The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Activating Inert, Nonprecious Perovskites with Iridium Dopants for Efficient Oxygen Evolution Reaction under Acidic Conditions
Abstract
Simultaneous realization of improved activity, enhanced stability, and reduced cost remains a desirable yet challenging goal in the search of oxygen evolution electrocatalysts in acid. Herein we report iridium‐containing strontium titanates (Ir‐STO) as active and stable, low‐iridium perovskite electrocatalysts for the oxygen evolution reaction (OER) in acid. The Ir‐STO contains 57 wt % less iridium relative to the benchmark catalyst IrO 2, but it exhibits more than 10 times higher catalytic activity for OER. It is shown to be among the most efficient iridium‐based oxide electrocatalysts for OER in acid. Theoretical results reveal that the incorporation of iridium dopants in the STO matrix activates the intrinsically inert titanium sites, strengthening the surface oxygen adsorption on titanium sites and thereby giving nonprecious titanium catalytic sites that have activities close to or even better than iridium sites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrolysis of water on oxide surfaces
Rossmeisl, J., Qu, Z.-W., Zhu, H., Kroes, G.-J., & Nørskov, J. K. (2007) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2006.11.008 · Cited by 3,096
Identification of Highly Active Fe Sites in (Ni,Fe)OOH for Electrocatalytic Water Splitting
Friebel, D., Louie, M. W., Bajdich, M., Sanwald, K. E., Cai, Y., Wise, A. M., Cheng, M.-J., Sokaras, D., Weng, T.-C., Alonso-Mori, R., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511559d · Cited by 2,732
A highly active and stable IrO x /SrIrO 3 catalyst for the oxygen evolution reaction
Seitz, L. C., Dickens, C. F., Nishio, K., Hikita, Y., Montoya, J., Doyle, A., Kirk, C., Vojvodic, A., Hwang, H. Y., Norskov, J. K., et al. (2016) · Science · doi:10.1126/science.aaf5050 · Cited by 2,196
Earth-Abundant Heterogeneous Water Oxidation Catalysts
Hunter, B. M., Gray, H. B., & Müller, A. M. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00398 · Cited by 1,576
Photochemical Route for Accessing Amorphous Metal Oxide Materials for Water Oxidation Catalysis
Smith, R. D. L., Prévot, M. S., Fagan, R. D., Zhang, Z., Sedach, P. A., Siu, M. K. J., Trudel, S., & Berlinguette, C. P. (2013) · Science · doi:10.1126/science.1233638 · Cited by 1,483
The stability number as a metric for electrocatalyst stability benchmarking
Geiger, S., Kasian, O., Ledendecker, M., Pizzutilo, E., Mingers, A. M., Fu, W. T., Diaz-Morales, O., Li, Z., Oellers, T., Fruchter, L., et al. (2018) · Nature Catalysis · doi:10.1038/s41929-018-0085-6 · Cited by 1,045
Grimaud, A., Demortière, A., Saubanère, M., Dachraoui, W., Duchamp, M., Doublet, M.-L., & Tarascon, J.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.189 · Cited by 649
Yang, L., Yu, G., Ai, X., Yan, W., Duan, H., Chen, W., Li, X., Wang, T., Zhang, C., Huang, X., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-07678-w · Cited by 487
Self-citationIridium-based double perovskites for efficient water oxidation in acid media
Diaz-Morales, O., Raaijman, S., Kortlever, R., Kooyman, P. J., Wezendonk, T., Gascon, J., Fu, W. T., & Koper, M. T. M. (2016) · Nature Communications · doi:10.1038/ncomms12363 · Cited by 468
Highly Active and Stable Iridium Pyrochlores for Oxygen Evolution Reaction
Lebedev, D., Povia, M., Waltar, K., Abdala, P. M., Castelli, I. E., Fabbri, E., Blanco, M. V., Fedorov, A., Copéret, C., Marzari, N., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00766 · Cited by 228
Hybridization-controlled charge transfer and induced magnetism at correlated oxide interfaces
Grisolia, M. N., Varignon, J., Sanchez-Santolino, G., Arora, A., Valencia, S., Varela, M., Abrudan, R., Weschke, E., Schierle, E., Rault, J. E., et al. (2016) · Nature Physics · doi:10.1038/nphys3627 · Cited by 162
Wang, X., Zhuang, L., Jia, Y., Liu, H., Yan, X., Zhang, L., Yang, D., Zhu, Z., & Yao, X. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810199 · Cited by 159
Electron Correlations Engineer Catalytic Activity of Pyrochlore Iridates for Acidic Water Oxidation
Shang, C., Cao, C., Yu, D., Yan, Y. B., Lin, Y., Li, H., Zheng, T., Yan, X., Yu, W., Zhou, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201805104 · Cited by 158
Kumari, S., Ajayi, B. P., Kumar, B., Jasinski, J. B., Sunkara, M. K., & Spurgeon, J. M. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02626a · Cited by 138
Hollandite Structure Kx≈0.25IrO2Catalyst with Highly Efficient Oxygen Evolution Reaction
Sun, W., Song, Y., Gong, X., Cao, L., & Yang, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10159 · Cited by 122
Activation of ultrathin SrTiO 3 with subsurface SrRuO 3 for the oxygen evolution reaction
Akbashev, A. R., Zhang, L., Mefford, J. T., Park, J., Butz, B., Luftman, H. S., Chueh, W. C., & Vojvodić, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00210j · Cited by 120
Trends in adsorption of electrocatalytic water splitting intermediates on cubic ABO 3 oxides
Montoya, J. H., Doyle, A. D., Nørskov, J. K., & Vojvodić, A. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp06539f · Cited by 107
Grafting Cobalt Diselenide on Defective Graphene for Enhanced Oxygen Evolution Reaction
Wang, X., Zhuang, L., He, T., Jia, Y. A., Zhang, L., Yan, X., Gao, M., Du, A., Zhu, Z., Yao, X., et al. (2018) · iScience · doi:10.1016/j.isci.2018.08.013 · Cited by 46
Wang, X., Zhuang, L., Jia, Y. A., Liu, H., Yan, X., Zhang, L., Yang, D., Zhu, Z., & Yao, X. (2018) · Angewandte Chemie · doi:10.1002/ange.201810199 · Cited by 31
Cited by
Recent Development of Oxygen Evolution Electrocatalysts in Acidic Environment
An, L., Wei, C., Lu, M., Liu, H., Chen, Y., Scherer, G. G., Fisher, A. C., Xi, P., Xu, Z. J., & Yan, C. (2021) · Advanced Materials · doi:10.1002/adma.202006328 · Cited by 897
Zhai, P., Zhang, Y., Wu, Y., Gao, J., Zhang, B., Cao, S., Zhang, Y., Li, Z., Sun, L., & Hou, J. (2020) · Nature Communications · doi:10.1038/s41467-020-19214-w · Cited by 673
Recent Progress in Advanced Electrocatalyst Design for Acidic Oxygen Evolution Reaction
Li, L., Wang, P., Shao, Q., & Huang, X. (2021) · Advanced Materials · doi:10.1002/adma.202004243 · Cited by 672
Active Site Engineering in Porous Electrocatalysts
Chen, H., Liang, X., Liu, Y., Ai, X., Asefa, T., & Zou, X. (2020) · Advanced Materials · doi:10.1002/adma.202002435 · Cited by 595
Self-citationStatus and perspectives of key materials for PEM electrolyzer
Zhang, K., Liang, X., Wang, L., Sun, K., Wang, Y., Xie, Z., Wu, Q., Bai, X., Hamdy, M. S., Chen, H., et al. (2022) · Nano Research Energy · doi:10.26599/nre.2022.9120032 · Cited by 497
Self-citation
Metadata
- Authors
- Liang, X., Shi, L., Liu, Y., Chen, H., Si, R., Yan, W., Zhang, Q., Li, G., Yang, L., & Zou, X.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2019-03-04
- Volume
- 58
- Issue
- 23
- Pages
- 7631-7635
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2916972925
- Cited by
- 261
- References
- 19
- FWCI
- 6.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.