The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Total projection to latent structures for process monitoring
Abstract
Partial least squares or projection to latent structures (PLS) has been used in multivariate statistical process monitoring similar to principal component analysis. Standard PLS often requires many components or latent variables (LVs), which contain variations orthogonal to Y and useless for predicting Y. Further, the X‐residual of PLS usually has quite large variations, thus is not proper to monitor with the Q‐statistic. To reduce false alarm and missing alarm rates of faults related to Y, a total projection to latent structures (T‐PLS) algorithm is proposed in this article. The new structure divides the X‐space into four parts instead of two parts in standard PLS. The properties of T‐PLS are studied in detail, including its relationship to the orthogonal PLS. Further study shows the space decomposition on X‐space induced by T‐PLS. Fault detection policy is developed based on the T‐PLS. Case studies on two simulation examples show the effectiveness of the T‐PLS based fault detection methods. © 2009 American Institute of Chemical Engineers AIChE J, 2010
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A plant-wide industrial process control problem
Downs, J. J., & Vogel, E. F. (1993) · Computers & Chemical Engineering · doi:10.1016/0098-1354(93)80018-i · Cited by 3,348
Orthogonal projections to latent structures (O‐PLS)
Trygg, J., & Wold, S. (2002) · Journal of Chemometrics · doi:10.1002/cem.695 · Cited by 2,447
SIMPLS: An alternative approach to partial least squares regression
de Jong, S. (1993) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(93)85002-x · Cited by 1,905 · cited 1×
“As rank(Tortho) 1⁄4 rank(To) 1⁄4 A 1, if (19) does not hold, there must exist A linearly independent columns in [To, Tortho], so that span{Tortho, To} 1⁄4 span{T}.”
BackgroundStatistical process monitoring: basics and beyond
Joe Qin, S. (2003) · Journal of Chemometrics · doi:10.1002/cem.800 · Cited by 1,582
Multivariate SPC Charts for Monitoring Batch Processes
Nomikos, P., & MacGregor, J. F. (1995) · Technometrics · doi:10.1080/00401706.1995.10485888 · Cited by 1,422
Fault Detection and Diagnosis in Industrial Systems
Braatz, L. H. C. (2001) · Measurement Science and Technology · doi:10.1088/0957-0233/12/10/706 · Cited by 1,416
Fault Detection and Diagnosis in Industrial Systems
Chiang, L. H., Russell, E. L., & Braatz, R. D. (2001) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-0347-9 · Cited by 1,318
Orthogonal signal correction of near-infrared spectra
Wold, S., Antti, H., Lindgren, F., & Öhman, J. (1998) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(98)00109-9 · Cited by 1,089
The process chemometrics approach to process monitoring and fault detection
Wise, B. M., & Gallagher, N. B. (1996) · Journal of Process Control · doi:10.1016/0959-1524(96)00009-1 · Cited by 852
Process monitoring and diagnosis by multiblock PLS methods
MacGregor, J. F., Jaeckle, C., Kiparissides, C., & Koutoudi, M. (1994) · AIChE Journal · doi:10.1002/aic.690400509 · Cited by 773
Chiang, L. H., Russell, E. L., & Braatz, R. D. (2000) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(99)00061-1 · Cited by 630
Reconstruction-based contribution for process monitoring
Alcala, C. F., & Qin, S. J. (2009) · Automatica · doi:10.1016/j.automatica.2009.02.027 · Cited by 567
Self-citationGeneralized contribution plots in multivariate statistical process monitoring
Westerhuis, J. A., Gurden, S. P., & Smilde, A. K. (2000) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(00)00062-9 · Cited by 507
Fault detection and diagnosis based on modified independent component analysis
Lee, J., Qin, S. J., & Lee, I. (2006) · AIChE Journal · doi:10.1002/aic.10978 · Cited by 419
Self-citationDayal, B. S., & MacGregor, J. F. (1997) · Journal of Chemometrics · doi:10.1002/(sici)1099-128x(199701)11:1<73::aid-cem435>3.0.co;2-# · Cited by 400
Geometric properties of partial least squares for process monitoring
Li, G., Qin, S. J., & Zhou, D. (2010) · Automatica · doi:10.1016/j.automatica.2009.10.030 · Cited by 368
Self-citationMissing data methods in PCA and PLS: Score calculations with incomplete observations
Nelson, P. R. C., Taylor, P. A., & MacGregor, J. F. (1996) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(96)00007-x · Cited by 358
Determining the number of principal components for best reconstruction
Qin, S. J., & Dunia, R. (2000) · Journal of Process Control · doi:10.1016/s0959-1524(99)00043-8 · Cited by 221
Self-citationKaneko, H., Arakawa, M., & Funatsu, K. (2008) · AIChE Journal · doi:10.1002/aic.11648 · Cited by 151
Lee, G., Han, C., & Yoon, E. S. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049624u · Cited by 144
Sensor fault detection, isolation and reconstruction using nonlinear principal component analysis
Harkat, M. F., Djelel, S., Doghmane, N., et al. (2007) · Machine Intelligence Research · doi:10.1007/s11633-007-0149-6 · Cited by 47
Cited by
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716
Survey on data-driven industrial process monitoring and diagnosis
Qin, S. J. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.09.004 · Cited by 1,470
Self-citationYin, S., Ding, S. X., Haghani, A., Hao, H., & Zhang, P. (2012) · Journal of Process Control · doi:10.1016/j.jprocont.2012.06.009 · Cited by 1,294
Data Mining and Analytics in the Process Industry: The Role of Machine Learning
Ge, Z., Song, Z., Ding, S. X., & Huang, B. (2017) · IEEE Access · doi:10.1109/access.2017.2756872 · Cited by 922
“[158] proposed a total projection form of the PLS model for the purpose of process monitoring.”
BackgroundImproved PLS Focused on Key-Performance-Indicator-Related Fault Diagnosis
Yin, S., Zhu, X., & Kaynak, O. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345331 · Cited by 537
Metadata
- Authors
- Zhou, D., Li, G., & Qin, S. J.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2009-08-26
- Volume
- 56
- Issue
- 1
- Pages
- 168-178
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2103711750
- Cited by
- 472
- References
- 21
- FWCI
- 12.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.