The DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index.
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
Abstract
Abstract Energy saving has become a strategic goal in the whole world, that will lead to protect the environment and conserve natural resources. The energy consumption in buildings for heating and cooling is considered as one of the major sources of energy consumption in a lot of countries. Therefore, there is an ongoing search for finding the proper alternatives to preserve energy and minimize energy losses. Subsequently, heat insulators, part of building materials, are steadily getting their importance as a means of saving energy. Although, a lot of insulation materials are used commercially, this part of building construction still faces different difficulties and challenges such as the cost, thermal and mechanical properties, health problems, etc. Current insulation materials used in construction industry are generally polymer based materials such as polystyrene and polyurethane foam. Although these materials have a high performance in thermal insulation, but the environmental impacts in their production processes are significant. Consequently, the researchers find that there is a necessity to develop and come up with insulating materials that possess excellent properties and at the same time, they have less environmental impacts, and are relatively cheap. In this review paper, the researches carried out in the formulation and development of different kinds of thermal insulation in the last decades are presented. The focus was placed on researches utilized of renewable resources and wastes in thermal insulations development. In addition, the light was shed on the composites materials which was developed as a construction material with high thermal insulation capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity
Parker, W. J., Jenkins, R. J., Butler, C. P., & Abbott, G. L. (1961) · Journal of Applied Physics · doi:10.1063/1.1728417 · Cited by 3,978 · cited 1×
“After that, Parker equation [129] and Degiovanni equation [130] were used to calculate thermal diffusivity.”
MethodDHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Jelle, B. P. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.05.015 · Cited by 1,196
Aerogel insulation for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.12.012 · Cited by 1,091
Al-Homoud, D. M. S. (2005) · Building and Environment · doi:10.1016/j.buildenv.2004.05.013 · Cited by 1,019
State of the art in thermal insulation materials and aims for future developments
Papadopoulos, A. M. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2004.05.006 · Cited by 914
A review on insulation materials for energy conservation in buildings
Aditya, L., Mahlia, T. M. I., Rismanchi, B., Ng, H. M., Hasan, M. H., Metselaar, H. S. C., Muraza, O., & Aditiya, H. B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.034 · Cited by 811
An Overview on Silica Aerogels Synthesis and Different Mechanical Reinforcing Strategies
Maleki, H., Durães, L., & Portugal, A. (2014) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2013.10.017 · Cited by 740
Nanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
Cited by
Structure-properties relationships of cellular materials from biobased polyurethane foams
Peyrton, J., & Avérous, L. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100608 · Cited by 282
Rabbat, C., Awad, S., Villot, A., Rollet, D., & Andrès, Y. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111962 · Cited by 183
Evaluation of rubber powder waste as reinforcement of the polyurethane derived from castor oil
Silva, N. G. S., Cortat, L. I. C. O., Orlando, D., & Mulinari, D. R. (2020) · Waste Management · doi:10.1016/j.wasman.2020.07.032 · Cited by 66
Wang, R., Qiao, G., & Song, G. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132051 · Cited by 54
Metadata
- Authors
- Abu-Jdayil, B., Mourad, A.-H., Hittini, W., Hassan, M., & Hameedi, S.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 214
- Pages
- 709-735
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2940979243
- Cited by
- 638
- References
- 121
- FWCI
- 33.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Traditional, state-of-the-art and renewable thermal building insulation materials: An overview. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2019.04.102
- The paper
- Abu-Jdayil, B., Mourad, A.-H., Hittini, W., Hassan, M., & Hameedi, S. (2019). Traditional, state-of-the-art and renewable thermal building insulation materials: An overview. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.04.102
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.