The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A CFD–PBM coupled model for gas–liquid flows
Abstract
A computational fluid dynamics–population balance model (CFD‐PBM) coupled model was developed that combines the advantages of CFD to calculate the entire flow field and of the PBM to calculate the local bubble size distribution. Bubble coalescence and breakup were taken into account to determine the evolution of the bubble size. Different bubble breakup and coalescence models were compared. An algorithm was proposed for computing the parameters based on the bubble size distribution, including the drag force, transverse lift force, wall lubrication force, turbulent dispersion force, and bubble‐induced turbulence. With the bubble breakup and coalescence models and the interphase force formulations in this work, the CFD‐PBM coupled model can give a unified description for both the homogeneous and the heterogeneous regimes. Good agreement was obtained with the experimental results for the gas holdup, liquid velocity, and bubble size distribution. © 2005 American Institute of Chemical Engineers AIChE J, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Drag coefficient and relative velocity in bubbly, droplet or particulate flows
Ishii, M., & Zuber, N. (1979) · AIChE Journal · doi:10.1002/aic.690250513 · Cited by 2,031
Some problems in particle technology
Hulburt, H. M., & Katz, S. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85047-8 · Cited by 1,670
Theoretical model for drop and bubble breakup in turbulent dispersions
Luo, H., & Svendsen, H. F. (1996) · AIChE Journal · doi:10.1002/aic.690420505 · Cited by 1,250
On the solution of population balance equations by discretization—I. A fixed pivot technique
Kumar, S., & Ramkrishna, D. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(96)88489-2 · Cited by 1,109
Dynamic simulation of dispersed gas-liquid two-phase flow using a discrete bubble model
Delnoij, E., Lammers, F. A., Kuipers, J. A. M., & van Swaaij, W. P. M. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(96)00515-5 · Cited by 314
A novel theoretical breakup kernel function for bubbles/droplets in a turbulent flow
Wang, T., Wang, J., & Jin, Y. (2003) · Chemical Engineering Science · doi:10.1016/j.ces.2003.07.009 · Cited by 260
Self-citation
Cited by
A literature review on mechanisms and models for the coalescence process of fluid particles
Liao, Y., & Lucas, D. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.02.020 · Cited by 663
Joshi, J. B., Nere, N. K., Rane, C. V., Murthy, B. N., Mathpati, C. S., Patwardhan, A. W., & Ranade, V. V. (2011) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.20465 · Cited by 131
Gupta, A., & Roy, S. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.11.012 · Cited by 125
Metadata
- Authors
- Wang, T., Wang, J., & Jin, Y.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2005-09-13
- Volume
- 52
- Issue
- 1
- Pages
- 125-140
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2163129205
- Cited by
- 199
- References
- 6
- FWCI
- 3.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A CFD–PBM coupled model for gas–liquid flows. https://app.cochat.ai/papers/10.1002/aic.10611
- The paper
- Wang, T., Wang, J., & Jin, Y. (2006). A CFD–PBM coupled model for gas–liquid flows. AIChE Journal. https://doi.org/10.1002/aic.10611
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.