The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Robust nonlinear model predictive control of batch processes
Abstract
NMPC explicitly addresses constraints and nonlinearities during the feedback control of batch processes. This NMPC algorithm also explicitly takes parameter uncertainty into account in the state estimation and state feedback controller designs. An extended Kalman filter estimates the process noise covariance matrix from the parameter uncertainty description and employs a sequential integration and correction strategy to reduce biases in the state estimates due to parameter uncertainty. The shrinking horizon NMPC algorithm minimizes a weighted sum of the nominal performance objective, an estimate of the variance of the performance objective, and an integral of the deviation of the control trajectory from the nominal optimal control trajectory. The robust performance is quantified by estimates of the distribution of the performance index along the batch run obtained by a series expansion about the control trajectory. The control and analysis approaches are applied to a simulated batch crystallization process with a realistic uncertainty description. The proposed robust NMPC algorithm improves the robust performance by a factor of six compared to open loop optimal control, and a factor of two compared to nominal NMPC. Monte Carlo simulations support the results obtained by the distributional robustness analysis technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Constrained model predictive control: Stability and optimality
Mayne, D. Q., Rawlings, J. B., Rao, C. V., & Scokaert, P. O. M. (2000) · Automatica · doi:10.1016/s0005-1098(99)00214-9 · Cited by 8,736
Stochastic Processes and Filtering Theory
(1970) · Mathematics in Science and Engineering · doi:10.1016/s0076-5392(09)x6022-4 · Cited by 7,302
Model predictive control: Theory and practice—A survey
García, C. E., Prett, D. M., & Morari, M. (1989) · Automatica · doi:10.1016/0005-1098(89)90002-2 · Cited by 5,284
Dynamic matrix control¿A computer control algorithm
Cutler, C. R., & Ramaker, B. L. (1980) · IEEE Transactions on Automatic Control · doi:10.1109/jacc.1980.4232009 · Cited by 1,699
Some problems in particle technology
Hulburt, H. M., & Katz, S. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85047-8 · Cited by 1,670
Parameter Estimation in Engineering and Science
de Oliveira, J. T., Beck, J. V., & Arnold, K. J. (1979) · International Statistical Review / Revue Internationale de Statistique · doi:10.2307/1403212 · Cited by 1,480
The stability of constrained receding horizon control
Rawlings, J. B., & Muske, K. R. (1993) · IEEE Transactions on Automatic Control · doi:10.1109/9.241565 · Cited by 1,047
Min-max feedback model predictive control for constrained linear systems
Scokaert, P. O. M., & Mayne, D. Q. (1998) · IEEE Transactions on Automatic Control · doi:10.1109/9.704989 · Cited by 929 · cited 1×
“Alternative approaches have been presented based on a cascade optimizaŽ .tion framework Visser et al., 2000 or on a receding horizon implementation of an open-loop minimax optimization probŽ .lem Scokaert and Mayne, 1998; Alamir and Balloul, 1999 .”
MethodEslami, M. (1978) · Journal of the Franklin Institute · doi:10.1016/0016-0032(78)90124-2 · Cited by 704
Chiang, L. H., Russell, E. L., & Braatz, R. D. (2000) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(99)00061-1 · Cited by 630
Self-citation
Cited by
Assessment of Recent Process Analytical Technology (PAT) Trends: A Multiauthor Review
Simon, L. L., Pataki, H., Marosi, G., Meemken, F., Hungerbühler, K., Baiker, A., Tummala, S., Glennon, B., Kuentz, M., Steele, G., et al. (2015) · Organic Process Research & Development · doi:10.1021/op500261y · Cited by 439
Self-citationNonlinear Model Predictive Control: From Theory to Application
Allgöwer, F., Findeisen, R., & Nagy, Z. K. (2004) · doi:10.6967/jcice.200405.0299 · Cited by 340
Self-citationAdvances and New Directions in Crystallization Control
Nagy, Z. K., & Braatz, R. D. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-081043 · Cited by 332
Self-citationAbu Bakar, M. R., Nagy, Z. K., Saleemi, A. N., & Rielly, C. D. (2009) · Crystal Growth & Design · doi:10.1021/cg800595v · Cited by 258
Self-citation
Metadata
- Authors
- Nagy, Z. K., & Braatz, R. D.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2003-07
- Volume
- 49
- Issue
- 7
- Pages
- 1776-1786
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2033552200
- Cited by
- 306
- References
- 31
- FWCI
- 13.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.