The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
An In Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances
Abstract
The development of high‐voltage LiCoO 2 is essential for achieving lithium‐ion batteries with high volumetric energy density, however, it faces a great deal of challenges owing to the materials, structure and interfacial instability issues. In this work, a strategy is developed, through heat annealing a precoated surface layer to in situ form a high‐voltage‐stable surface coating layer, which is demonstrated to be highly effective to improve the high‐voltage performance of LiCoO 2. It is discovered that LiCoO 2 reacts with Li 1.5 Al 0.5 Ti 1.5(PO 4)3 (LATP) at 700 °C to form exclusively spinel phases in addition to Li 3 PO 4, which are structurally coherent to the layered lattice of LiCoO 2. The heat annealing of the precoated thin layer of LATP enables the formation of a high‐quality surface layer. Spinel phases possess high‐voltage‐stable structures with much weaker oxidizing ability of lattice oxygen than layered structure. In addition, the Li 3 PO 4 is a good lithium‐ion conductor with excellent chemical stability at high voltages. All these benefits contribute to the construction of a uniform and conformal high‐voltage‐stable surface layer with favorable lithium conducting kinetics at the LiCoO 2 surface. The modified LiCoO 2 shows excellent 4.6 V high‐voltage cycle performance at both room temperature and 45 °C. The thermal stability is greatly enhanced as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Research on Advanced Materials for Li‐ion Batteries
Li, H., Wang, Z., Chen, L., & Huang, X. (2009) · Advanced Materials · doi:10.1002/adma.200901710 · Cited by 1,803
Self-citationElectrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
Luo, K., Roberts, M. R., Hao, R., Guerrini, N., Pickup, D. M., Liu, Y.-S., Edström, K., Guo, J., Chadwick, A. V., Duda, L. C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2471 · Cited by 1,241
Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V
Zhang, J.-N., Li, Q., Ouyang, C., Yu, X., Ge, M., Huang, X., Hu, E., Ma, C., Li, S., Xiao, R., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0409-z · Cited by 882
Self-citationEvolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2013) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 859
Liu, Q., Su, X., Lei, D., Qin, Y., Wen, J., Guo, F., Wu, Y. A., Rong, Y., Kou, R., Xiao, X., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0180-6 · Cited by 815
First-principles investigation of phase stability inLixCoO2
Van der Ven, A., Aydinol, M. K., Ceder, G., Kresse, G., & Hafner, J. (1998) · Physical Review B · doi:10.1103/physrevb.58.2975 · Cited by 748
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Nam, K., Bak, S., Hu, E., Yu, X., Zhou, Y., Wang, X., Wu, L., Zhu, Y., Chung, K. Y., & Yang, X. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200693 · Cited by 594
Self-citationLi‐ and Mn‐Rich Cathode Materials: Challenges to Commercialization
Zheng, J., Myeong, S., Cho, W., Yan, P., Xiao, J., Wang, C., Cho, J., & Zhang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601284 · Cited by 513
Self-citationZhang, J.-N., Li, Q., Wang, Y., Zheng, J., Yu, X., & Li, H. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.016 · Cited by 473
Self-citationQian, J., Liu, L., Yang, J., Li, S., Wang, X., Zhuang, H. L., & Lu, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-07296-6 · Cited by 397
Increasing Poly(ethylene oxide) Stability to 4.5 V by Surface Coating of the Cathode
Nie, K., Wang, X., Qiu, J., Wang, Y., Yang, Q., Xu, J., Yu, X., Li, H., Huang, X., & Chen, L. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02739 · Cited by 326
Self-citationLi, Q., Wang, Y., Wang, X., Sun, X., Zhang, J.-N., Yu, X., & Li, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16727 · Cited by 319
Self-citationAppapillai, A. T., Mansour, A. N., Cho, J., & Shao‐Horn, Y. (2007) · Chemistry of Materials · doi:10.1021/cm0715390 · Cited by 295
Wang, L., Ma, J., Wang, C., Yu, X., Liu, R., Jiang, F., Sun, X., Du, A., Zhou, X., & Cui, G. (2019) · Advanced Science · doi:10.1002/advs.201900355 · Cited by 248
Self-citationA first-order Mott transition in LixCoO2
Marianetti, C. A., Kotliar, G., & Ceder, G. (2004) · Nature Materials · doi:10.1038/nmat1178 · Cited by 214
Takamatsu, D., Koyama, Y., Orikasa, Y., Mori, S., Nakatsutsumi, T., Hirano, T., Tanida, H., Arai, H., Uchimoto, Y., & Ogumi, Z. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201203910 · Cited by 197
Role of Oxygen Holes inLixCoO2Revealed by Soft X-Ray Spectroscopy
Mizokawa, T., Wakisaka, Y., Sudayama, T., Iwai, C., Miyoshi, K., Takeuchi, J., Wadati, H., Hawthorn, D. G., Regier, T. Z., & Sawatzky, G. A. (2013) · Physical Review Letters · doi:10.1103/physrevlett.111.056404 · Cited by 194
Yang, Q., Huang, J., Li, Y., Wang, Y., Qiu, J., Zhang, J., Yu, H., Yu, X., Li, H., & Chen, L. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.03.076 · Cited by 179
Self-citationZhou, A., Liu, Q., Wang, Y., Wang, W., Yao, X., Hu, W., Zhang, L., Yu, X., Li, J., & Li, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07312g · Cited by 177
Self-citationEnsling, D., Cherkashinin, G., Schmid, S., et al. (2014) · Chemistry of Materials · doi:10.1021/cm501480b · Cited by 154
Wu, N., Zhang, Y., Guo, Y. F., Liu, S., Liu, H., & Wu, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10977 · Cited by 120
Solid-State Chemistries Stable with High-Energy Cathodes for Lithium-Ion Batteries
Nolan, A. M., Liu, Y., & Mo, Y. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01703 · Cited by 115
Thermal stability of electrolytes with LixCoO2 cathode or lithiated carbon anode
Yamaki, J.-I., Baba, Y., Katayama, N., et al. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00254-4 · Cited by 114
Key electronic states in lithium battery materials probed by soft X-ray spectroscopy
Yang, W., Liu, X., Qiao, R., Olalde-Velasco, P., Spear, J. D., Roseguo, L., Pepper, J. X., Chuang, Y., Denlinger, J. D., & Hussain, Z. (2013) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/j.elspec.2013.03.008 · Cited by 112
Self-citationXie, J., Zhao, J., Liu, Y., Wang, H., Liu, C., Wu, T., Hsu, P., Lin, D., Jin, Y., & Cui, Y. (2017) · Nano Research · doi:10.1007/s12274-017-1588-1 · Cited by 103
Zhou, A., Lu, Y., Wang, Q., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.035 · Cited by 95
Zhou, A., Wang, W., Liu, Q., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.050 · Cited by 90
Role of AlF[sub 3] Coating on LiCoO[sub 2] Particles during Cycling to Cutoff Voltage above 4.5 V
Sun, Y., Yoon, C. S., Myung, S., Belharouak, I., & Amine, K. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3236501 · Cited by 80
Orikasa, Y., Takamatsu, D., Yamamoto, K., Koyama, Y., Mori, S., Masese, T. N., Mori, T., Minato, T., Tanida, H., Uruga, T., et al. (2014) · Advanced Materials Interfaces · doi:10.1002/admi.201400195 · Cited by 68
Zhou, A., Dai, X., Lu, Y., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11630 · Cited by 63
Ji, Y., Li, S., Zhong, G., Zhang, Z., Li, Y., McDonald, M. J., & Yang, Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0041513jes · Cited by 49
Byun, S., Choi, J., Roh, Y., Song, D., Ryou, M., & Lee, Y. M. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.135471 · Cited by 36
Zhang, L.-J., Sun, Y.-X., Zhou, Y., Hai, C., Hu, S.-Q., Zeng, J.-B., Shen, Y., Dong, S.-D., Qi, G., & Li, F.-Q. (2018) · Ionics (Kiel) · doi:10.1007/s11581-018-2470-1 · Cited by 32
Polymer Electrolyte Enlightens Wide-Temperature 4.45 V-Class LiCoO2/Li Metal Battery
Zhang, M., Zhang, J., Yang, J., Du, X., Chen, Z., Chen, K., Lu, C., Zhang, H., Dong, T., Li, J., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1501910jes · Cited by 15
Self-citation
Cited by
Fundamentals and perspectives in developing zinc-ion battery electrolytes: a comprehensive review
Zhang, T., Tang, Y., Guo, S., Cao, X., Pan, A., Fang, G., Zhou, J., & Liang, S. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02620d · Cited by 919
Building Practical High‐Voltage Cathode Materials for Lithium‐Ion Batteries
Xiang, J., Wei, Y., Zhong, Y., Yang, Y., Cheng, H., Yuan, L., Xu, H., & Huang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202200912 · Cited by 394
Structural Understanding for High‐Voltage Stabilization of Lithium Cobalt Oxide
Lin, C., Li, J., Yin, Z., Huang, W., Zhao, Q., Weng, Q., Liu, Q., Sun, J., Chen, G., & Pan, F. (2024) · Advanced Materials · doi:10.1002/adma.202307404 · Cited by 256
Superwettable High-Voltage LiCoO 2 for Low-Temperature Lithium Ion Batteries
Dong, W., Ye, B., Cai, M., Bai, Y., Xie, M., Sun, X., Lv, Z., & Huang, F. (2023) · ACS Energy Letters · doi:10.1021/acsenergylett.2c02434 · Cited by 94
Metadata
- Authors
- Wang, Y., Zhang, Q., Xue, Z., Yang, L., Wang, J., Meng, F., Li, Q., Pan, H., Zhang, J., Jiang, Z., Yang, W., Yu, X., Gu, L., & Li, H.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-06-15
- Volume
- 10
- Issue
- 28
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3034882016
- Cited by
- 342
- References
- 39
- FWCI
- 15.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.