The DOI matches its Crossref record; 111 of the 111 references it cites were found in a registry or an index.
Materials Design for High‐Safety Sodium‐Ion Battery
Abstract
Sodium‐ion batteries, with their evident superiority in resource abundance and cost, are emerging as promising next‐generation energy storage systems for large‐scale applications, such as smart grids and low‐speed electric vehicles. Accidents related to fires and explosions for batteries are a reminder that safety is prerequisite for energy storage systems, especially when aiming for grid‐scale use. In a typical electrochemical secondary battery, the electrical power is stored and released via processes that generate thermal energy, leading to temperature increments in the battery system, which is the main cause for battery thermal abuse. The investigation of the energy generated during the chemical/electrochemical reactions is of paramount importance for battery safety, unfortunately, it has not received the attention it deserves. In this review, the fundamentals of the heat generation, accumulation, and transportation in a battery system are summarized and recent key research on materials design to improve sodium‐ion battery safety is highlighted. Several effective materials design concepts are also discussed. This review is designed to arouse the attention of researcher and scholars and inspire further improvements in battery safety.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
Arora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
Advances and issues in developing salt-concentrated battery electrolytes
Yamada, Y., Wang, J., Ko, S., Watanabe, E., & Yamada, A. (2019) · Nature Energy · doi:10.1038/s41560-019-0336-z · Cited by 1,788
Materials for lithium-ion battery safety
Liu, K., Liu, Y., Lin, D., Pei, A., & Cui, Y. (2018) · Science Advances · doi:10.1126/sciadv.aas9820 · Cited by 1,625
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
In search of an optimized electrolyte for Na-ion batteries
Ponrouch, A., Marchante, E., Courty, M., Tarascon, J.-M., & Palacín, M. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22258b · Cited by 968
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Fire-extinguishing organic electrolytes for safe batteries
Wang, J., Yamada, Y., Sodeyama, K., Watanabe, E., Takada, K., Tateyama, Y., & Yamada, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0033-8 · Cited by 907
Intercalation chemistry of graphite: alkali metal ions and beyond
Li, Y., Lu, Y., Adelhelm, P., Titirici, M.-M., & Hu, Y.-S. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00162j · Cited by 903
Thermal Runaway of Lithium-Ion Batteries without Internal Short Circuit
Liu, X., Ren, D., Hsu, H., Feng, X., Xu, G.-L., Zhuang, M., Gao, H., Lu, L., Han, X., Chu, Z., et al. (2018) · Joule · doi:10.1016/j.joule.2018.06.015 · Cited by 869
In-operando high-speed tomography of lithium-ion batteries during thermal runaway
Finegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Hunt, I., Mason, T. J., Millichamp, J., Di Michiel, M., Offer, G. J., Hinds, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7924 · Cited by 844
A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions
Wen, J., Yu, Y., & Chen, C. (2012) · Materials Express · doi:10.1166/mex.2012.1075 · Cited by 754
Zhao, C., Liu, L., Qi, X., Lu, Y., Wu, F., Zhao, J., Yu, Y., Hu, Y., & Chen, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703012 · Cited by 738
Non-aqueous electrolytes for sodium-ion batteries
Ponrouch, A., Monti, D., Boschin, A., Steen, B., Johansson, P., & Palacín, M. R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04428b · Cited by 731
Investigation of power battery thermal management by using mini-channel cold plate
Huo, Y., Rao, Z., Liu, X., & Zhao, J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.015 · Cited by 712
Challenges and Perspectives for NASICON‐Type Electrode Materials for Advanced Sodium‐Ion Batteries
Chen, S., Wu, C., Shen, L., Zhu, C., Huang, Y., Xi, K., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700431 · Cited by 705
“Water‐in‐Salt” Electrolyte Makes Aqueous Sodium‐Ion Battery Safe, Green, and Long‐Lasting
Suo, L., Borodin, O., Wang, Y., Rong, X., Sun, W., Fan, X., Xu, S., Schroeder, M. A., Cresce, A. V., Wang, F., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701189 · Cited by 689
Self-citationYao, Q., Chen, L., Zhang, W., Liufu, S., & Chen, X. (2010) · ACS Nano · doi:10.1021/nn1002562 · Cited by 672
Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902852 · Cited by 643
Li, Y., Lu, Y., Zhao, C., Hu, Y.-S., Titirici, M.-M., Li, H., Huang, X., & Chen, L. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.002 · Cited by 642
How lithium dendrites form in liquid batteries
Xiao, J. (2019) · Science · doi:10.1126/science.aay8672 · Cited by 635
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Kim, H., Park, I., Seo, D.-H., Lee, S., Kim, S.-W., Kwon, W. J., Park, Y.-U., Kim, C. S., Jeon, S., & Kang, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3038646 · Cited by 592
Exploring competitive features of stationary sodium ion batteries for electrochemical energy storage
Liu, T., Zhang, Y., Jiang, Z., Zeng, X., Ji, J., Li, Z., Gao, X., Sun, M., Lin, Z., Ling, M., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03727b · Cited by 592
Extremely Stable Sodium Metal Batteries Enabled by Localized High-Concentration Electrolytes
Zheng, J., Chen, S., Zhao, W., Song, J., Engelhard, M. H., & Zhang, J.-G. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01213 · Cited by 579
Quantifying tortuosity in porous Li-ion battery materials
Thorat, I. V., Stephenson, D. E., Zacharias, N. A., Zaghib, K., Harb, J. N., & Wheeler, D. R. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.032 · Cited by 571
Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
Sodium Terephthalate as an Organic Anode Material for Sodium Ion Batteries
Park, Y., Shin, D., Woo, S. H., Choi, N. S., Shin, K. H., Oh, S. M., Lee, K. T., & Hong, S. Y. (2012) · Advanced Materials · doi:10.1002/adma.201201205 · Cited by 517
Structure and Stability of Sodium Intercalated Phases in Olivine FePO4
Moreau, P., Guyomard, D., Gaubicher, J., & Boucher, F. (2010) · Chemistry of Materials · doi:10.1021/cm101377h · Cited by 517
Controlling SEI Formation on SnSb‐Porous Carbon Nanofibers for Improved Na Ion Storage
Ji, L., Gu, M., Shao, Y., Li, X., Engelhard, M. H., Arey, B. W., Wang, W., Nie, Z., Xiao, J., Wang, C., et al. (2014) · Advanced Materials · doi:10.1002/adma.201304962 · Cited by 489
The thermal conductivity of dielectric solids at low temperatures (Theoretical)
Klemens, P. G. (1951) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1951.0147 · Cited by 485
High capacity hard carbon anodes for sodium ion batteries in additive free electrolyte
Ponrouch, A., Goñi, A. R., & Palacín, M. R. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.10.038 · Cited by 475
Lukatskaya, M. R., Feldblyum, J. I., Mackanic, D. G., Lissel, F., Michels, D. L., Cui, Y., & Bao, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00833g · Cited by 470
Flammability of Li-Ion Battery Electrolytes: Flash Point and Self-Extinguishing Time Measurements
Hess, S., Wohlfahrt-Mehrens, M., & Wachtler, M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0121502jes · Cited by 451
Electro-thermal modeling and experimental validation for lithium ion battery
Ye, Y., Shi, Y., Cai, N., Lee, J., & He, X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.027 · Cited by 438
Small things make a big difference: binder effects on the performance of Li and Na batteries
Chou, S.-L., Pan, Y., Wang, J.-Z., Liu, H.-K., & Dou, S.-X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02475c · Cited by 428
Eshetu, G. G., Diemant, T., Hekmatfar, M., Grugeon, S., Behm, R. J., Laruelle, S., Armand, M., & Passerini, S. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.10.040 · Cited by 425
High-Temperature Thermoelectric Properties of NaxCoO2-δ Single Crystals
Fujita, K., Mochida, T., & Nakamura, K. (2001) · Japanese Journal of Applied Physics · doi:10.1143/jjap.40.4644 · Cited by 414
Karimi, G., & Li, X. (2013) · International Journal of Energy Research · doi:10.1002/er.1956 · Cited by 411
Ultrathin Graphite Foam: A Three-Dimensional Conductive Network for Battery Electrodes
Ji, H., Zhang, L., Pettes, M. T., Li, H., Chen, S., Shi, L., Piner, R., & Ruoff, R. S. (2012) · Nano Letters · doi:10.1021/nl300528p · Cited by 410
Kim, H., Shakoor, R. A., Park, C., Lim, S. Y., Kim, J., Jo, Y. N., Cho, W., Miyasaka, K., Kahraman, R., Jung, Y., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201589 · Cited by 407
Interphases in Sodium‐Ion Batteries
Song, J., Xiao, B., Lin, Y., Xu, K., & Li, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703082 · Cited by 389
Lim, S. Y., Kim, H., Shakoor, R. A., Jung, Y., & Choi, J. W. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.015209jes · Cited by 379
Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles
Onda, K., Ohshima, T., Nakayama, M., Fukuda, K., & Araki, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.08.049 · Cited by 375
Na2FeP2O7: A Safe Cathode for Rechargeable Sodium-ion Batteries
Barpanda, P., Liu, G., Ling, C. D., Tamaru, M., Avdeev, M., Chung, S., Yamada, Y., & Yamada, A. (2013) · Chemistry of Materials · doi:10.1021/cm401657c · Cited by 375
Dusastre, V. (2010) · Co-Published with Macmillan Publishers Ltd, UK eBooks · doi:10.1142/7848 · Cited by 366
Fast and reversible thermoresponsive polymer switching materials for safer batteries
Chen, Z., Hsu, P.-C., Lopez, J., Li, Y., To, J. W. F., Liu, N., Wang, C., Andrews, S. C., Liu, J., Cui, Y., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.9 · Cited by 360
Bommier, C., & Ji, X. (2018) · Small · doi:10.1002/smll.201703576 · Cited by 358
High‐Voltage Aqueous Na‐Ion Battery Enabled by Inert‐Cation‐Assisted Water‐in‐Salt Electrolyte
Jiang, L., Liu, L., Yue, J., Zhang, Q., Zhou, A., Borodin, O., Suo, L., Li, H., Chen, L., Xu, K., et al. (2020) · Advanced Materials · doi:10.1002/adma.201904427 · Cited by 351
Wu, X., Cao, Y., Ai, X., Qian, J., & Yang, H. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2013.03.013 · Cited by 329
Development of solid-state electrolytes for sodium-ion battery–A short review
Wang, Y., Song, S., Xu, C., Hu, N., Molenda, J., & Lu, L. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.02.007 · Cited by 326
Ionic liquid based electrolytes for sodium-ion batteries: Na+ solvation and ionic conductivity
Monti, D., Jónsson, E., Palacín, M. R., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.153 · Cited by 321
Liu, G., Ouyang, M., Lu, L., Li, J., & Han, X. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3599-9 · Cited by 319
Fang, W., Kwon, O. J., & Wang, C.-Y. (2010) · International Journal of Energy Research · doi:10.1002/er.1652 · Cited by 314
Water-in-Salt Electrolyte for Potassium-Ion Batteries
Leonard, D. P., Wei, Z., Chen, G., Du, F., & Ji, X. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00009 · Cited by 312
Cui, W., Du, F., Zhao, J., Zhang, W., Yang, Y., Xie, X., & Mai, Y.-W. (2011) · Carbon · doi:10.1016/j.carbon.2010.09.047 · Cited by 294
Comprehensive Insights into the Reactivity of Electrolytes Based on Sodium Ions
Eshetu, G. G., Grugeon, S., Kim, H., Jeong, S., Wu, L., Gachot, G., Laruelle, S., Armand, M. B., & Passerini, S. (2016) · ChemSusChem · doi:10.1002/cssc.201501605 · Cited by 285
Shi, S., Liu, L., Ouyang, C., Wang, D.-S., Wang, Z., Chen, L., & Huang, X. (2003) · Physical Review B · doi:10.1103/physrevb.68.195108 · Cited by 274
Profatilova, I. A., Stock, C., Schmitz, A., Passerini, S., & Winter, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.08.066 · Cited by 273
Highly Stable Sodium Batteries Enabled by Functional Ionic Polymer Membranes
Wei, S., Choudhury, S., Xu, J., Nath, P., Tu, Z., & Archer, L. A. (2017) · Advanced Materials · doi:10.1002/adma.201605512 · Cited by 267
Recent advances in effective protection of sodium metal anode
Fan, L., & Li, X. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.017 · Cited by 255
Stabilizing a High-Energy-Density Rechargeable Sodium Battery with a Solid Electrolyte
Gao, H., Xin, S., Xue, L., & Goodenough, J. B. (2018) · Chem · doi:10.1016/j.chempr.2018.01.007 · Cited by 254
Self-citationSafety Issues in Lithium Ion Batteries: Materials and Cell Design
Wu, X., Song, K., Zhang, X., Hu, N., Li, L., Li, W., Zhang, L., & Zhang, H. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00065 · Cited by 242
Reconstructed Orthorhombic V2O5 Polyhedra for Fast Ion Diffusion in K-Ion Batteries
Zhu, Y.-H., Zhang, Q., Yang, X., Zhao, E.-Y., Sun, T., Zhang, X.-B., Wang, S., Yu, X.-Q., Yan, J.-M., & Jiang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.10.004 · Cited by 236
Lai, Y., Du, S., Ai, L., Ai, L., Cheng, Y., Tang, Y., & Jia, M. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.07.079 · Cited by 234
Ultralow-Concentration Electrolyte for Na-Ion Batteries
Li, Y., Yang, Y., Lu, Y., Zhou, Q., Qi, X., Meng, Q., Rong, X., Chen, L., & Hu, Y.-S. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00337 · Cited by 230
Xia, X., & Dahn, J. R. (2011) · Electrochemical and Solid-State Letters · doi:10.1149/2.002201esl · Cited by 221
Terao, T., Zhi, C., Bando, Y., Mitome, M., Tang, C., & Golberg, D. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp911431f · Cited by 220
Size-dependent thermal conductivity of nanoscale semiconducting systems
Liang, L. H., & Li, B. (2006) · Physical Review B · doi:10.1103/physrevb.73.153303 · Cited by 220
Zheng, J., Zheng, H., Wang, R., Ben, L., Lu, W., Chen, L., Chen, L., & Li, H. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp01968g · Cited by 210
A Plastic–Crystal Electrolyte Interphase for All‐Solid‐State Sodium Batteries
Gao, H., Xue, L., Xin, S., Park, K., & Goodenough, J. B. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702003 · Cited by 210
Self-citationHeat generation in lithium-ion batteries with different nominal capacities and chemistries
Nazari, A., & Farhad, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.126 · Cited by 209
Autonomic Shutdown of Lithium‐Ion Batteries Using Thermoresponsive Microspheres
Baginska, M., Blaiszik, B. J., Merriman, R. J., Sottos, N. R., Moore, J. S., & White, S. R. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100683 · Cited by 205
Electrochemical and thermal properties of hard carbon-type anodes for Na-ion batteries
Zhao, J., Zhao, L., Chihara, K., Okada, S., Yamaki, J.-I., Matsumoto, S., Kuze, S., & Nakane, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.109 · Cited by 182
Visualization of Charge Distribution in a Lithium Battery Electrode
Liu, J., Kunz, M., Chen, K., Tamura, N., & Richardson, T. J. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz100634n · Cited by 179
A Composite Gel–Polymer/Glass–Fiber Electrolyte for Sodium‐Ion Batteries
Gao, H., Guo, B., Song, J., Park, K., & Goodenough, J. B. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402235 · Cited by 178
A Safer Sodium‐Ion Battery Based on Nonflammable Organic Phosphate Electrolyte
Zeng, Z., Jiang, X., Li, R., Yuan, D., Ai, X., Yang, H., & Cao, Y. (2016) · Advanced Science · doi:10.1002/advs.201600066 · Cited by 168
Chen, X., Li, X., Mei, D., Feng, J., Hu, M. Y., Hu, J. Z., Engelhard, M., Zheng, J., Xu, W., Xiao, J., et al. (2013) · ChemSusChem · doi:10.1002/cssc.201300770 · Cited by 160
Shen, W., Li, H., Wang, C., Li, Z., Xu, Q., Liu, H., & Wang, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03519h · Cited by 151
Hwang, J., Yoon, C. S., Belharouak, I., & Sun, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07392a · Cited by 144
Temperature-dependent electrochemical heat generation in a commercial lithium-ion battery
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.015 · Cited by 142
Liu, S., Wang, L., Liu, J., Zhou, M., Nian, Q., Feng, Y., Tao, Z., & Shao, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta09194c · Cited by 140
In Situ Formation of a Stable Interface in Solid-State Batteries
Liu, L., Qi, X., Yin, S., Zhang, Q., Liu, X., Suo, L., Li, H., Chen, L., & Hu, Y. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00857 · Cited by 134
Teng, Y., Zhao, H., Zhang, Z., Zhao, L., Zhang, Y., Li, Z., Xia, Q. H., Du, Z., & Świerczek, K. (2017) · Carbon · doi:10.1016/j.carbon.2017.04.017 · Cited by 128
Luo, W., Zhang, P., Wang, X., Li, Q., Dong, Y., Hua, J., Zhou, L., & Mai, L. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.047 · Cited by 117
Self-citationBuhrmester, C., Moshurchak, L., Wang, R. L., & Dahn, J. R. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2140615 · Cited by 115
High‐Safety Nonaqueous Electrolytes and Interphases for Sodium‐Ion Batteries
Sun, Y., Shi, P., Xiang, H., Liang, X. M., & Yu, Y. M. (2019) · Small · doi:10.1002/smll.201805479 · Cited by 114
Nonaqueous Sodium‐Ion Full Cells: Status, Strategies, and Prospects
Niu, Y., Yin, Y., & Guo, Y. (2019) · Small · doi:10.1002/smll.201900233 · Cited by 114
Amiribavandpour, P., Shen, W., Mu, D., & Kapoor, A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.022 · Cited by 105
Heat Generation and Thermal Transport in Lithium-Ion Batteries: A Scale-Bridging Perspective
Kantharaj, R., & Marconnet, A. M. (2019) · Nanoscale and Microscale Thermophysical Engineering · doi:10.1080/15567265.2019.1572679 · Cited by 90
Microstructural Analysis of the Effects of Thermal Runaway on Li-Ion and Na-Ion Battery Electrodes
Robinson, J. B., Finegan, D. P., Heenan, T. M. M., Smith, K., Kendrick, E., Brett, D. J. L., & Shearing, P. R. (2017) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4038518 · Cited by 83
Li, H., Wang, F., Zhang, C., Ji, W., Qian, J., Cao, Y., Yang, H., & Ai, X. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.07.007 · Cited by 82
Influence of Salt Concentration on the Properties of Sodium‐Based Electrolytes
Geng, C., Buchholz, D., Kim, G., Carvalho, D. V., Zhang, H., Chagas, L. G., & Passerini, S. (2018) · Small Methods · doi:10.1002/smtd.201800208 · Cited by 73
Size dependent thermal conductivity of Si nanosystems based on phonon gas dynamics
Dong, Y., Cao, B., & Guo, Z.-Y. (2013) · Physica E Low-dimensional Systems and Nanostructures · doi:10.1016/j.physe.2013.10.006 · Cited by 71
Nair, J. R., Shaji, I., Ehteshami, N., et al. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b04172 · Cited by 70
Liu, X., Jiang, X., Zhong, F., Feng, X., Chen, W., Ai, X., Yang, H., & Cao, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07614 · Cited by 63
The Al−Na (Aluminum-Sodium) system
Murray, J. L. (1983) · Bulletin of Alloy Phase Diagrams · doi:10.1007/bf02868094 · Cited by 56
Low-Cost, Dendrite-Blocking Polymer-Sb 2 O 3 Separators for Lithium and Sodium Batteries
Ansari, Y., Guo, B., Cho, J. H., Park, K., Song, J., Ellison, C. J., & Goodenough, J. B. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0631410jes · Cited by 54
Yabuuchi, N., Ikeuchi, I., Kubota, K., & Komaba, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09280 · Cited by 52
Thermal stability of Sn anode material with non-aqueous electrolytes in sodium-ion batteries
Lee, Y., Lim, H., Kim, S., Kim, H., Kim, K. J., Lee, K., & Choi, W. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07854h · Cited by 52
Insight into the Origin of Capacity Fluctuation of Na2Ti6O13 Anode in Sodium Ion Batteries
Wu, C., Wu, Z., Zhang, X., Rajagopalan, R., Zhong, B., Xiang, W., Chen, M., Li, H., Chen, T., Wang, E., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11507 · Cited by 51
Huang, W., Marcelli, A., & Xia, D. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700460 · Cited by 43
Strategies to Build High‐Rate Cathode Materials for Na‐Ion Batteries
Lv, W., Huang, Z., Yin, Y., Yao, H., Zhu, H. L., & Guo, Y. (2019) · ChemNanoMat · doi:10.1002/cnma.201900254 · Cited by 38
The contribution of surfaces and interfaces to the crystal thermal conductivity
Kazan, M., & Masri, P. M. (2014) · Surface Science Reports · doi:10.1016/j.surfrep.2013.11.001 · Cited by 15
Cited by
Prussian Blue Analogues for Sodium‐Ion Batteries: Past, Present, and Future
Peng, J., Zhang, W., Liu, Q., Wang, J., Chou, S., Liu, H., & Dou, S. (2022) · Advanced Materials · doi:10.1002/adma.202108384 · Cited by 849
High-safety separators for lithium-ion batteries and sodium-ion batteries: advances and perspective
Zhang, L., Li, X., Yang, M., & Chen, W. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.06.033 · Cited by 587
Emerging Chemistry for Wide-Temperature Sodium-Ion Batteries
Zhang, F., He, B., Xin, Y., Zhu, T., Zhang, Y., Wang, S., Li, W., Yang, Y., & Tian, H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00728 · Cited by 357
A 30‐year overview of sodium‐ion batteries
Gao, Y., Zhang, H., Peng, J., Li, L., Xiao, Y., Li, L., Liu, Y., Qiao, Y., & Chou, S. (2024) · Carbon Energy · doi:10.1002/cey2.464 · Cited by 348
Zhang, W., Lu, J., & Guo, Z. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.015 · Cited by 336
Metadata
- Authors
- Yang, C., Xin, S., Mai, L., & You, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-05-18
- Volume
- 11
- Issue
- 2
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3026943211
- Cited by
- 630
- References
- 111
- FWCI
- 29.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.