The DOI matches its Crossref record.
Phase behavior and morphology in blends of poly(L‐lactic acid) and poly(butylene succinate)
Abstract
Blends of poly(L‐lactic acid) (PLA) and poly(butylene succinate) (PBS) were prepared with various compositions by a melt‐mixing method and the phase behavior, miscibility, and morphology were investigated using differential scanning calorimetry, wide‐angle X‐ray diffraction, small‐angle X‐ray scattering techniques, and polarized optical microscopy. The blend system exhibited a single glass transition over the entire composition range and its temperature decreased with an increasing weight fraction of the PBS component, but this depression was not significantly large. The DSC thermograms showed two distinct melting peaks over the entire composition range, indicating that these materials was classified as semicrystalline/semicrystalline blends. A depression of the equilibrium melting point of the PLA component was observed and the interaction parameter between PLA and PBS showed a negative value of −0.15, which was derived using the Flory–Huggins equation. Small‐angle X‐ray scattering revealed that, in the blend system, the PBS component was expelled out of the interlamellar regions of PLA, which led to a significant decrease of a long‐period, amorphous layer thickness of PLA. For more than a 40% PBS content, significant crystallization‐induced phase separation was observed by polarized optical microscopy. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 647–655, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Poly(butylene succinate) and its copolymers: Research, development and industrialization
Xu, J., & Guo, B. (2010) · Biotechnology Journal · doi:10.1002/biot.201000136 · Cited by 778
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Compatibilization in bio-based and biodegradable polymer blends
Imre, B., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.019 · Cited by 613
Structure and properties for biomass-based polyester blends of PLA and PBS
Yokohara, T., & Yamaguchi, M. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.01.008 · Cited by 439
Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review
Su, S., Kopitzky, R., Tolga, S., & Kabasci, S. (2019) · Polymers · doi:10.3390/polym11071193 · Cited by 380
Shibata, M., Inoue, Y., & Miyoshi, M. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.065 · Cited by 375
Zhang, K., Mohanty, A. K., & Misra, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3004522 · Cited by 335
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles
Ho, M.-P., Lau, K.-T., Wang, H., & Hui, D. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.05.048 · Cited by 268
Toughening modification of PLLA/PBS blends via in situ compatibilization
Wang, R., Wang, S., Zhang, Y., Wan, C., & Ma, P. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21210 · Cited by 266
Harada, M., Ohya, T., Iida, K., Hayashi, H., Hirano, K., & Fukuda, H. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26717 · Cited by 254
Zhao, X., Liu, J., Li, J., Liang, X., Zhou, W., & Peng, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.091 · Cited by 249
Yeh, J., Tsou, C., Huang, C., Chen, K., Wu, C., & Chai, W. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.30907 · Cited by 199
Toughening of polylactic acid: an overview of research progress
Krishnan, S., Pandey, P., Mohanty, S., & Nayak, S. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098698 · Cited by 147
Hassan, E., Wei, Y., null, H. J., & Muhuo, Y. (2013) · Journal of Fiber Bioengineering and Informatics · doi:10.3993/jfbi03201308 · Cited by 124
Palai, B., Mohanty, S., & Nayak, S. K. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106130 · Cited by 96
Ljungberg, N., Colombini, D., & Wesslén, B. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21163 · Cited by 73
Kang, E. Y., Lih, E., Kim, I. H., Joung, Y. K., & Han, D. K. (2016) · Biomaterials Research · doi:10.1186/s40824-016-0054-6 · Cited by 38
Crystallization and Stereocomplexation of PLA-mb-PBS Multi-Block Copolymers
D’Ambrosio, R., Michell, R., Mincheva, R., Hernández, R., Mijangos, C., Dubois, P., & Müller, A. (2017) · Polymers · doi:10.3390/polym10010008 · Cited by 22
Metadata
- Authors
- Park, J. W., & Im, S. S.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2002-08-06
- Volume
- 86
- Issue
- 3
- Pages
- 647-655
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2062341595
- Cited by
- 240
- References
- 0
- FWCI
- 2.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.