The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
An In Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances
Abstract
The development of high‐voltage LiCoO 2 is essential for achieving lithium‐ion batteries with high volumetric energy density, however, it faces a great deal of challenges owing to the materials, structure and interfacial instability issues. In this work, a strategy is developed, through heat annealing a precoated surface layer to in situ form a high‐voltage‐stable surface coating layer, which is demonstrated to be highly effective to improve the high‐voltage performance of LiCoO 2. It is discovered that LiCoO 2 reacts with Li 1.5 Al 0.5 Ti 1.5(PO 4)3 (LATP) at 700 °C to form exclusively spinel phases in addition to Li 3 PO 4, which are structurally coherent to the layered lattice of LiCoO 2. The heat annealing of the precoated thin layer of LATP enables the formation of a high‐quality surface layer. Spinel phases possess high‐voltage‐stable structures with much weaker oxidizing ability of lattice oxygen than layered structure. In addition, the Li 3 PO 4 is a good lithium‐ion conductor with excellent chemical stability at high voltages. All these benefits contribute to the construction of a uniform and conformal high‐voltage‐stable surface layer with favorable lithium conducting kinetics at the LiCoO 2 surface. The modified LiCoO 2 shows excellent 4.6 V high‐voltage cycle performance at both room temperature and 45 °C. The thermal stability is greatly enhanced as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Research on Advanced Materials for Li‐ion Batteries
Li, H., Wang, Z., Chen, L., & Huang, X. (2009) · Advanced Materials · doi:10.1002/adma.200901710 · Cited by 1,803
Self-citationElectrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
Luo, K., Roberts, M. R., Hao, R., Guerrini, N., Pickup, D. M., Liu, Y.-S., Edström, K., Guo, J., Chadwick, A. V., Duda, L. C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2471 · Cited by 1,241
Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V
Zhang, J.-N., Li, Q., Ouyang, C., Yu, X., Ge, M., Huang, X., Hu, E., Ma, C., Li, S., Xiao, R., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0409-z · Cited by 882
Self-citationEvolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2013) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 859
Liu, Q., Su, X., Lei, D., Qin, Y., Wen, J., Guo, F., Wu, Y. A., Rong, Y., Kou, R., Xiao, X., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0180-6 · Cited by 815
First-principles investigation of phase stability inLixCoO2
Van der Ven, A., Aydinol, M. K., Ceder, G., Kresse, G., & Hafner, J. (1998) · Physical Review B · doi:10.1103/physrevb.58.2975 · Cited by 748
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Cited by
Fundamentals and perspectives in developing zinc-ion battery electrolytes: a comprehensive review
Zhang, T., Tang, Y., Guo, S., Cao, X., Pan, A., Fang, G., Zhou, J., & Liang, S. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02620d · Cited by 919
Building Practical High‐Voltage Cathode Materials for Lithium‐Ion Batteries
Xiang, J., Wei, Y., Zhong, Y., Yang, Y., Cheng, H., Yuan, L., Xu, H., & Huang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202200912 · Cited by 394
Structural Understanding for High‐Voltage Stabilization of Lithium Cobalt Oxide
Lin, C., Li, J., Yin, Z., Huang, W., Zhao, Q., Weng, Q., Liu, Q., Sun, J., Chen, G., & Pan, F. (2024) · Advanced Materials · doi:10.1002/adma.202307404 · Cited by 256
Superwettable High-Voltage LiCoO 2 for Low-Temperature Lithium Ion Batteries
Dong, W., Ye, B., Cai, M., Bai, Y., Xie, M., Sun, X., Lv, Z., & Huang, F. (2023) · ACS Energy Letters · doi:10.1021/acsenergylett.2c02434 · Cited by 94
Metadata
- Authors
- Wang, Y., Zhang, Q., Xue, Z., Yang, L., Wang, J., Meng, F., Li, Q., Pan, H., Zhang, J., Jiang, Z., Yang, W., Yu, X., Gu, L., & Li, H.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-06-15
- Volume
- 10
- Issue
- 28
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3034882016
- Cited by
- 342
- References
- 39
- FWCI
- 15.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An In Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances. https://app.cochat.ai/papers/10.1002/aenm.202001413
- The paper
- Wang, Y., Zhang, Q., Xue, Z., Yang, L., Wang, J., Meng, F., Li, Q., Pan, H., Zhang, J., Jiang, Z., Yang, W., Yu, X., Gu, L., & Li, H. (2020). An In Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances. Advanced Energy Materials. https://doi.org/10.1002/aenm.202001413
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.