Resorbable materials of poly(L‐lactide). V. Influence of secondary structure on the mechanical properties and hydrolyzability of poly(L‐lactide) fibers produced by a dry‐spinning method
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Fibers of poly(L‐lactide) (PLLA) with a loosened fibrillar structure were produced by solution spinning from a good solvent (chloroform) in the presence of various additives (camphor, polyurethanes). No decrease in mechanical properties was observed as compared with PLLA fibers spun from a good solvent only. In vitro degradation studies showed that the rate of degradation of PLLA fibers with the loosened fibrillar structure was increased approaching that found for fibers composed of the homopolymer of glycolide or copolymers of glycolide and L‐lactide. Helices on the fiber surface caused by melt fracture during spinning of the fibers leads to higher knot strengths of the hot‐drawn PLLA fiber up to 70% of the tensile strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Gogolewski, S., & Pennings, A. J. (1982) · Die Makromolekulare Chemie, Rapid Communications · doi:10.1002/marc.1982.030031201 · Cited by 83
Self-citation
Cited by
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Late degradation tissue response to poly(?-lactide) bone plates and screws
Bergsma, J. (1995) · Biomaterials · doi:10.1016/0142-9612(95)91092-d · Cited by 799
Mano, J. F., Sousa, R. A., Boesel, L. F., Neves, N. M., & Reis, R. L. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.09.001 · Cited by 450
Resorbable materials of poly(l-lactide)
Leenslag, J. W., Pennings, A. J., Bos, R. R. M., Rozema, F. R., & Boering, G. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90121-9 · Cited by 329
Self-citation
Metadata
- Authors
- Leenslag, J. W., Gogolewski, S., & Pennings, A. J.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1984-09
- Volume
- 29
- Issue
- 9
- Pages
- 2829-2842
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2068681999
- Cited by
- 114
- References
- 2
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.