The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Influence of void fraction calculation on fidelity of CFD‐DEM simulation of gas‐solid bubbling fluidized beds
Abstract
The correct calculation of cell void fraction is pivotal in accurate simulation of two‐phase flows using a computational fluid dynamics‐discrete element method (CFD‐DEM) approach. Two classical approaches for void fraction calculations (i.e., particle centroid method or PCM and analytical approach) were examined, and the accuracy of these methodologies in predicting the particle‐fluid flow characteristics of bubbling fluidized beds was investigated. It was found that there is a critical cell size (3.82 particle diameters) beyond which the PCM can achieve the same numerical stability and prediction accuracy as those of the analytical approach. There is also a critical cell size (1/19.3 domain size) below which meso‐scale flow structures are resolved. Moreover, a lower limit of cell size (1.63 particle diameters) was identified to satisfy the assumptions of CFD‐DEM governing equations. A reference map for selecting the ideal computational cell size and the suitable approach for void fraction calculation was subsequently developed. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2000–2018, 2014
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Discrete particle simulation of two-dimensional fluidized bed
Tsuji, Y., Kawaguchi, T., & Tanaka, T. (1993) · Powder Technology · doi:10.1016/0032-5910(93)85010-7 · Cited by 2,462
Multiphase Flow And Fluidization: Continuum And Kinetic Theory Descriptions
Gidaspow, D. (2012) · Cited by 2,114
Fluid Mechanical Description of Fluidized Beds. Equations of Motion
Anderson, T. B., & Jackson, R. (1967) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160024a007 · Cited by 2,066
Multiphase flow and fluidization: Continuum and kinetic theory descriptions
Sinclair, J. L. (1995) · Powder Technology · doi:10.1016/0032-5910(95)90055-1 · Cited by 1,895
Discrete particle simulation of particulate systems: A review of major applications and findings
Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.08.006 · Cited by 1,473
Assessment of rolling resistance models in discrete element simulations
Ai, J., Chen, J.-F., Rotter, J. M., & Ooi, J. Y. (2011) · Powder Technology · doi:10.1016/j.powtec.2010.09.030 · Cited by 1,073
Hoomans, B. P. B., Kuipers, J. A. M., Briels, W. J., & van Swaaij, W. P. M. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00271-5 · Cited by 1,019
Xu, B. H., & Yu, A. B. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(97)00081-x · Cited by 959
The role of meso-scale structures in rapid gas–solid flows
Agrawal, K., Loezos, P. N., Syamlal, M., & Sundaresan, S. (2001) · Journal of Fluid Mechanics · doi:10.1017/s0022112001005663 · Cited by 759
Rolling friction in the dynamic simulation of sandpile formation
Zhou, Y. C., Wright, B. D., Yang, R. Y., Xu, B. H., & Yu, A. B. (1999) · Physica A: Statistical Mechanics and its Applications · doi:10.1016/s0378-4371(99)00183-1 · Cited by 717
Cited by
Continuum theory for dense gas-solid flow: A state-of-the-art review
Wang, J. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2019.115428 · Cited by 368
A review of recent development for the CFD-DEM investigations of non-spherical particles
Ma, H., Zhou, L., Liu, Z., Chen, M., Xia, X., & Zhao, Y. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117972 · Cited by 286
Review and implementation of CFD-DEM applied to chemical process systems
Golshan, S., Sotudeh-Gharebagh, R., Zarghami, R., Mostoufi, N., Blais, B., & Kuipers, J. A. M. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115646 · Cited by 270
Progress in CFD Simulations of Fluidized Beds for Chemical and Energy Process Engineering
Alobaid, F., Almohammed, N., Massoudi Farid, M., May, J., Rößger, P., Richter, A., & Epple, B. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100930 · Cited by 266
Computational Fluid Dynamics of Reacting Flows at Surfaces: Methodologies and Applications
Micale, D., Ferroni, C., Uglietti, R., Bracconi, M., & Maestri, M. (2022) · Chemie Ingenieur Technik · doi:10.1002/cite.202100196 · Cited by 41
Metadata
- Authors
- Peng, Z., Doroodchi, E., Luo, C., & Moghtaderi, B.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2014-03-11
- Volume
- 60
- Issue
- 6
- Pages
- 2000-2018
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2042309274
- Cited by
- 359
- References
- 44
- FWCI
- 10.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of void fraction calculation on fidelity of CFD‐DEM simulation of gas‐solid bubbling fluidized beds. https://app.cochat.ai/papers/10.1002/aic.14421
- The paper
- Peng, Z., Doroodchi, E., Luo, C., & Moghtaderi, B. (2014). Influence of void fraction calculation on fidelity of CFD‐DEM simulation of gas‐solid bubbling fluidized beds. AIChE Journal. https://doi.org/10.1002/aic.14421
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.