The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Pore and solid diffusion models for fixed‐bed adsorbers
Abstract
Most models for fixed bed adsorbers have used either the homogeneoussolid or pore diffusion model for the pellets. When the adsorption isotherm is linear, the two models can lead to identical breakthrough curves. The conditions for this equivalence are presented here. It is shown that one of the bulk flow factors that was included in the formulation of one pore diffusion model will be significant only for feedstreams containing a relatively high concentration of adsorbate. The prosity factor of the pore model is shown to be very important, especially as the porosity decreases. The importance of the two diffusional models with respect to the predicted breakthrough curves is demonstrated. For comparable beds, it is shown that the breakthrough curve based on the homogeneous model is delayed with respect to that based on the pore model at early times, regardless of the shape of the isotherm. Finally, the various possible solutions for an irreverisble isotherm are reviewed for each of the models, and a solution is presented for the general case of a pore model with an outside film resistance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pore- and Solid-Diffusion Kinetics in Fixed-Bed Adsorption under Constant-Pattern Conditions
Hall, K. R., Eagleton, L. C., Acrivos, A., & Vermeulen, T. (1966) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160018a011 · Cited by 2,819
Glueckauf, E. (1955) · Trans. Faraday Soc. · doi:10.1039/tf9555101540 · Cited by 967
Fluid-Particle and Intraparticle Mass Transport Rates in Slurries
Furusawa, T., & Smith, J. M. (1973) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160046a009 · Cited by 395
Theory for Irreversible and Constant-Pattern Solid Diffusion
Vermeulen, T. (1953) · Industrial & Engineering Chemistry · doi:10.1021/ie50524a025 · Cited by 353
Kinetics of a Fixed Bed System for Solid Diffusion into Spherical Particles
Rosen, J. B. (1952) · The Journal of Chemical Physics · doi:10.1063/1.1700431 · Cited by 341
General Numerical Solution for Solid Diffusion in Fixed Beds
Rosen, J. B. (1954) · Industrial & Engineering Chemistry · doi:10.1021/ie50536a026 · Cited by 179
Measurement of diffusion coefficients
Carman, P. C., & Haul, R. (1954) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1954.0056 · Cited by 148
Kasten, P. R., Lapidus, L., & Amundson, N. R. (1952) · The Journal of Physical Chemistry · doi:10.1021/j150498a004 · Cited by 71
The heating or cooling of a solid sphere in a well-stirred fluid
Paterson, S. (1947) · Proceedings of the Physical Society · doi:10.1088/0959-5309/59/1/310 · Cited by 54
Nonisothermal adsorption in fixed beds
Meyer, O. A., & WEBER, T. W. (1967) · AIChE Journal · doi:10.1002/aic.690130314 · Cited by 51
Self-citation
Cited by
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Guidelines for the use and interpretation of adsorption isotherm models: a review
Al-Ghouti, M. A., & Da'ana, D. A. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122383 · Cited by 3,535
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957
“The Kiselev adsorption isotherm equation also known as localized monomolecular layer model [38] is only valid for surface coverage θ > 0.”
BackgroundTran, H. N., You, S.-J., Hosseini-Bandegharaei, A., & Chao, H.-P. (2017) · Water Research · doi:10.1016/j.watres.2017.04.014 · Cited by 2,902
Adsorption isotherm models: Classification, physical meaning, application and solving method
Wang, J., & Guo, X. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.127279 · Cited by 2,289
Kannan, N., & Sundaram, M. M. (2001) · Dyes and Pigments · doi:10.1016/s0143-7208(01)00056-0 · Cited by 1,969
A.O, D. (2012) · IOSR Journal of Applied Chemistry · doi:10.9790/5736-0313845 · Cited by 1,934
Adsorption of methylene blue onto bamboo-based activated carbon: Kinetics and equilibrium studies
HAMEED, B., DIN, A., & AHMAD, A. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.07.049 · Cited by 1,513
Tan, I. A. W., Ahmad, A. L., & Hameed, B. H. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.10.031 · Cited by 1,178
Gupta, V. K., & Nayak, A. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.11.006 · Cited by 975
Experimental and kinetic studies on methylene blue adsorption by coir pith carbon
KAVITHA, D., & NAMASIVAYAM, C. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2005.12.008 · Cited by 974
Removal of copper(II) ions from aqueous solution onto chitosan and cross-linked chitosan beads
Wan Ngah, W. S., Endud, C. S., & Mayanar, R. (2002) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(01)00113-4 · Cited by 938
Adsorption of dyes on chitin. I. Equilibrium studies
McKay, G., Blair, H. S., & Gardner, J. R. (1982) · Journal of Applied Polymer Science · doi:10.1002/app.1982.070270827 · Cited by 926
Removal and recovery of Chrysoidine Y from aqueous solutions by waste materials
Mittal, A., Mittal, J., Malviya, A., & Gupta, V. K. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.01.007 · Cited by 859
Hameed, B. H., & Ahmad, A. A. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.08.084 · Cited by 830
Mohammadi, N., Khani, H., Gupta, V. K., Amereh, E., & Agarwal, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.06.067 · Cited by 818
Activated lignin-chitosan extruded blends for efficient adsorption of methylene blue
Albadarin, A. B., Collins, M. N., Naushad, M., Shirazian, S., Walker, G., & Mangwandi, C. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.08.089 · Cited by 796
Martins, A. C., Pezoti, O., Cazetta, A. L., Bedin, K. C., Yamazaki, D. A. S., Bandoch, G. F. G., Asefa, T., Visentainer, J. V., & Almeida, V. C. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.017 · Cited by 779
Adsorption of methylene blue from aqueous solution by graphene
Liu, T., Li, Y., Du, Q., Sun, J., Jiao, Y., Yang, G., Wang, Z., Xia, Y., Zhang, W., Wang, K., et al. (2012) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2011.10.019 · Cited by 772
Ai, L., Zhang, C., & Chen, Z. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.06.068 · Cited by 771
Equilibrium and kinetic studies on basic dye adsorption by oil palm fibre activated carbon
Tan, I. A. W., Hameed, B. H., & Ahmad, A. L. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.09.010 · Cited by 766
Gupta, V. K., Gupta, M., & Sharma, S. (2001) · Water Research · doi:10.1016/s0043-1354(00)00389-4 · Cited by 765
Malik, P. K. (2004) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.05.022 · Cited by 756
AL-Othman, Z. A., Ali, R., & Naushad, M. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.048 · Cited by 748
Adsorption of basic dye (methylene blue) onto activated carbon prepared from rattan sawdust
Hameed, B. H., Ahmad, A. L., & Latiff, K. N. A. (2007) · Dyes and Pigments · doi:10.1016/j.dyepig.2006.05.039 · Cited by 743
Ai, L., Zhang, C., Liao, F., Wang, Y., Li, M., Meng, L., & Jiang, J. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.10.041 · Cited by 737
Tan, I. A. W., Ahmad, A. L., & Hameed, B. H. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.08.025 · Cited by 730
Removal of the hazardous dye rhodamine B through photocatalytic and adsorption treatments
Jain, R., Mathur, M., Sikarwar, S., & Mittal, A. (2007) · Journal of Environmental Management · doi:10.1016/j.jenvman.2006.11.002 · Cited by 714
Mouni, L., Belkhiri, L., Bollinger, J.-C., Bouzaza, A., Assadi, A., Tirri, A., Dahmoune, F., Madani, K., & Remini, H. (2018) · Applied Clay Science · doi:10.1016/j.clay.2017.11.034 · Cited by 712
Hameed, B. H., Tan, I. A. W., & Ahmad, A. L. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.01.028 · Cited by 696
Cazetta, A. L., Vargas, A. M. M., Nogami, E. M., Kunita, M. H., Guilherme, M. R., Martins, A. C., Silva, T. L., Moraes, J. C. G., & Almeida, V. C. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.08.058 · Cited by 653
Adsorptive removal of methylene blue by rhamnolipid-functionalized graphene oxide from wastewater
Wu, Z., Zhong, H., Yuan, X., Wang, H., Wang, L., Chen, X., Zeng, G., & Wu, Y. (2014) · Water Research · doi:10.1016/j.watres.2014.09.026 · Cited by 639
Badruddoza, A. Z. M., Shawon, Z. B. Z., Tay, W. J. D., Hidajat, K., & Uddin, M. S. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.08.030 · Cited by 636
Bhattacharya, A. K., Naiya, T. K., Mandal, S. N., & Das, S. K. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.05.021 · Cited by 633
Isotherm models for adsorption of heavy metals from water - a review
Chen, X., Hossain, M. F., Duan, C., Lu, J., Tsang, Y. F., Islam, M. S., & Zhou, Y. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.135545 · Cited by 623
Adsorptive removal of phosphate from aqueous solutions using iron oxide tailings
Zeng, L., Li, X., & Liu, J. (2004) · Water Research · doi:10.1016/j.watres.2003.12.009 · Cited by 602
Sorption nonideality during organic contaminant transport in porous media
Brusseau, M. L., Rao, P. S. C., & Gillham, R. W. (1989) · Critical Reviews in Environmental Control · doi:10.1080/10643388909388358 · Cited by 579
Saleh, T. A. (2015) · Environmental Science and Pollution Research · doi:10.1007/s11356-015-4866-z · Cited by 578
Mall, I. D., Srivastava, V. C., Agarwal, N. K., & Mishra, I. M. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.03.027 · Cited by 577
Saleh, T. A. (2016) · Desalination and Water Treatment · doi:10.1080/19443994.2015.1036784 · Cited by 569
Batch and column sorption of arsenic onto iron-impregnated biochar synthesized through hydrolysis
Hu, X., Ding, Z., Zimmerman, A. R., Wang, S., & Gao, B. (2015) · Water Research · doi:10.1016/j.watres.2014.10.009 · Cited by 566
KARAGOZ, S., TAY, T., UCAR, S., & ERDEM, M. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.12.019 · Cited by 542
Removal of lead (II) and copper (II) from aqueous solution using pomegranate peel as a new adsorbent
El-Ashtoukhy, E.-S. Z., Amin, N. K., & Abdelwahab, O. (2008) · Desalination · doi:10.1016/j.desal.2007.01.206 · Cited by 530
Equilibrium sorption isotherm for metal ions on tree fern
Ho, Y. S., Huang, C. T., & Huang, H. W. (2002) · Process Biochemistry · doi:10.1016/s0032-9592(02)00036-5 · Cited by 527
Mittal, A., Malviya, A., Kaur, D., Mittal, J., & Kurup, L. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.02.028 · Cited by 526
Yousef, R. I., El-Eswed, B., & Al-Muhtaseb, A. H. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.05.012 · Cited by 521
Iram, M., Guo, C., Guan, Y., Ishfaq, A., & Liu, H. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.05.119 · Cited by 518
Tan, I. A. W., Ahmad, A. L., & Hameed, B. H. (2008) · Desalination · doi:10.1016/j.desal.2007.07.005 · Cited by 512
Preparation of graphene oxide aerogel and its adsorption for Cu2+ ions
Mi, X., Huang, G., Xie, W., Wang, W., Liu, Y., & Gao, J. (2012) · Carbon · doi:10.1016/j.carbon.2012.06.013 · Cited by 507
Robati, D. (2013) · Journal of Nanostructure in Chemistry · doi:10.1186/2193-8865-3-55 · Cited by 501
Yang, J., & Qiu, K. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.09.019 · Cited by 499
Removal of dyes using agricultural waste as low-cost adsorbents: a review
Bharathi, K. S., & Ramesh, S. T. (2013) · Applied Water Science · doi:10.1007/s13201-013-0117-y · Cited by 493
Ahmad, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.06.060 · Cited by 480
Amin, N. K. (2008) · Desalination · doi:10.1016/j.desal.2007.01.203 · Cited by 478
Relevance of isotherm models in biosorption of pollutants by agricultural byproducts
Rangabhashiyam, S., Anu, N., Giri Nandagopal, M. S., & Selvaraju, N. (2014) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2014.01.014 · Cited by 478
Adsorption of Zn(II) from aqueous solution by using different adsorbents
Bhattacharya, A. K., Mandal, S. N., & Das, S. K. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.06.012 · Cited by 475
Özcan, A., Öncü, E. M., & Özcan, A. S. (2006) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.11.017 · Cited by 466
Adsorptive removal of naproxen and clofibric acid from water using metal-organic frameworks
Hasan, Z., Jeon, J., & Jhung, S. H. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.01.005 · Cited by 456
Removal of basic dye from aqueous solution using tree fern as a biosorbent
Ho, Y.-S., Chiang, T.-H., & Hsueh, Y.-M. (2005) · Process Biochemistry · doi:10.1016/j.procbio.2003.11.035 · Cited by 456
Gupta, V. K., Suhas, Ali, I., & Saini, V. K. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie034218g · Cited by 427
Crini, G. (2008) · Dyes and Pigments · doi:10.1016/j.dyepig.2007.07.001 · Cited by 420
Malachite green adsorption by rattan sawdust: Isotherm, kinetic and mechanism modeling
Hameed, B. H., & El-Khaiary, M. I. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.02.054 · Cited by 411
Adsorption of Cationic Dye (Methylene Blue) from Water Using Polyaniline Nanotubes Base
Ayad, M. M., & El-Nasr, A. A. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp103780w · Cited by 411
Equilibrium and kinetics of biosorption of cadmium(II) and copper(II) ions by wheat straw
Dang, V. B. H., Doan, H. D., Dang-Vu, T., & Lohi, A. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.05.031 · Cited by 404
Mercury sorption by silica/carbon nanotubes and silica/activated carbon: a comparison study
Saleh, T. A. (2015) · Journal of Water Supply: Research and Technology - Aqua · doi:10.2166/aqua.2015.050 · Cited by 403
A Comparative Study of Adsorbents Prepared from Industrial Wastes for Removal of Dyes
Jain, A. K., Gupta, V. K., Bhatnagar, A., & Suhas (2003) · Separation Science and Technology · doi:10.1081/ss-120016585 · Cited by 398
Kumar, P. S., Ramalingam, S., Kirupha, S. D., Murugesan, A., Vidhyadevi, T., & Sivanesan, S. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.12.010 · Cited by 398
Adsorption of Acid Blue 193 from aqueous solutions onto BTMA-bentonite
Özcan, A. S., Erdem, B., & Özcan, A. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.001 · Cited by 398
Ahmad, M. A., & Alrozi, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.04.018 · Cited by 396
Removal of Cr6+ and Ni2+ from aqueous solution using bagasse and fly ash
Rao, M., Parwate, A. V., & Bhole, A. G. (2002) · Waste Management · doi:10.1016/s0956-053x(02)00011-9 · Cited by 387
Adsorption kinetics and isotherm models of heavy metals by various adsorbents: An overview
Wang, J., & Guo, X. (2023) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2023.2221157 · Cited by 385
Mohan, D., Singh, K. P., & Singh, V. K. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0400898 · Cited by 378
A comparative adsorption/biosorption study of mono-chlorinated phenols onto various sorbents
Aksu, Z., & Yener, J. (2001) · Waste Management · doi:10.1016/s0956-053x(01)00006-x · Cited by 376
Tan, I. A. W., Ahmad, A. L., & Hameed, B. H. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.04.031 · Cited by 375
The sorption of lead(II) ions on rice husk ash
Naiya, T. K., Bhattacharya, A. K., Mandal, S., & Das, S. K. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.07.119 · Cited by 374
Removal of Dyes from Wastewater Using Flyash, a Low-Cost Adsorbent
Mohan, D., Singh, K. P., Singh, G., & Kumar, K. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010667+ · Cited by 372
Kilic, M., Apaydin-Varol, E., & Pütün, A. E. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.02.051 · Cited by 372
Annadurai, G., Ling, L. Y., & Lee, J.-F. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.07.002 · Cited by 369
Arsenic removal from aqueous solutions by adsorption on red mud
Soner Altundoğan, H., Altundoğan, S., Tümen, F., & Bildik, M. (2000) · Waste Management · doi:10.1016/s0956-053x(00)00031-3 · Cited by 366
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.11.023 · Cited by 365
Gupta, V. K., Mittal, A., Krishnan, L., & Gajbe, V. (2004) · Separation and Purification Technology · doi:10.1016/j.seppur.2004.01.008 · Cited by 364
MITTAL, A. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.10.017 · Cited by 359
Ai, L., Huang, H., Chen, Z., Wei, X., & Jiang, J. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.08.028 · Cited by 357
Polymer functionalized nanocomposites for metals removal from water and wastewater: An overview
Lofrano, G., Carotenuto, M., Libralato, G., Domingos, R. F., Markus, A., Dini, L., Gautam, R. K., Baldantoni, D., Rossi, M., Sharma, S. K., et al. (2016) · Water Research · doi:10.1016/j.watres.2016.01.033 · Cited by 350
Adsorption of Acid Blue 193 from aqueous solutions onto DEDMA-sepiolite
OZCAN, A., ONCU, E., & OZCAN, A. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.08.037 · Cited by 356
Gupta, V. K., Mittal, A., Jhare, D., & Mittal, J. (2012) · RSC Advances · doi:10.1039/c2ra21351f · Cited by 356
Comparative evaluation of sorption kinetics and isotherms of pyrene onto microplastics
Wang, W., & Wang, J. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2017.11.078 · Cited by 356
Calcined graphene/MgAl-layered double hydroxides for enhanced Cr(VI) removal
Yuan, X., Wang, Y., Wang, J., Zhou, C., Tang, Q., & Rao, X. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.01.090 · Cited by 350
Liang, S., Guo, X., Feng, N., & Tian, Q. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.09.116 · Cited by 350
Venkata Mohan, S., Chandrasekhar Rao, N., & Karthikeyan, J. (2002) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(01)00348-x · Cited by 348
Singh, K. P., Mohan, D., Sinha, S., Tondon, G. S., & Gosh, D. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020800d · Cited by 348
Wang, L., Zhang, J., Zhao, R., Li, Y., Li, C., & Zhang, C. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.02.099 · Cited by 346
Bashir, M. J. K., Aziz, H. A., Yusoff, M. S., & Adlan, M. N. (2010) · Desalination · doi:10.1016/j.desal.2009.12.002 · Cited by 344
Liao, P., Zhan, Z., Dai, J., Wu, X., Zhang, W., Wang, K., & Yuan, S. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.04.118 · Cited by 342
Kinetics and diffusion processes in colour removal from effluent using wood as an adsorbent
McKay, G., & Poots, V. J. P. (1980) · Journal of Chemical Technology and Biotechnology · doi:10.1002/jctb.503300134 · Cited by 336
Hasan, Z., Choi, E.-J., & Jhung, S. H. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.01.002 · Cited by 327
Adsorption of heavy metal ions from aqueous solutions by bio-char, a by-product of pyrolysis
Kılıç, M., Kırbıyık, Ç., Çepelioğullar, Ö., & Pütün, A. E. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.07.033 · Cited by 326
Özcan, A., Ömeroğlu, Ç., Erdoğan, Y., & Özcan, A. S. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.138 · Cited by 316
Sharma, P., & Das, M. R. (2013) · Journal of Chemical & Engineering Data · doi:10.1021/je301020n · Cited by 312
Ahmad, M. A., & Rahman, N. K. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.03.045 · Cited by 311
Metadata
- Authors
- Weber, T. W., & Chakravorti, R. K.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 1974-03
- Volume
- 20
- Issue
- 2
- Pages
- 228-238
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2136983589
- Cited by
- 2,573
- References
- 15
- FWCI
- 12.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.