Kinetics of dielectric‐loss microwave degradation of polymers: Lignin
The DOI matches its Crossref record.
Abstract
The rate of product formation as well as detailed product composition were measured in the rapid pyrolysis of a 1.3‐cm cylindrical pellet of lignin, a major component of biomass. Volume heating by dielectric‐loss microwave heating resulted in rapid weight loss with an apparent rate coefficient of 1–5 min−1. Char yield was surprisingly low (33%) owing to the rapid heating rate and high temperature of the pellet. Total gas yield was 38%, of which 12% were simple hydrocarbons and H 2 (both weight percent, of original lignin). Product composition showed extensive secondary reaction at high temperatures evidenced by the significant yields of C 2 H 2,H 2, and condensed aromatics as well as the typical lignin cracking products such as phenols. Poor coupling of microwave energy to lignin required large power settings in order to initiate reaction. Once initiated, the reaction rate was difficult to control because of the exothermic nature of the reactions. Additives of a suitable composition to increase coupling may be a possible solution to this problem and may result in more favorable economics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Lignin Depolymerization and Conversion: A Review of Thermochemical Methods
Pandey, M. P., & Kim, C. S. (2011) · Chemical Engineering & Technology · doi:10.1002/ceat.201000270 · Cited by 1,419
Mechanism study of wood lignin pyrolysis by using TG–FTIR analysis
Liu, Q., Wang, S., Zheng, Y., Luo, Z., & Cen, K. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.03.007 · Cited by 965
Experimental and theoretical investigation of heat and mass transfer processes during wood pyrolysis
Park, W. C., Atreya, A., & Baum, H. R. (2010) · Combustion and Flame · doi:10.1016/j.combustflame.2009.10.006 · Cited by 425
A systematic study of the kinetics of lignin pyrolysis
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2009.10.003 · Cited by 352
Priecel, P., & Lopez-Sanchez, J. A. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03286 · Cited by 330
Zhang, T., Li, X., Qiao, X., Zheng, M., Guo, L., Song, W., & Lin, W. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b00247 · Cited by 167
Hu, J., Xiao, R., Shen, D., & Zhang, H. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.148 · Cited by 117
Ojha, D. K., Viju, D., & Vinu, R. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.084 · Cited by 81
Khanh Tran, Q., Vu Ly, H., Tae Hwang, H., Kim, J., & Kim, S.-S. (2022) · Fuel · doi:10.1016/j.fuel.2022.125472 · Cited by 25
Valorization potential of technical lignins from Norway spruce (Picea abies) via pyrolysis
Ghalibaf, M., Alén, R., Hita, I., Deuss, P. J., Jan Heeres, H., & de Wild, P. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105549 · Cited by 7
Metadata
- Authors
- Chan, R. W., & Krieger, B. B.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1981-05
- Volume
- 26
- Issue
- 5
- Pages
- 1533-1553
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2000369575
- Cited by
- 70
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.