The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Abstract
Plant fibers are rich in cellulose and they are a cheap, easily renewable source of fibers with the potential for polymer reinforcement. The presence of surface impurities and the large amount of hydroxyl groups make plant fibers less attractive for reinforcement of polymeric materials. Hemp, sisal, jute, and kapok fibers were subjected to alkalization by using sodium hydroxide. The thermal characteristics, crystallinity index, reactivity, and surface morphology of untreated and chemically modified fibers have been studied using differential scanning calorimetry (DSC), X‐ray diffraction (WAXRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM), respectively. Following alkalization the DSC showed a rapid degradation of the cellulose between 0.8 and 8% NaOH, beyond which degradation was found to be marginal. There was a marginal drop in the crystallinity index of hemp fiber while sisal, jute, and kapok fibers showed a slight increase in crystallinity at caustic soda concentration of 0.8–30%. FTIR showed that kapok fiber was found to be the most reactive followed by jute, sisal, and then hemp fiber. SEM showed a relatively smooth surface for all the untreated fibers; however, after alkalization, all the fibers showed uneven surfaces. These results show that alkalization modifies plant fibers promoting the development of fiber–resin adhesion, which then will result in increased interfacial energy and, hence, improvement in the mechanical and thermal stability of the composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2222–2234, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stamm, A. J. (1964) · Cited by 1,021
The nature of adhesion in composites of modified cellulose fibers and polypropylene
Felix, J. M., & Gatenholm, P. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420307 · Cited by 773
The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites
Bisanda, E. T. N., & Ansell, M. P. (1991) · Composites Science and Technology · doi:10.1016/0266-3538(91)90026-l · Cited by 438
Self-citationMwaikambo, L. Y., & Ansell, M. P. (1999) · Die Angewandte Makromolekulare Chemie · doi:10.1002/(sici)1522-9505(19991201)272:1<108::aid-apmc108>3.0.co;2-9 · Cited by 313
Self-citationCellulose chemistry and its applications
Young, R. A. (1985) · Carbohydrate Research · doi:10.1016/0008-6215(85)85039-4 · Cited by 257
The performance of cotton–kapok fabric–polyester composites
Mwaikambo, L. Y., & Bisanda, E. T. N. (1999) · Polymer Testing · doi:10.1016/s0142-9418(98)00017-8 · Cited by 145
Self-citationEffects of processing conditions on the phase morphology of PC/ABS polymer blends
Chaudhry, B., Hage, E., & Pessan, L. A. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980228)67:9<1503::aid-app1>3.0.co;2-h · Cited by 57
Sun, R.-C., Fang, J., Mott, L., & Bolton, J. (1999) · Holzforschung · doi:10.1515/hf.1999.043 · Cited by 36
Aboul‐Fadl, S. M., Zeronian, S. H., Kamal, M. M., Kim, M. S., & Ellison, M. S. (1985) · Textile Research Journal · doi:10.1177/004051758505500803 · Cited by 34
Cited by
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Extraction of cellulose and preparation of nanocellulose from sisal fibers
Morán, J. I., Alvarez, V. A., Cyras, V. P., & Vázquez, A. (2008) · Cellulose · doi:10.1007/s10570-007-9145-9 · Cited by 1,507
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00226 · Cited by 1,011
M.R., S., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C. I., & Khan, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.083 · Cited by 999
Characterization of natural fiber surfaces and natural fiber composites
Sgriccia, N., Hawley, M. C., & Misra, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.07.007 · Cited by 954
A Review on Pineapple Leaves Fibre and Its Composites
Asim, M., Abdan, K., Jawaid, M., Nasir, M., Dashtizadeh, Z., Ishak, M. R., & Hoque, M. E. (2015) · International Journal of Polymer Science · doi:10.1155/2015/950567 · Cited by 634
Silicon and Plants: Current Knowledge and Technological Perspectives
Luyckx, M., Hausman, J.-F., Lutts, S., & Guerriero, G. (2017) · Frontiers in Plant Science · doi:10.3389/fpls.2017.00411 · Cited by 619
Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites
Majeed, K., Jawaid, M., Hassan, A., Abu Bakar, A., Abdul Khalil, H. P. S., Salema, A. A., & Inuwa, I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.10.044 · Cited by 617
Composition, structure and thermal degradation of hemp cellulose after chemical treatments
Ouajai, S., & Shanks, R. A. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.016 · Cited by 601
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
De Rosa, I. M., Kenny, J. M., Puglia, D., Santulli, C., & Sarasini, F. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.09.013 · Cited by 576
Bioprocess preparation of wheat straw fibers and their characterization
Sain, M., & Panthapulakkal, S. (2006) · Industrial Crops and Products · doi:10.1016/j.indcrop.2005.01.006 · Cited by 575
Fourier Transform Infrared Spectroscopy for Natural Fibres
Fan, M., Dai, D., & Huang, B. (2012) · Fourier Transform - Materials Analysis · doi:10.5772/35482 · Cited by 555
Characterization of treated date palm tree fiber as composite reinforcement
Alawar, A., Hamed, A. M., & Al-Kaabi, K. (2009) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.04.018 · Cited by 530
Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites
Sepe, R., Bollino, F., Boccarusso, L., & Caputo, F. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.09.030 · Cited by 508
Alavudeen, A., Rajini, N., Karthikeyan, S., Thiruchitrambalam, M., & Venkateshwaren, N. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.10.067 · Cited by 493
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
Natural Fiber Reinforced Composites
Fuqua, M. A., Huo, S., & Ulven, C. A. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705409 · Cited by 488
Rangappa, S. M., Siengchin, S., Parameswaranpillai, J., Jawaid, M., & Ozbakkaloglu, T. (2022) · Polymer Composites · doi:10.1002/pc.26413 · Cited by 469
Kamarudin, S. H., Mohd Basri, M. S., Rayung, M., Abu, F., Ahmad, S., Norizan, M. N., Osman, S., Sarifuddin, N., Desa, M. S. Z. M., Abdullah, U. H., et al. (2022) · Polymers · doi:10.3390/polym14173698 · Cited by 459
Natural fiber composites with plant oil-based resin
O'Donnell, A., Dweib, M. A., & Wool, R. P. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.09.024 · Cited by 443
Oil removal from aqueous state by natural fibrous sorbent: An overview
Wahi, R., Chuah, L. A., Choong, T. S. Y., Ngaini, Z., & Nourouzi, M. M. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.04.015 · Cited by 422
Challenges and advancement in water absorption of natural fiber-reinforced polymer composites
Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108083 · Cited by 418
Fiore, V., Scalici, T., & Valenza, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.016 · Cited by 417
Biagiotti, J., Puglia, D., & Kenny, J. M. (2004) · Journal of Natural Fibers · doi:10.1300/j395v01n02_04 · Cited by 412
Sawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.03.008 · Cited by 405
Effects of chemical treatments on hemp fibre structure
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.02.086 · Cited by 399
Puglia, D., Biagiotti, J., & Kenny, J. M. (2005) · Journal of Natural Fibers · doi:10.1300/j395v01n03_03 · Cited by 390
Fiore, V., Scalici, T., Nicoletti, F., Vitale, G., Prestipino, M., & Valenza, A. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.09.028 · Cited by 385
Removal of methylene blue from aqueous solution by adsorption onto pineapple leaf powder
Weng, C.-H., Lin, Y.-T., & Tzeng, T.-W. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.04.080 · Cited by 377
Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction
Sedan, D., Pagnoux, C., Smith, A., & Chotard, T. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.05.019 · Cited by 376
Sreenivasan, V. S., Somasundaram, S., Ravindran, D., Manikandan, V., & Narayanasamy, R. (2011) · Materials & Design · doi:10.1016/j.matdes.2010.06.004 · Cited by 372
Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment
Saha, P., Manna, S., Chowdhury, S. R., Sen, R., Roy, D., & Adhikari, B. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.12.010 · Cited by 368
Sofla, M. R. K., Brown, R. J., Tsuzuki, T., & Rainey, T. J. (2016) · Advances in Natural Sciences: Nanoscience and Nanotechnology · doi:10.1088/2043-6262/7/3/035004 · Cited by 368
Manfredi, L. B., Rodríguez, E. S., Wladyka-Przybylak, M., & Vázquez, A. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.05.003 · Cited by 367
Cherian, B. M., Pothan, L. A., Nguyen-Chung, T., Mennig, G., Kottaisamy, M., & Thomas, S. (2008) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf8003674 · Cited by 363
Oushabi, A., Sair, S., Oudrhiri Hassani, F., Abboud, Y., Tanane, O., & El Bouari, A. (2017) · South African Journal of Chemical Engineering · doi:10.1016/j.sajce.2017.04.005 · Cited by 361
Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties
Ramesh, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.11.001 · Cited by 321
Jute as raw material for the preparation of microcrystalline cellulose
Jahan, M. S., Saeed, A., He, Z., & Ni, Y. (2011) · Cellulose · doi:10.1007/s10570-010-9481-z · Cited by 320
Industrial Hemp Fibers: An Overview
Manaia, J. P., Manaia, A. T., & Rodriges, L. (2019) · Fibers · doi:10.3390/fib7120106 · Cited by 317
Structure and properties of high quality natural cellulose fibers from cornstalks
Reddy, N., & Yang, Y. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.073 · Cited by 311
Alamri, H., & Low, I. M. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.04.002 · Cited by 305
Biopolymer composites: a review
Aaliya, B., Sunooj, K. V., & Lackner, M. (2021) · International Journal of Biobased Plastics · doi:10.1080/24759651.2021.1881214 · Cited by 298
Can flax replace E-glass in structural composites? A small wind turbine blade case study
Shah, D. U., Schubel, P. J., & Clifford, M. J. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.04.027 · Cited by 290
N., S., I., R., & T., R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.127 · Cited by 289
Panthapulakkal, S., Zereshkian, A., & Sain, M. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.02.043 · Cited by 284
Mwaikambo, L. Y., & Ansell, M. P. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-5098-x · Cited by 272
Self-citationStudies on durability of sustainable biobased composites: a review
Chang, B. P., Mohanty, A. K., & Misra, M. (2020) · RSC Advances · doi:10.1039/c9ra09554c · Cited by 270
Characterization of cellulose fibers in Thespesia populnea barks: Influence of alkali treatment
Kathirselvam, M., Kumaravel, A., Arthanarieswaran, V. P., & Saravanakumar, S. S. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.04.063 · Cited by 269
Properties Characterization of Chemically Modified Hemp Hurds
Stevulova, N., Cigasova, J., Estokova, A., Terpakova, E., Geffert, A., Kacik, F., Singovszka, E., & Holub, M. (2014) · Materials · doi:10.3390/ma7128131 · Cited by 258
Modified polyester resins for natural fibre composites
AZIZ, S., ANSELL, M., CLARKE, S., & PANTENY, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.08.005 · Cited by 258
Self-citationSeki, Y., Sarikanat, M., Sever, K., & Durmuşkahya, C. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.03.013 · Cited by 252
A review on physico-mechanical properties of bast fibre reinforced polymer composites
Kiruthika, A. V. (2017) · Journal of Building Engineering · doi:10.1016/j.jobe.2016.12.003 · Cited by 171
Cell wall microstructure, pore size distribution and absolute density of hemp shiv
Jiang, Y., Lawrence, M., Ansell, M. P., & Hussain, A. (2018) · Royal Society Open Science · doi:10.1098/rsos.171945 · Cited by 115
Self-citationSair, S., Oushabi, A., Kammouni, A., Tanane, O., Abboud, Y., Oudrhiri Hassani, F., Laachachi, A., & El Bouari, A. (2017) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2017.10.012 · Cited by 97
Vishnu Vardhini, K., Murugan, R., & Surjit, R. (2018) · Journal of Industrial Textiles · doi:10.1177/1528083717714479 · Cited by 71
Valorization of Hemp Hurds as Bio-Sourced Additives in PLA-Based Biocomposites
Momeni, S., Safder, M., Khondoker, M. A. H., & Elias, A. L. (2021) · Polymers · doi:10.3390/polym13213786 · Cited by 40
Hemp Fibers in Serbia: Cultivation, Processing and Applications
Pejić, B., Vukčević, M., & Kostić, M. (2020) · Sustainable Agriculture Reviews · doi:10.1007/978-3-030-41384-2_4 · Cited by 6
Metadata
- Authors
- Mwaikambo, L. Y., & Ansell, M. P.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2002-03-19
- Volume
- 84
- Issue
- 12
- Pages
- 2222-2234
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2000814017
- Cited by
- 1,694
- References
- 9
- FWCI
- 12.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.