., & Bo, Z. (2021) · Rare Metals · doi:10.1007/s12598-020-01691-z · Cited by 346
Qin, M., Chan, P. F., & Lu, X. (2021) · Advanced Materials · doi:10.1002/adma.202105290 · Cited by 337
Metadata
- Authors
- Miyasaka, T., Kulkarni, A., Kim, G. M., Öz, S., & Jena, A. K.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-10-07
- Volume
- 10
- Issue
- 13
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2977911197
- Cited by
- 293
- References
- 107
- FWCI
- 14.01
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.