The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal and mechanical characterization of linear low‐density polyethylene/wood flour composites
Open accessAbstract
A linear low‐density polyethylene (LLDPE) matrix was modified with an organic peroxide and by a reaction with maleic anhydride (MAn) and was simultaneously compounded with untreated wood flour in a twin‐screw extruder. The thermal and mechanical properties of the modified LLDPE and the resulting composites were evaluated. The degree of crystallinity was reduced in the modified LLDPE, but it increased with the addition of wood flour for the formation of the composites. Significant improvements in the tensile strength, ductility, and creep resistance were obtained for the MAn‐modified composites. This enhancement in the mechanical behavior could be attributed to an improvement in the compatibility between the filler and the matrix. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2775–2784, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Physical Polymer Science
Sperling, L. H. (2005) · doi:10.1002/0471757128 · Cited by 2,917
Cited by
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
Abu-Jdayil, B., Mourad, A.-H., Hittini, W., Hassan, M., & Hameedi, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.102 · Cited by 638
Araújo, J. R., Waldman, W. R., & De Paoli, M. A. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.07.021 · Cited by 371
The effect of wood extractives on the thermal stability of different wood species
Shebani, A. N., van Reenen, A. J., & Meincken, M. (2008) · Thermochimica Acta · doi:10.1016/j.tca.2008.02.020 · Cited by 257
Thermal and mechanical properties of polypropylene/wood‐flour composites
Ndiaye, D., Matuana, L. M., Morlat‐Therias, S., Vidal, L., Tidjani, A., & Gardette, J. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.32985 · Cited by 59
Zykova, A. K., Pantyukhov, P. V., Mastalygina, E. E., Chaverri-Ramos, C., Nikolaeva, S. G., Saavedra-Arias, J. J., Popov, A. A., Wortman, S. E., & Poletto, M. (2021) · Polymers · doi:10.3390/polym13132138 · Cited by 30
Metadata
- Authors
- Marcovich, N. E., & Villar, M. A.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2003-09-29
- Volume
- 90
- Issue
- 10
- Pages
- 2775-2784
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2079171773
- Cited by
- 177
- References
- 1
- FWCI
- 2.94
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.